Difference between revisions of "Board:a-trend/atc-6220"

From coreboot
Jump to: navigation, search
(Start A-Trend ATC-6220 status page.)
 
m (ATC-6220 updates.)
Line 44: Line 44:
 
|Mini_PCI_cards_status = N/A
 
|Mini_PCI_cards_status = N/A
 
|PCIX_cards_status = N/A
 
|PCIX_cards_status = N/A
|PCI_cards_status = Untested
+
|PCI_cards_status = OK
|PCI_cards_comments =  
+
|PCI_cards_comments = All 4 PCI slots tested using a PCI graphics card.
|AGP_cards_status = Untested
+
|AGP_cards_status = OK
|AGP_cards_comments =  
+
|AGP_cards_comments = Tested: AGP graphics card.
 
|PCIE_cards_status = N/A
 
|PCIE_cards_status = N/A
 
|PCIE_x1_status = N/A
 
|PCIE_x1_status = N/A
Line 58: Line 58:
  
 
|Floppy_status = Untested
 
|Floppy_status = Untested
|COM1_status = Untested
+
|COM1_status = OK
 +
|COM1_comments = Works, but there's a small Baud rate fix needed in coreboot. For now, it works using using 230400 (instead of 115200) as Baud rate.
 
|COM2_status = Untested
 
|COM2_status = Untested
 
|PP_status = OK
 
|PP_status = OK
Line 78: Line 79:
 
|ACPI_comments = There's no ACPI implementation for this board.
 
|ACPI_comments = There's no ACPI implementation for this board.
 
|SMBus_status = N/A
 
|SMBus_status = N/A
|Reboot_status = Untested
+
|Reboot_status = OK
|Poweroff_status = Untested
+
|Poweroff_status = No
|Poweroff_comments =  
+
|Poweroff_comments = Running '''halt''' doesn't properly power-down the board.
 
|LEDs_status = N/A
 
|LEDs_status = N/A
 
|HPET_status = N/A
 
|HPET_status = N/A

Revision as of 00:18, 21 September 2010

This page describes how to use coreboot on the ATC-6220 mainboard. It is maintained by Uwe Hermann.

Status

Device/functionality Status Comments
CPU
CPU works OK
L1 cache enabled OK CPU: L1 I cache: 16K, L1 D cache: 16K
L2 cache enabled OK CPU: L2 cache: 256K
L3 cache enabled N/A
Multiple CPU support N/A
Multi-core support N/A
Hardware virtualization N/A
RAM
EDO N/A
SDRAM OK
SO-DIMM N/A
DDR N/A
DDR2 N/A
DDR3 N/A
Dual channel support N/A
ECC support WIP Not yet supported by the coreboot 440BX code, but it's on our TODO list.
On-board Hardware
On-board IDE 3.5" OK
On-board IDE 2.5" N/A
On-board SATA N/A
On-board SCSI N/A
On-board USB Untested
On-board VGA N/A
On-board ethernet N/A
On-board audio N/A
On-board modem N/A
On-board FireWire N/A
On-board smartcard reader N/A
On-board CompactFlash N/A
On-board PCMCIA N/A
Add-on slots/cards
ISA add-on cards Untested
Audio/Modem-Riser (AMR/CNR) cards N/A
PCI add-on cards OK All 4 PCI slots tested using a PCI graphics card.
Mini-PCI add-on cards N/A
PCI-X add-on cards N/A
AGP graphics cards OK Tested: AGP graphics card.
PCI Express x1 add-on cards N/A
PCI Express x2 add-on cards N/A
PCI Express x4 add-on cards N/A
PCI Express x8 add-on cards N/A
PCI Express x16 add-on cards N/A
PCI Express x32 add-on cards N/A
HTX add-on cards N/A
Legacy / Super I/O
Floppy Untested
Serial port 1 (COM1) OK Works, but there's a small Baud rate fix needed in coreboot. For now, it works using using 230400 (instead of 115200) as Baud rate.
Serial port 2 (COM2) Untested
Parallel port OK Doing modprobe ppdev works, but no further tests were performed.
PS/2 keyboard OK
PS/2 mouse Untested
Game port N/A
Infrared
PC speaker OK
DiskOnChip N/A
Miscellaneous
Sensors / fan control OK Works fine, you can use the w83781d, i2c-piix4, and eeprom kernel modules.
Hardware watchdog N/A
SMBus N/A
CAN bus N/A
CPU frequency scaling Untested
Other powersaving features N/A
ACPI No There's no ACPI implementation for this board.
Reboot OK
Poweroff No Running halt doesn't properly power-down the board.
Suspend Unknown
Nonstandard LEDs N/A
High precision event timers (HPET) N/A
Random number generator (RNG) N/A
Wake on modem ring
Wake on LAN
Wake on keyboard
Wake on mouse
Flashrom OK


Public domain I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.