Difference between revisions of "Board:asus/m2n-e"

From coreboot
Jump to: navigation, search
(ASUS M2N-E status page.)
 
m
(2 intermediate revisions by the same user not shown)
Line 24: Line 24:
 
|RAM_DDR2_comments = Tested: One 512 MB DIMM in slot DIMM_A2 (see manual).
 
|RAM_DDR2_comments = Tested: One 512 MB DIMM in slot DIMM_A2 (see manual).
 
|RAM_DDR3_status = N/A
 
|RAM_DDR3_status = N/A
|RAM_dualchannel_status = Untested
+
|RAM_dualchannel_status = OK
 +
|RAM_dualchannel_comments = Seems to work. Tested: Two 512MB DIMMs (in the DIMM_A2 and DIMM_B2 slots).
 
|RAM_ecc_status = Untested
 
|RAM_ecc_status = Untested
  
Line 30: Line 31:
 
|IDE_comments = Tested: Booting from IDE disk (CF card actually).
 
|IDE_comments = Tested: Booting from IDE disk (CF card actually).
 
|IDE_25_status = N/A
 
|IDE_25_status = N/A
|SATA_status = Untested
+
|SATA_status = OK
|SATA_comments =  
+
|SATA_comments = Tested: Booting from a SATA disk in ports SATA1-SATA6 (all of them work).
 
|USB_status = OK
 
|USB_status = OK
 
|USB_comments = Tested: USB keyboard on all 10 USB ports.
 
|USB_comments = Tested: USB keyboard on all 10 USB ports.
Line 49: Line 50:
 
|PCIX_cards_status = N/A
 
|PCIX_cards_status = N/A
 
|AGP_cards_status = N/A
 
|AGP_cards_status = N/A
|PCI_cards_status = WIP
+
|PCI_cards_status = OK
|PCI_cards_comments = The outermost PCI slot doesn't work yet, the other two work fine. Tested: PCI graphics card.
+
|PCI_cards_comments = Tested: PCI graphics card in all three PCI slots.
|PCIE_x1_status = Untested
+
|PCIE_x1_status = OK
|PCIE_x1_comments =  
+
|PCIE_x1_comments = Tested: PCI-E x1 NIC in both PCI-E x1 slots.
 
|PCIE_x2_status = N/A
 
|PCIE_x2_status = N/A
|PCIE_x4_status = Untested
+
|PCIE_x4_status = OK
 +
|PCIE_x4_comments = Tested: PCI-E x1 NIC (which also fits in the x4 slot).
 
|PCIE_x8_status = N/A
 
|PCIE_x8_status = N/A
|PCIE_x16_status = Untested
+
|PCIE_x16_status = OK
|PCIE_x16_comments =  
+
|PCIE_x16_comments = Tested: PCI-E x16 graphics card.
 
|PCIE_x32_status = N/A
 
|PCIE_x32_status = N/A
 
|HTX_status = N/A
 
|HTX_status = N/A
  
|Floppy_status = Untested
+
|Floppy_status = WIP
|Floppy_comments =  
+
|Floppy_comments = Doesn't seem to work, yet.
 
|COM1_status = OK
 
|COM1_status = OK
 
|COM2_status = N/A
 
|COM2_status = N/A
Line 68: Line 70:
 
|PP_comments = Tested: '''modprobe ppdev'''.
 
|PP_comments = Tested: '''modprobe ppdev'''.
 
|PS2_keyboard_status = OK
 
|PS2_keyboard_status = OK
|PS2_mouse_status = Untested
+
|PS2_mouse_status = OK
 
|Game_port_status = N/A
 
|Game_port_status = N/A
 
|IR_status = N/A
 
|IR_status = N/A
Line 76: Line 78:
 
|Sensors_status = OK
 
|Sensors_status = OK
 
|Sensors_comments = The '''k8temp''', '''it87''', '''lm85''', '''eeprom''' and '''i2c-nforce2''' / '''i2c-dev''' modules load fine and seem to work.
 
|Sensors_comments = The '''k8temp''', '''it87''', '''lm85''', '''eeprom''' and '''i2c-nforce2''' / '''i2c-dev''' modules load fine and seem to work.
|Watchdog_status = Untested
+
|Watchdog_status = N/A
|Watchdog_comments =
+
 
|SMBus_status = N/A
 
|SMBus_status = N/A
 
|CAN_bus_status = N/A
 
|CAN_bus_status = N/A
Line 90: Line 91:
 
|LEDs_status = OK
 
|LEDs_status = OK
 
|LEDs_comments = There's a power-on LED on the board PCB, it lights up when the board is powered up.
 
