ASUS P4C800-E Deluxe Build Tutorial/Infos

From coreboot
Revision as of 20:59, 4 October 2008 by Vince (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

/proc/interrupts

          CPU0       CPU1
 0:         44          0   IO-APIC-edge      timer
 1:        541          0   IO-APIC-edge      i8042
 8:          1          0   IO-APIC-edge      rtc0
 9:          0          0   IO-APIC-fasteoi   acpi
14:         32          0   IO-APIC-edge      ata_piix
15:          0          0   IO-APIC-edge      ata_piix
16:          0          0   IO-APIC-fasteoi   uhci_hcd:usb2, uhci_hcd:usb5
18:      20613          0   IO-APIC-fasteoi   uhci_hcd:usb4, eth0
19:          0          0   IO-APIC-fasteoi   uhci_hcd:usb3
20:          3          0   IO-APIC-fasteoi   ohci1394
23:          0          0   IO-APIC-fasteoi   sata_promise, ehci_hcd:usb1

NMI: 0 0 Non-maskable interrupts LOC: 98191 98167 Local timer interrupts RES: 3037 7015 Rescheduling interrupts CAL: 46 67 function call interrupts TLB: 215 1250 TLB shootdowns TRM: 0 0 Thermal event interrupts SPU: 0 0 Spurious interrupts ERR: 0 MIS: 0

getpir

/* This file was generated by getpir.c, do not modify!

* (but if you do, please run checkpir on it to verify)
*
* Contains the IRQ Routing Table dumped directly from your
* memory, which BIOS sets up.
*
* Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx
*/
  1. ifdef GETPIR
  2. include "pirq_routing.h"
  3. else
  4. include <arch/pirq_routing.h>
  5. endif

const struct irq_routing_table intel_irq_routing_table = { PIRQ_SIGNATURE, /* u32 signature */ PIRQ_VERSION, /* u16 version */ 32+16*12, /* There can be total 12 devices on the bus */ 0x00, /* Where the interrupt router lies (bus) */ (0x1f<<3)|0x0, /* Where the interrupt router lies (dev) */ 0, /* IRQs devoted exclusively to PCI usage */ 0x8086, /* Vendor */ 0x24d0, /* Device */ 0, /* Crap (miniport) */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ 0x66, /* u8 checksum. This has to be set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ {0x00,(0x01<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, {0x03,(0x08<<3)|0x0, {{0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, {0x00,(0x1f<<3)|0x0, {{0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, {0x00,(0x1d<<3)|0x0, {{0x60, 0xdcf8}, {0x63, 0xdcf8}, {0x62, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x0, 0x0}, {0x03,(0x09<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x1, 0x0}, {0x03,(0x0a<<3)|0x0, {{0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0x0dcf8}}, 0x2, 0x0}, {0x03,(0x0b<<3)|0x0, {{0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0x0dcf8}}, 0x3, 0x0}, {0x02,(0x01<<3)|0x0, {{0x62, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, {0x03,(0x0c<<3)|0x0, {{0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x4, 0x0}, {0x03,(0x0d<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x5, 0x0}, {0x03,(0x03<<3)|0x0, {{0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, {0x03,(0x04<<3)|0x0, {{0x6b, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, } };

unsigned long write_pirq_routing_table(unsigned long addr) { return copy_pirq_routing_table(addr); }

mptable

/* generated by MPTable, version 2.0.15*/ /* as modified by RGM for coreboot */

  1. include <console/console.h>
  2. include <arch/smp/mpspec.h>
  3. include <device/pci.h>
  4. include <string.h>
  5. include <stdint.h>

void *smp_write_config_table(void *v) {

       static const char sig[4] = "PCMP";
       static const char oem[8] = "LNXI    ";
       static const char productid[12] = "P4DPE       ";
       struct mp_config_table *mc;
       mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
       memset(mc, 0, sizeof(*mc));
       memcpy(mc->mpc_signature, sig, sizeof(sig));
       mc->mpc_length = sizeof(*mc); /* initially just the header */
       mc->mpc_spec = 0x04;
       mc->mpc_checksum = 0; /* not yet computed */
       memcpy(mc->mpc_oem, oem, sizeof(oem));
       memcpy(mc->mpc_productid, productid, sizeof(productid));
       mc->mpc_oemptr = 0;
       mc->mpc_oemsize = 0;
       mc->mpc_entry_count = 0; /* No entries yet... */
       mc->mpc_lapic = LAPIC_ADDR;
       mc->mpe_length = 0;
       mc->mpe_checksum = 0;
       mc->reserved = 0;
       smp_write_processors(mc);


