Board:asus/m2n-e

From coreboot
Revision as of 11:18, 5 December 2010 by Uwe (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page describes how to use coreboot on the ASUS M2N-E mainboard. It is maintained by Uwe Hermann.

Status

Device/functionality Status Comments
CPU
CPU works OK I'm using: CPU model AMD Sempron(tm) Processor 3000+
L1 cache enabled OK CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
L2 cache enabled OK CPU: L2 Cache: 256K (64 bytes/line)
L3 cache enabled N/A
Multiple CPU support N/A
Multi-core support Untested I don't have a multicore CPU to test with, but it should work.
Hardware virtualization Untested
RAM
EDO N/A
SDRAM N/A
SO-DIMM N/A
DDR N/A
DDR2 OK Tested: One 512 MB DIMM in slot DIMM_A2 (see manual).
DDR3 N/A
Dual channel support Untested
ECC support Untested
On-board Hardware
On-board IDE 3.5" OK Tested: Booting from IDE disk (CF card actually).
On-board IDE 2.5" N/A
On-board SATA Untested
On-board SCSI N/A
On-board USB OK Tested: USB keyboard on all 10 USB ports.
On-board VGA N/A
On-board ethernet OK
On-board audio OK
On-board modem N/A
On-board FireWire N/A
On-board smartcard reader N/A
On-board CompactFlash N/A
On-board PCMCIA N/A
Add-on slots/cards
ISA add-on cards N/A
Audio/Modem-Riser (AMR/CNR) cards N/A
PCI add-on cards WIP The outermost PCI slot doesn't work yet, the other two work fine. Tested: PCI graphics card.
Mini-PCI add-on cards N/A
PCI-X add-on cards N/A
AGP graphics cards N/A
PCI Express x1 add-on cards Untested
PCI Express x2 add-on cards N/A
PCI Express x4 add-on cards Untested
PCI Express x8 add-on cards N/A
PCI Express x16 add-on cards Untested
PCI Express x32 add-on cards N/A
HTX add-on cards N/A
Legacy / Super I/O
Floppy Untested
Serial port 1 (COM1) OK
Serial port 2 (COM2) N/A
Parallel port OK Tested: modprobe ppdev.
PS/2 keyboard OK
PS/2 mouse Untested
Game port N/A
Infrared N/A
PC speaker OK
DiskOnChip N/A
Miscellaneous
Sensors / fan control OK The k8temp, it87, lm85, eeprom and i2c-nforce2 / i2c-dev modules load fine and seem to work.
Hardware watchdog Untested
SMBus N/A
CAN bus N/A
CPU frequency scaling WIP Doesn't work, yet.
Other powersaving features N/A
ACPI No There's no ACPI implementation for this board, yet.
Reboot OK
Poweroff No Needs ACPI support.
Suspend Unknown
Nonstandard LEDs OK There's a power-on LED on the board PCB, it lights up when the board is powered up.
High precision event timers (HPET) Untested
Random number generator (RNG) N/A
Wake on modem ring Untested
Wake on LAN Untested
Wake on keyboard Untested
Wake on mouse Untested
Flashrom WIP Works fine with the proprietary BIOS, the may be issues when booted with coreboot though (investigating).
Public domain I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.