ASUS P2B-D - Revision history

Stepan: /* Build tutorial */

2010-05-05T08:17:10Z

‎Build tutorial

Stepan: /* Build tutorial */

2009-10-30T18:19:01Z

‎Build tutorial

Uwe at 17:06, 18 April 2009

2009-04-18T17:06:43Z

Uwe: Start ASUS P2B-D page.

2009-04-18T17:04:06Z

Start ASUS P2B-D page.

New page

This page describes how to use coreboot on the '''[ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/ ASUS P2B-D]''' mainboard. It is maintained by [[User:Uwe|Uwe Hermann]].

== Status ==

{{Status|

|CPU_status = OK
|CPU_L1_status = OK
|CPU_L1_comments = CPU: L1 I cache: 16K, L1 D cache: 16K
|CPU_L2_status = WIP
|CPU_L2_comments = L2 cache is not being enabled at the moment. We're working on fixing it.
|CPU_L3_status = N/A
|CPU_multiple_status = WIP
|CPU_multiple_comments = Initializing both CPUs ''seems'' to work fine, but Linux has some problems, thus we currently need to use '''maxcpus=0'''.
|CPU_multicore_status = N/A
|CPU_virt_status = N/A

|RAM_EDO_status = N/A
|RAM_SDRAM_status = WIP
|RAM_SDRAM_comments = Works, but currently the RAM settings are hardcoded to one 64MB DIMM and certain speed settings. This will be fixed soon.
|RAM_SODIMM_status = N/A
|RAM_DDR_status = N/A
|RAM_DDR2_status = N/A
|RAM_DDR3_status = N/A
|RAM_dualchannel_status = N/A
|RAM_ecc_status = WIP
|RAM_ecc_comments = Not yet supported by the coreboot 440BX code, but it's on out TODO list.

|IDE_status = OK
|IDE_25_status = N/A
|SATA_status = N/A
|USB_status = Untested
|USB_comments =
|Onboard_VGA_status = N/A
|Onboard_ethernet_status = N/A
|Onboard_audio_status = N/A
|Onboard_modem_status = N/A
|Onboard_firewire_status = N/A
|Smartcard_status = N/A
|Onboard_CF_status = N/A
|Onboard_PCMCIA_status = N/A
|Onboard_SCSI_status = N/A

|ISA_cards_status = Untested
|AMR_cards_status = N/A
|AGP_cards_status = OK
|PCI_cards_status = Untested
|PCIX_cards_status = N/A
|PCI_cards_comments =
|PCIE_x1_status = N/A
|PCIE_x2_status = N/A
|PCIE_x4_status = N/A
|PCIE_x8_status = N/A
|PCIE_x16_status = N/A
|PCIE_x32_status = N/A
|HTX_status = N/A

|Floppy_status = Untested
|COM1_status = OK
|COM2_status = Untested
|PP_status = Untested
|PP_comments =
|PS2_keyboard_status = WIP
|PS2_mouse_status = WIP
|Game_port_status = N/A
|IR_status = Untested
|Speaker_status = OK
|DiskOnChip_status = N/A

|Sensors_status = Untested
|Sensors_comments =
|Watchdog_status = N/A
|SMBus_status = Untested
|CAN_bus_status = N/A
|CPUfreq_status = N/A
|Powersave_status = N/A
|ACPI_status = No
|ACPI_comments = There's no ACPI support for this board.
|Reboot_status = Untested
|Poweroff_status = Untested
|Poweroff_comments =
|LEDs_status = Untested
|LEDs_comments =
|HPET_status = N/A
|RNG_status = N/A
|WakeOnModem_status = Untested
|WakeOnLAN_status = Untested
|WakeOnKeyboard_status = N/A
|WakeOnMouse_status = N/A
|Flashrom_status = OK
|Flashrom_comments = Works fine out of the box with the vendor BIOS as well as with coreboot.

}}

== Build tutorial ==

$ svn co svn://coreboot.org/repos/trunk/coreboot-v2
$ cd coreboot-v2/targets
$ ./buildtarget asus/p2b-d
$ cd asus/p2b-d/p2b-d

Now copy your [[payload]] in the current directory and name it '''payload.elf'''. Then:

$ make -s

The resulting '''coreboot.rom''' is your coreboot ROM image you can flash using [[flashrom]].

{{PD-self}}

@@ Line 95: / Line 95: @@
 == Build tutorial ==
- $ svn co svn://coreboot.org/coreboot/trunk/ coreboot
+See the [[Build HOWTO]] for information on how to build coreboot for this board.
- $ cd coreboot/targets
- $ ./buildtarget asus/p2b-d
- $ cd asus/p2b-d/p2b-d
-−
-Now copy your [[Payloads|payload]] in the current directory and name it '''payload.elf'''. Then:
-−
- $ make -s
-−
-The resulting '''coreboot.rom''' is your coreboot ROM image you can flash using [[flashrom]].
 {{PD-self}}