/*Bus: Bus ID Type*/ smp_write_bus(mc, 0, "PCI "); smp_write_bus(mc, 1, "PCI "); smp_write_bus(mc, 2, "PCI "); smp_write_bus(mc, 3, "PCI "); smp_write_bus(mc, 4, "ISA "); /*I/O APICs: APIC ID Version State Address*/ smp_write_ioapic(mc, 2, 0x20, 0xfec00000); { device_t dev; struct resource *res; dev = dev_find_slot(1, PCI_DEVFN(0x1e,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, 3, 0x20, res->base); } } dev = dev_find_slot(1, PCI_DEVFN(0x1c,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, 4, 0x20, res->base); } }

               dev = dev_find_slot(4, PCI_DEVFN(0x1e,0));
               if (dev) {

res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, 5, 0x20, res->base); }

               }
               dev = dev_find_slot(4, PCI_DEVFN(0x1c,0));
               if (dev) {

res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, 8, 0x20, res->base); }

               }

} /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#

  • / smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x4, 0x0, 0x2, 0x0);

smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x4, 0x1, 0x2, 0x1); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x4, 0x0, 0x2, 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x4, 0x3, 0x2, 0x3); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x4, 0x4, 0x2, 0x4); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x4, 0x6, 0x2, 0x6); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x4, 0x7, 0x2, 0x7); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x4, 0x8, 0x2, 0x8); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x4, 0x9, 0x2, 0x9); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x4, 0xc, 0x2, 0xc); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x4, 0xd, 0x2, 0xd); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x4, 0xe, 0x2, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x4, 0xf, 0x2, 0xf); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, 0x2, 0x10); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7c, 0x2, 0x12); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7d, 0x2, 0x11); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, 0x2, 0x10); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, 0x2, 0x13); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x76, 0x2, 0x12); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, 0x2, 0x17); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x4, 0x2, 0x12); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, 0xc, 0x2, 0x14); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, 0x10, 0x2, 0x17); /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x0, 0x0, MP_APIC_ALL, 0x0); smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x0, 0x0, MP_APIC_ALL, 0x1); MP Config Extended Table Entries:

-- System Address Space

bus ID: 0 address type: I/O address
address base: 0xb000
address range: 0x4000

-- System Address Space

bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x100

-- System Address Space

bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000

-- System Address Space

bus ID: 0 address type: memory address
address base: 0xfe800000
address range: 0x400000

-- System Address Space

bus ID: 0 address type: prefetch address
address base: 0xd7f00000
address range: 0x20100000

-- Bus Heirarchy

bus ID: 4 bus info: 0x01 parent bus ID: 0--

Compatibility Bus Address

bus ID: 0 address modifier: add
predefined range: 0x00000000--

Compatibility Bus Address

bus ID: 0 address modifier: add
predefined range: 0x00000001	/* There is no extension information... */

/* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); }

unsigned long write_smp_table(unsigned long addr) { void *v; v = smp_write_floating_table(addr); return (unsigned long)smp_write_config_table(v); }

superiotool -dV

superiotool r Probing for ALi Super I/O at 0x3f0...

 Failed. Returned data: id=0xffff, rev=0xff

Probing for ALi Super I/O at 0x370...

 Failed. Returned data: id=0xffff, rev=0xff

Probing for Fintek Super I/O at 0x2e...

 Failed. Returned data: vid=0x42fe, id=0x8282

Probing for Fintek Super I/O at 0x4e...

 Failed. Returned data: vid=0xffff, id=0xffff

Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x2e...

 Failed. Returned data: id=0xffff, rev=0xf

Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...

 Failed. Returned data: id=0x8282, rev=0xf

Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x4e...

 Failed. Returned data: id=0xffff, rev=0xf

Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...

 Failed. Returned data: id=0xffff, rev=0xf

Probing for NSC Super I/O at 0x2e...

