Difference between revisions of "Board:asus/p3b-f"

From coreboot
Jump to: navigation, search
(Add current P3B-F status (tested with a yet pending patch).)
Line 4: Line 4:
  
 
{{Status|
 
{{Status|
 +
 +
|CPU_status = OK
 +
|CPU_L1_status = OK
 +
|CPU_L1_comments = CPU: L1 I cache: 16K, L1 D cache: 16K
 +
|CPU_L2_status = OK
 +
|CPU_L2_comments = CPU: L2 cache: 256K
 +
|CPU_L3_status = N/A
 +
|CPU_multiple_status = N/A
 +
|CPU_multicore_status = N/A
 +
|CPU_virt_status = N/A
 +
 +
|RAM_EDO_status = N/A
 +
|RAM_SDRAM_status = OK
 +
|RAM_SODIMM_status = N/A
 +
|RAM_DDR_status = N/A
 +
|RAM_DDR2_status = N/A
 +
|RAM_DDR3_status = N/A
 +
|RAM_dualchannel_status = N/A
 +
|RAM_ecc_status = WIP
 +
|RAM_ecc_comments = Not yet supported by the coreboot 440BX code, but it's on our TODO list.
 +
 +
|IDE_status = OK
 +
|IDE_25_status = N/A
 +
|SATA_status = N/A
 +
|USB_status = OK
 +
|USB_comments = Tested: USB keyboard in both USB ports.
 +
|Onboard_VGA_status = N/A
 +
|Onboard_ethernet_status = N/A
 +
|Onboard_audio_status = N/A
 +
|Onboard_modem_status = N/A
 +
|Onboard_firewire_status = N/A
 +
|Smartcard_status = N/A
 +
|Onboard_CF_status = N/A
 +
|Onboard_PCMCIA_status = N/A
 +
|Onboard_SCSI_status = N/A
 +
 +
|ISA_cards_status = N/A
 +
|AMR_cards_status = N/A
 +
|Mini_PCI_cards_status = N/A
 +
|PCIX_cards_status = N/A
 +
|PCI_cards_status = Untested
 +
|AGP_cards_status = OK
 +
|AGP_cards_comments = Tested: AGP graphics card.
 +
|PCIE_cards_status = N/A
 +
|PCIE_x1_status = N/A
 +
|PCIE_x2_status = N/A
 +
|PCIE_x4_status = N/A
 +
|PCIE_x8_status = N/A
 +
|PCIE_x16_status = N/A
 +
|PCIE_x32_status = N/A
 +
|HTX_status = N/A
 +
 +
|Floppy_status = Untested
 +
|COM1_status = OK
 +
|COM2_status = Untested
 +
|PP_status = OK
 +
|PP_comments = Doing '''modprobe ppdev''' works, but no further tests were performed.
 +
|PS2_keyboard_status = No
 +
|PS2_keyboard_comments = This is being investigated.
 +
|PS2_mouse_status = Untested
 +
|Game_port_status = N/A
 +
|IR_status =
 +
|Speaker_status = OK
 +
|DiskOnChip_status = N/A
 +
 +
|Sensors_status = OK
 +
|Sensors_comments = Works fine, you can use the '''w83781d''', '''i2c-piix4''', and '''eeprom''' kernel modules. TODO: Add note about P3B-F specific stuff.
 +
|Watchdog_status = N/A
 +
|CAN_bus_status = N/A
 +
|CPUfreq_status = Untested
 +
|Powersave_status = N/A
 +
|ACPI_status = No
 +
|ACPI_comments = There's no ACPI implementation for this board.
 +
|SMBus_status =
 +
|Reboot_status = Untested
 +
|Poweroff_status = Untested
 +
|LEDs_status = Untested
 +
|LEDs_comments =
 +
|HPET_status = N/A
 +
|RNG_status = N/A
 +
|WakeOnModem_status =
 +
|WakeOnLAN_status =
 +
|WakeOnKeyboard_status =
 +
|WakeOnMouse_status =
 +
|Flashrom_status = WIP
 +
|Flashrom_comments = TODO
  
 
}}
 
}}

Revision as of 16:18, 18 September 2010

This page describes how to use coreboot on the P3B-F mainboard. It is maintained by Uwe Hermann.

Status

Device/functionality Status Comments
CPU
CPU works OK
L1 cache enabled OK CPU: L1 I cache: 16K, L1 D cache: 16K
L2 cache enabled OK CPU: L2 cache: 256K
L3 cache enabled N/A
Multiple CPU support N/A
Multi-core support N/A
Hardware virtualization N/A
RAM
EDO N/A
SDRAM OK
SO-DIMM N/A
DDR N/A
DDR2 N/A
DDR3 N/A
Dual channel support N/A
ECC support WIP Not yet supported by the coreboot 440BX code, but it's on our TODO list.
On-board Hardware
On-board IDE 3.5" OK
On-board IDE 2.5" N/A
On-board SATA N/A
On-board SCSI N/A
On-board USB OK Tested: USB keyboard in both USB ports.
On-board VGA N/A
On-board ethernet N/A
On-board audio N/A
On-board modem N/A
On-board FireWire N/A
On-board smartcard reader N/A
On-board CompactFlash N/A
On-board PCMCIA N/A
Add-on slots/cards
ISA add-on cards N/A
Audio/Modem-Riser (AMR/CNR) cards N/A
PCI add-on cards Untested
Mini-PCI add-on cards N/A
PCI-X add-on cards N/A
AGP graphics cards OK Tested: AGP graphics card.
PCI Express x1 add-on cards N/A
PCI Express x2 add-on cards N/A
PCI Express x4 add-on cards N/A
PCI Express x8 add-on cards N/A
PCI Express x16 add-on cards N/A
PCI Express x32 add-on cards N/A
HTX add-on cards N/A
Legacy / Super I/O
Floppy Untested
Serial port 1 (COM1) OK
Serial port 2 (COM2) Untested
Parallel port OK Doing modprobe ppdev works, but no further tests were performed.
PS/2 keyboard No This is being investigated.
PS/2 mouse Untested
Game port N/A
Infrared
PC speaker OK
DiskOnChip N/A
Miscellaneous
Sensors / fan control OK Works fine, you can use the w83781d, i2c-piix4, and eeprom kernel modules. TODO: Add note about P3B-F specific stuff.
Hardware watchdog N/A
SMBus
CAN bus N/A
CPU frequency scaling Untested
Other powersaving features N/A
ACPI No There's no ACPI implementation for this board.
Reboot Untested
Poweroff Untested
Suspend Unknown
Nonstandard LEDs Untested
High precision event timers (HPET) N/A
Random number generator (RNG) N/A
Wake on modem ring
Wake on LAN
Wake on keyboard
Wake on mouse
Flashrom WIP TODO


Public domain I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.