|LEDs_comments = There's a power-on LED on the board PCB, it lights up when the board is powered up.
|HPET_status = Untested
+
|HPET_status = WIP
|HPET_comments =  
+
|HPET_comments = Currently not enabled in coreboot, but you can enable it via the '''hpet=force''' Linux kernel cmdline argument. The '''powertop''' tool works fine.
 
|RNG_status = N/A
 
|RNG_status = N/A
 
|WakeOnModem_status = Untested
 
|WakeOnModem_status = Untested

Revision as of 12:19, 19 December 2010

This page describes how to use coreboot on the ASUS M2N-E mainboard. It is maintained by Uwe Hermann.

Status

Device/functionality Status Comments
CPU
CPU works OK I'm using: CPU model AMD Sempron(tm) Processor 3000+
L1 cache enabled OK CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
L2 cache enabled OK CPU: L2 Cache: 256K (64 bytes/line)
L3 cache enabled N/A
Multiple CPU support N/A
Multi-core support Untested I don't have a multicore CPU to test with, but it should work.
Hardware virtualization Untested
RAM
EDO N/A
SDRAM N/A
SO-DIMM N/A
DDR N/A
DDR2 OK Tested: One 512 MB DIMM in slot DIMM_A2 (see manual).
DDR3 N/A
Dual channel support OK Seems to work. Tested: Two 512MB DIMMs (in the DIMM_A2 and DIMM_B2 slots).
ECC support Untested
On-board Hardware
On-board IDE 3.5" OK Tested: Booting from IDE disk (CF card actually).
On-board IDE 2.5" N/A
On-board SATA OK Tested: Booting from a SATA disk in ports SATA1-SATA6 (all of them work).
On-board SCSI N/A
On-board USB OK Tested: USB keyboard on all 10 USB ports.
On-board VGA N/A
On-board ethernet OK
On-board audio OK
On-board modem N/A
On-board FireWire N/A
On-board smartcard reader N/A
On-board CompactFlash N/A
On-board PCMCIA N/A
Add-on slots/cards
ISA add-on cards N/A
Audio/Modem-Riser (AMR/CNR) cards N/A
PCI add-on cards OK Tested: PCI graphics card in all three PCI slots.
Mini-PCI add-on cards N/A
PCI-X add-on cards N/A
AGP graphics cards N/A
PCI Express x1 add-on cards OK Tested: PCI-E x1 NIC in both PCI-E x1 slots.
PCI Express x2 add-on cards N/A
PCI Express x4 add-on cards OK Tested: PCI-E x1 NIC (which also fits in the x4 slot).
PCI Express x8 add-on cards N/A
PCI Express x16 add-on cards OK Tested: PCI-E x16 graphics card.
PCI Express x32 add-on cards N/A
HTX add-on cards N/A
Legacy / Super I/O
Floppy WIP Doesn't seem to work, yet.
Serial port 1 (COM1) OK
Serial port 2 (COM2) N/A
Parallel port OK Tested: modprobe ppdev.
PS/2 keyboard OK
PS/2 mouse OK
Game port N/A
Infrared N/A
PC speaker OK
DiskOnChip N/A
Miscellaneous
Sensors / fan control OK The k8temp, it87, lm85, eeprom and i2c-nforce2 / i2c-dev modules load fine and seem to work.
Hardware watchdog N/A
SMBus N/A
CAN bus N/A
CPU frequency scaling WIP Doesn't work, yet.
Other powersaving features N/A
ACPI No There's no ACPI implementation for this board, yet.
Reboot OK
Poweroff No Needs ACPI support.
Suspend Unknown
Nonstandard LEDs OK There's a power-on LED on the board PCB, it lights up when the board is powered up.
High precision event timers (HPET) WIP Currently not enabled in coreboot, but you can enable it via the hpet=force Linux kernel cmdline argument. The powertop tool works fine.
Random number generator (RNG) N/A
Wake on modem ring Untested
Wake on LAN Untested
Wake on keyboard Untested
Wake on mouse Untested
Flashrom WIP Works fine with the proprietary BIOS, the may be issues when booted with coreboot though (investigating).
Public domain I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.