Board:asrock/939a785gmh

From coreboot
Revision as of 22:13, 16 August 2010 by Lennart (Talk | contribs)

Jump to: navigation, search

Official site

Status

For the entries marked as WIP, please see below.

Device/functionality Status Comments
CPU
CPU works OK AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
L1 cache enabled Unknown
L2 cache enabled Unknown
L3 cache enabled Unknown
Multiple CPU support N/A
Multi-core support Unknown
Hardware virtualization Unknown
RAM
EDO N/A
SDRAM N/A
SO-DIMM N/A
DDR WIP
DDR2 N/A
DDR3 N/A
Dual channel support Unknown
ECC support N/A
On-board Hardware
On-board IDE 3.5" OK checked with a CD-ROM drive
On-board IDE 2.5" N/A
On-board SATA WIP
On-board SCSI N/A
On-board USB OK only checked two ports so far, for mouse and keyboard.
On-board VGA WIP
On-board ethernet OK
On-board audio OK
On-board modem N/A
On-board FireWire N/A
On-board smartcard reader N/A
On-board CompactFlash N/A
On-board PCMCIA N/A
Add-on slots/cards
ISA add-on cards N/A
Audio/Modem-Riser (AMR/CNR) cards N/A
PCI add-on cards OK
Mini-PCI add-on cards N/A
PCI-X add-on cards N/A
AGP graphics cards N/A
PCI Express x1 add-on cards OK
PCI Express x2 add-on cards N/A
PCI Express x4 add-on cards N/A
PCI Express x8 add-on cards N/A
PCI Express x16 add-on cards Unknown
PCI Express x32 add-on cards N/A
HTX add-on cards N/A
Legacy / Super I/O
Floppy Unknown
Serial port 1 (COM1) Unknown
Serial port 2 (COM2) N/A
Parallel port Unknown
PS/2 keyboard Unknown
PS/2 mouse Unknown
Game port N/A
Infrared Unknown
PC speaker Unknown
DiskOnChip N/A
Miscellaneous
Sensors / fan control Unknown
Hardware watchdog Unknown
SMBus Unknown
CAN bus N/A
CPU frequency scaling Unknown
Other powersaving features Unknown
ACPI Unknown
Reboot No
Poweroff Unknown
Suspend Unknown
Nonstandard LEDs N/A
High precision event timers (HPET) Unknown
Random number generator (RNG) N/A
Wake on modem ring Unknown
Wake on LAN Unknown
Wake on keyboard Unknown
Wake on mouse Unknown
Flashrom OK

Known Issues

RAM

  • Using 4 512 MB units only 375 MB were accessible.

SATA

  • Sometimes the link seems slow. It doesn't happen every boot. If it happens, SeaBios needs a long time to load grub. Also, the devicenodes in /dev are not in the right order according to the ports on the board. There are also the following messages during boot:
ata2: link is slow to respond, please be patient (ready=0)
ata2: COMRESET failed (errno=-16)
ata2: link is slow to respond, please be patient (ready=0)
ata2: COMRESET failed (errno=-16)
ata2: link is slow to respond, please be patient (ready=0)
ata2: COMRESET failed (errno=-16)
ata2: limiting SATA link speed to 1.5 Gbps
ata2: link is slow to respond, please be patient (ready=0)
ata2: COMRESET failed (errno=-16)
Apart from the slowness all 5 ports seemed to work.
  • If the above error didn't occur all 5 ports seemed to work flawlessly.

Onboard VGA

  • In regard to the vendor BIOS the output numbers were switched. DVI-0 (vendor BIOS) was named HDMI-0 using coreboot.
  • Both VGA and DVI output worked.