 Failed. Returned data: port=0xff, port+1=0xff

Probing for NSC Super I/O at 0x4e...

 Failed. Returned data: port=0xff, port+1=0xff

Probing for NSC Super I/O at 0x15c...

 Failed. Returned data: port=0xff, port+1=0xff

Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...

 Failed. Returned data: id=0xff, rev=0xff

Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...

 Failed. Returned data: id=0xff, rev=0xff

Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...

 Failed. Returned data: id=0xff, rev=0xff

Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...

 Failed. Returned data: id=0xff, rev=0xff

Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...

 Failed. Returned data: id=0xff, rev=0xff

Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...

 Failed. Returned data: id=0xff, rev=0xff

Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...

 Failed. Returned data: id=0xff, rev=0xff

Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...

 Failed. Returned data: id=0xff, rev=0xff

Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...

 Failed. Returned data: id=0xff, rev=0xff

Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...

 Failed. Returned data: id=0xff, rev=0xff

Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...

 Failed. Returned data: id=0xff, rev=0xff

Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...

 Failed. Returned data: id=0xff, rev=0xff

Probing for Winbond Super I/O (init=0x88) at 0x2e...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x89) at 0x2e...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond W83627THF/THG (id=0x82, rev=0x82) at 0x2e Register dump: idx 20 21 22 23 24 25 26 28 29 2a 2b 2c 2d 2e 2f val 82 82 ff fe 42 00 00 00 00 00 10 00 00 00 ff def 82 NA ff 00 MM 00 MM 00 00 00 MM MM MM 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 00 03 f0 06 02 0e 00 ff 00 00 def 01 03 f0 06 02 0e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 01 03 78 07 03 3a def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 01 03 f8 04 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 01 02 f8 03 00 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 42 def 01 00 60 00 64 01 0c 80 LDN 0x07 (GPIO 1, GPIO 5, game port, MIDI port) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 val 08 02 01 03 30 00 ff ff ff ff cd 00 def 00 02 01 03 30 09 ff 00 00 ff 00 00 LDN 0x08 (GPIO 2) idx 30 f0 f1 f2 f3 f4 f5 f6 f7 val 00 ff ff ff 00 ff 00 00 00 def 00 ff 00 00 00 RR 00 00 00 LDN 0x09 (GPIO 3, GPIO 4) idx 30 f0 f1 f2 f3 f4 f5 f6 val 03 ef 5f 00 00 df 01 00 def 00 ff 00 00 00 ff 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 f0 f1 f3 f4 f6 f7 f9 fe ff val 00 00 00 00 ff 26 00 00 00 00 00 8f 30 00 00 00 00 00 00 def 00 00 00 00 MM MM 00 00 00 00 00 00 00 00 00 00 00 RR RR LDN 0x0b (Hardware monitor) idx 30 60 61 70 val 01 02 90 00 def 00 00 00 00 Probing for Winbond Super I/O (init=0x88) at 0x4e...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x89) at 0x4e...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x88) at 0x3f0...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x89) at 0x3f0...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x88) at 0x370...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x89) at 0x370...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x88) at 0x250...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x89) at 0x250...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...

 Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

flashrom -V

Calibrating delay loop... 784M loops per second, 100 myus = 220 us. OK. No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 OK. Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT25DF321, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for AMIC A25L40P, 512 KB: 4b ID not supported on this SPI controller Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L4005, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L8005, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L1605, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX29F002, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB) at physical address 0xfff80000. Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P16, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P32, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P64, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P128, 16384 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M29F002B, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29W040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W25x10, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W25x20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W25x40, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W25x80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29EE011, 128 KB:

=

 Probing disabled for Winbond W29EE011 because the probing sequence puts the
 AMIC A49LF040A in a funky state.
 Use 'flashrom -c W29EE011' if you have a board with this chip.

