Board:asus/a8v-e deluxe

From coreboot
Revision as of 01:48, 30 March 2008 by Uwe (Talk | contribs)

Jump to: navigation, search

This page describes how to use coreboot on the ASUS A8V-E Deluxe mainboard. It is maintained by Uwe Hermann.

The ASUS A8V-E Deluxe.
The ASUS A8V-E Deluxe.
The BIOS socket.

Status

Device/functionality Status Comments
CPU
CPU works OK I'm using: CPU model AMD Sempron(tm) Processor 3200+
L1 cache enabled OK CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
L2 cache enabled OK CPU: L2 Cache: 256K (64 bytes/line)
L3 cache enabled N/A
Multiple CPU support N/A
Multi-core support Untested I don't have a multicore CPU to test with.
Hardware virtualization Untested
RAM
EDO N/A
SDRAM N/A
SO-DIMM N/A
DDR OK Tested: one 256 MB DIMM in slot DIMM_B1 (see manual).
DDR2 N/A
DDR3 N/A
Dual channel support Untested
ECC support Untested
On-board Hardware
On-board IDE 3.5" WIP Doesn't seem to work, yet.
On-board IDE 2.5" N/A
On-board SATA OK Tested: SATA port 1 (hda in FILO). SATA port 2 doesn't seem to work, yet.
On-board SCSI Unknown
On-board USB OK Tested: USB keyboard on all 8 USB ports.
On-board VGA N/A
On-board ethernet OK
On-board audio OK
On-board modem N/A
On-board FireWire Untested
On-board smartcard reader N/A
On-board CompactFlash N/A
On-board PCMCIA N/A
Add-on slots/cards
ISA add-on cards N/A
Audio/Modem-Riser (AMR/CNR) cards N/A
PCI add-on cards OK Tested: PCI VGA card in all 3 PCI slots.
Mini-PCI add-on cards Unknown
PCI-X add-on cards Unknown
AGP graphics cards N/A
PCI Express x1 add-on cards OK Tested: PCI Express x1 network card in the first slot (nearer to CPU). Not sure if the other slot works ok.
PCI Express x2 add-on cards N/A
PCI Express x4 add-on cards N/A
PCI Express x8 add-on cards N/A
PCI Express x16 add-on cards OK Tested: PCI Express x16 VGA card. Works using the ati X11 driver.
PCI Express x32 add-on cards N/A
HTX add-on cards N/A
Legacy / Super I/O
Floppy WIP Doesn't seem to work, yet. Might be a Super I/O problem.
Serial port 1 (COM1) OK
Serial port 2 (COM2) N/A
Parallel port OK Tested: Parallel-port JTAG adapter using openocd, works fine after modprobe ppdev.
PS/2 keyboard OK
PS/2 mouse OK
Game port OK Works fine after modprobe analog and modprobe ns558. Tested using jscalibrator.
Infrared
PC speaker OK
DiskOnChip N/A
Miscellaneous
Sensors / fan control OK The k8temp module loads fine, the sensors tool outputs the CPU temperature correctly. The w83627ehf module (for various temperatures and fan speeds) works fine. Also, the eeprom and i2c-viapro / i2c-dev modules load fine.
Hardware watchdog Untested The VT8237R seems to have a watchdog timer, but it's untested.
SMBus Unknown
CAN bus N/A
CPU frequency scaling WIP Doesn't work, yet.
Other powersaving features N/A
ACPI Untested Exact status unknown/untested. Originally implemented for ASUS A8V-E SE, might need some changes. Reboot and poweroff do work ok, though.
Reboot OK
Poweroff OK
Suspend Unknown
Nonstandard LEDs OK There's a power-on LED on the board PCB, it lights up when the board is powered up.
High precision event timers (HPET) OK The dmesg output has ACPI: HPET id: 0x102282a0 base: 0xfed00000, and hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, and hpet0: 3 32-bit timers, 14318180 Hz. Powertop reports a very good value of 9 wake-ups-from-idle per second, which indicates that HPET support might work ok.
Random number generator (RNG) N/A
Wake on modem ring Untested
Wake on LAN Untested
Wake on keyboard Untested
Wake on mouse Untested
Flashrom OK Works fine with coreboot and with the proprietary BIOS. The board/chipset/flashrom can decode 1MB chips fine.

Hardware

  • AMD K8
  • VIA K8T890
  • VIA VT8237R
  • Winbond W83627EHF

lspci -tvnn

-[0000:00]-+-00.0  VIA Technologies, Inc. K8T890 Host Bridge [1106:0238]
           +-00.1  VIA Technologies, Inc. K8T890 Host Bridge [1106:1238]
           +-00.2  VIA Technologies, Inc. K8T890 Host Bridge [1106:2238]
           +-00.3  VIA Technologies, Inc. K8T890 Host Bridge [1106:3238]
           +-00.4  VIA Technologies, Inc. K8T890 Host Bridge [1106:4238]
           +-00.5  VIA Technologies, Inc. K8T890 I/O APIC Interrupt Controller [1106:5238]
           +-00.7  VIA Technologies, Inc. K8T890 Host Bridge [1106:7238]
           +-01.0-[0000:01]--
           +-02.0-[0000:02]--
           +-03.0-[0000:03]--
           +-03.1-[0000:04]--
           +-03.2-[0000:05]----00.0  Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362]
           +-03.3-[0000:06]--
           +-07.0 Marvell Technology Group Ltd. 88W8310 and 88W8000G [Libertas] 802.11g client chipset [11ab:1fa7]
           +-08.0 Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023]
           +-0f.0  VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149]
           +-0f.1  VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571]
           +-10.0  VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
           +-10.1  VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
           +-10.2  VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
           +-10.3  VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
           +-10.4  VIA Technologies, Inc. USB 2.0 [1106:3104]
           +-11.0  VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
           +-11.5  VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059]
           +-11.6  VIA Technologies, Inc. AC'97 Modem Controller [1106:3068]
           +-18.0  Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
           +-18.1  Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
           +-18.2  Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
           \-18.3  Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]

Building coreboot

Currently there is no special target for the ASUS A8V-E Deluxe in coreboot. Instead, we use the ASUS A8V-E SE target.

First, place your payload (usually FILO) into /tmp/filo.elf and build coreboot as usual:

$ cd target
$ ./buildtarget asus/a8v-e_se && cd asus/a8v-e_se/asus_a8v-e_se && make

The resulting coreboot.rom (512 KB) can now be flashed on a ROM chip.

It's possible to use a 1 MB ROM chip on this board. You'll have to change ROM_SIZE in targets/asus/a8v-e_se/Config.lb to make coreboot.rom bigger for that.

Booting coreboot

  • Booting from SATA port 1 works using FILO and this config (I have my root filesystem on /dev/sda2 as viewed from Linux):
 kernel=hda2:/vmlinuz initrd=/initrd.img root=/dev/sda2 console=tty0 console=ttyS0,115200
  • Booting from SATA port 2 doesn't yet work, I'll investigate.
  • Booting from IDE doesn't yet work, I'll investigate.

Comparing boot time

TODO.

BIOS Power up — OS loader OS loader — Linux Linux — shell Summary
Vendor BIOS (boot from SATA disk)  ?  ?  ?  ?
coreboot (boot from SATA disk)  ?  ?  ?  ?
Public domain I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.