Difference between revisions of "ASUS M2V"

From coreboot
Jump to: navigation, search
(Add M2V page)
 
m
Line 70: Line 70:
 
|SMBus_status = OK
 
|SMBus_status = OK
 
|CAN_bus_status = N/A
 
|CAN_bus_status = N/A
−
|CPUfreq_status = N/A
+
|CPUfreq_status = OK
 
|Powersave_status = N/A
 
|Powersave_status = N/A
 +
|Powersave_comments = S3 etc. not implemented
 
|ACPI_status = OK
 
|ACPI_status = OK
 
|ACPI_comments = Button events untested
 
|ACPI_comments = Button events untested
Line 78: Line 79:
 
|Poweroff_status = OK
 
|Poweroff_status = OK
 
|Poweroff_comments = ACPI power off works
 
|Poweroff_comments = ACPI power off works
−
|LEDs_status = Unkown
+
|LEDs_status = Unknown
 
|LEDs_comments =  
 
|LEDs_comments =  
 
|HPET_status = OK
 
|HPET_status = OK
Line 84: Line 85:
 
|WakeOnModem_status = N/A
 
|WakeOnModem_status = N/A
 
|WakeOnLAN_status = Untested
 
|WakeOnLAN_status = Untested
−
|WakeOnKeyboard_status = N/A
+
|WakeOnKeyboard_status = Untested
−
|WakeOnMouse_status = N/A
+
|WakeOnMouse_status = Untested
 
|Flashrom_status = OK
 
|Flashrom_status = OK
 
|Flashrom_comments = Works fine out of the box with the vendor BIOS as well as with coreboot.
 
|Flashrom_comments = Works fine out of the box with the vendor BIOS as well as with coreboot.

Revision as of 13:24, 11 November 2010

This page describes how to use coreboot on the ASUS M2V mainboard. It is maintained by Tobias Diedrich.

Status

Device/functionality Status Comments
CPU
CPU works OK
L1 cache enabled OK
L2 cache enabled OK
L3 cache enabled N/A
Multiple CPU support N/A
Multi-core support OK Untested, up to two cores should work
Hardware virtualization Untested
RAM
EDO N/A
SDRAM N/A
SO-DIMM N/A
DDR N/A
DDR2 OK
DDR3 N/A
Dual channel support Untested
ECC support Untested The manual says the board supports ECC in theory.
On-board Hardware
On-board IDE 3.5" OK USE 80 WIRE CABLES OR ALTER CONFIGURATION!
On-board IDE 2.5" N/A
On-board SATA OK
On-board SCSI N/A
On-board USB OK Tested: USB thumb drive, USB cdrom, USB mouse
On-board VGA N/A
On-board ethernet OK
On-board audio OK
On-board modem N/A
On-board FireWire N/A
On-board smartcard reader N/A
On-board CompactFlash N/A
On-board PCMCIA N/A
Add-on slots/cards
ISA add-on cards N/A
Audio/Modem-Riser (AMR/CNR) cards N/A
PCI add-on cards OK
Mini-PCI add-on cards Unknown
PCI-X add-on cards N/A
AGP graphics cards N/A
PCI Express x1 add-on cards OK
PCI Express x2 add-on cards N/A
PCI Express x4 add-on cards N/A
PCI Express x8 add-on cards N/A
PCI Express x16 add-on cards OK
PCI Express x32 add-on cards N/A
HTX add-on cards N/A
Legacy / Super I/O
Floppy Untested
Serial port 1 (COM1) OK
Serial port 2 (COM2) N/A
Parallel port Untested
PS/2 keyboard OK
PS/2 mouse Untested
Game port N/A
Infrared N/A
PC speaker Untested
DiskOnChip N/A
Miscellaneous
Sensors / fan control Untested
Hardware watchdog N/A
SMBus OK
CAN bus N/A
CPU frequency scaling OK
Other powersaving features N/A S3 etc. not implemented
ACPI OK Button events untested
Reboot WIP Reboot hangs sometimes
Poweroff OK ACPI power off works
Suspend Unknown
Nonstandard LEDs Unknown
High precision event timers (HPET) OK
Random number generator (RNG) N/A
Wake on modem ring N/A
Wake on LAN Untested
Wake on keyboard Untested
Wake on mouse Untested
Flashrom OK Works fine out of the box with the vendor BIOS as well as with coreboot.

Build tutorial

See the Build HOWTO for information on how to build coreboot for this board.

Public domain I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

Retrieved from "http://www.coreboot.org/index.php?title=ASUS_M2V&oldid=10152"
Personal tools
Namespaces

Variants
Actions
Status
Support
Development / QA
Toolbox