=

Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x9d, id2 0x6e Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0xff, did 0xff Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0x9d, did 0x6e Probing for EON unknown EON SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix unknown Macronix SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC unknown PMC SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST unknown SST SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST unknown ST SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected No operations were specified.

lspci -tnvv

-[0000:00]-+-00.0 8086:2578

          +-01.0-[0000:01]--+-00.0  1002:4e45
          |                 \-00.1  1002:4e65
          +-03.0-[0000:02]----01.0  8086:1019
          +-1d.0  8086:24d2
          +-1d.1  8086:24d4
          +-1d.2  8086:24d7
          +-1d.3  8086:24de
          +-1d.7  8086:24dd
          +-1e.0-[0000:03]--+-03.0  1106:3044
          |                 \-04.0  105a:3373
          +-1f.0  8086:24d0
          +-1f.1  8086:24db
          +-1f.3  8086:24d3
          \-1f.5  8086:24d5

lspci -vvvxx

00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub (rev 02) Subsystem: ASUSTeK Computer Inc. Unknown device 80f6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [e4] Vendor Specific Information Capabilities: [a0] AGP version 3.0 Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP- GART64- 64bit- FW- Rate=<none> 00: 86 80 78 25 06 00 90 20 02 00 00 06 00 00 00 00 10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 f6 80 30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: Intel Corporation 82875P Processor to AGP Controller (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fe800000-fe8fffff Prefetchable memory behind bridge: d7f00000-f7efffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- 00: 86 80 79 25 07 01 a0 00 02 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 40 b0 b0 a0 02 20: 80 fe 80 fe f0 d7 e0 f7 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00

00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI to CSA Bridge (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00: 86 80 7b 25 07 01 a0 00 02 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 c0 c0 a0 02 20: 90 fe 90 fe f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00

00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at eec0 [size=32] 00: 86 80 d2 24 05 00 80 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: c1 ee 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00

00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at ef00 [size=32] 00: 86 80 d4 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00

00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ef40 [size=32] 00: 86 80 d7 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00

00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ef80 [size=32] 00: 86 80 de 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00

00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at febfbc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port 00: 86 80 dd 24 06 01 90 02 02 20 03 0c 00 00 00 00 10: 00 bc bf fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 00

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00: 86 80 4e 24 07 01 80 00 c2 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 03 40 d0 d0 80 02 20: a0 fe a0 fe f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00

00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00: 86 80 d0 24 0f 00 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fc00 [size=16] Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K] 00: 86 80 db 24 07 00 88 02 02 8a 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 fc 00 00 00 00 00 50 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00

00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 0400 [size=32] 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00

00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at e800 [size=256] Region 1: I/O ports at ee80 [size=64] Region 2: Memory at febffc00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at febff800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 86 80 d5 24 07 00 90 02 02 00 01 04 00 00 00 00 10: 01 e8 00 00 81 ee 00 00 00 fc bf fe 00 f8 bf fe 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 f3 80 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 02 00 00

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro] (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at b000 [size=256] Region 2: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fe8c0000 [disabled] [size=128K] Capabilities: [58] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 45 4e 87 01 b0 02 00 00 00 03 04 40 80 00 10: 08 00 00 e8 01 b0 00 00 00 00 8f fe 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 02 00 30: 00 00 8c fe 58 00 00 00 00 00 00 00 0a 01 08 00

01:00.1 Display controller: ATI Technologies Inc Radeon R300 [Radeon 9500 Pro] (Secondary) Subsystem: ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), Cache Line Size: 16 bytes Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at fe8e0000 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 65 4e 87 00 b0 02 00 00 80 03 04 40 00 00 10: 08 00 00 e0 00 00 8e fe 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 03 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00

02:01.0 Ethernet controller: Intel Corporation 82547EI Gigabit Ethernet Controller (LOM) Subsystem: ASUSTeK Computer Inc. Unknown device 80f7 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (63750ns min), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at cf80 [size=32] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- 00: 86 80 19 10 07 00 38 02 00 00 00 02 04 00 00 00 10: 00 00 9e fe 00 00 00 00 81 cf 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 f7 80 30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 ff 00

03:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. A8V Deluxe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at dc00 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 44 30 17 01 10 02 80 10 00 0c 04 40 00 00 10: 00 f8 af fe 01 dc 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 8a 80 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 20

03:04.0 RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) (rev 02) Subsystem: ASUSTeK Computer Inc. K8V Deluxe/PC-DL Deluxe motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 96 (1000ns min, 4500ns max), Cache Line Size: 576 bytes Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at df00 [size=64] Region 1: I/O ports at dfa0 [size=16] Region 2: I/O ports at d880 [size=128] Region 3: Memory at feafe000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at feac0000 (32-bit, non-prefetchable) [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 5a 10 73 33 17 01 30 02 02 00 04 01 90 60 00 00 10: 01 df 00 00 a1 df 00 00 81 d8 00 00 00 e0 af fe 20: 00 00 ac fe 00 00 00 00 00 00 00 00 43 10 f5 80 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 04 12

setpci

  • setpci -s 0:0:1.0 7c.L
0ab0c500
  • setpci -s 0:0:1.0 80.L
ab00ac09
  • setpci -s 0:0:1.0 84.L
0000030b

dmidecode

  1. dmidecode 2.8

SMBIOS 2.3 present. 60 structures occupying 1920 bytes. Table at 0x000F04B0.

Handle 0x0000, DMI type 0, 20 bytes BIOS Information Vendor: American Megatrends Inc. Version: 1023.001 Release Date: 06/20/2005 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported

Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: To Be Filled By O.E.M. Product Name: To Be Filled By O.E.M. Version: To Be Filled By O.E.M. Serial Number: To Be Filled By O.E.M. UUID: 00020003-0004-0005-0006-000700080009 Wake-up Type: PCI PME#

Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: ASUSTeK Computer Inc. Product Name: P4C800-E Version: Rev 1.xx Serial Number: MB-1234567890

Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: Chassis Manufacture Type: Desktop Lock: Not Present Version: Chassis Version Serial Number: Chassis Serial Number Asset Tag: Asset-1234567890 Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000001

Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: CPU 1 Type: Central Processor Family: Pentium 4 Manufacturer: Intel ID: 29 0F 00 00 FF FB EB BF Signature: Type 0, Family 15, Model 2, Stepping 9 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Pentium(R) 4 CPU 2.80GHz Voltage: 3.3 V 2.9 V External Clock: 200 MHz Max Speed: 3600 MHz Current Speed: 2800 MHz Status: Populated, Enabled Upgrade: Socket 478 L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: 0x0007 Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M.

Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: L1-Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Varies With Memory Address Location: Internal Installed Size: 8 KB Maximum Size: 8 KB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 4-way Set-associative

Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2-Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Varies With Memory Address Location: Internal Installed Size: 512 KB Maximum Size: 512 KB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 4-way Set-associative

Handle 0x0007, DMI type 7, 19 bytes Cache Information Socket Designation: L3-Cache Configuration: Disabled, Not Socketed, Level 3 Operational Mode: Unknown Location: Internal Installed Size: 0 KB Maximum Size: 0 KB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown

Handle 0x0008, DMI type 5, 24 bytes Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 1024 MB Maximum Total Memory Size: 4096 MB Supported Speeds: 70 ns 60 ns 50 ns Supported Memory Types: SIMM DIMM SDRAM Memory Module Voltage: 2.9 V Associated Memory Slots: 4 0x0009 0x000A 0x000B 0x000C Enabled Error Correcting Capabilities: None

Handle 0x0009, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM A1 Bank Connections: 1 0 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 512 MB (Double-bank Connection) Enabled Size: 512 MB (Double-bank Connection) Error Status: OK

Handle 0x000A, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM A2 Bank Connections: 3 2 Current Speed: Unknown Type: Unknown Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK

Handle 0x000B, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM B1 Bank Connections: 5 4 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 512 MB (Double-bank Connection) Enabled Size: 512 MB (Double-bank Connection) Error Status: OK

Handle 0x000C, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM B2 Bank Connections: 7 6 Current Speed: Unknown Type: Unknown Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK

Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: PS2Mouse External Connector Type: PS/2 Port Type: Mouse Port

Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: PS/2 Port Type: Keyboard Port

Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Access Bus (USB) Port Type: USB

Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Access Bus (USB) Port Type: USB

Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB3 External Connector Type: Access Bus (USB) Port Type: USB

Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB4 External Connector Type: Access Bus (USB) Port Type: USB

Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB5 External Connector Type: Access Bus (USB) Port Type: USB

Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB6 External Connector Type: Access Bus (USB) Port Type: USB

Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB7 External Connector Type: Access Bus (USB) Port Type: USB

Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB8 External Connector Type: Access Bus (USB) Port Type: USB

Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: LPT 1 External Connector Type: DB-25 male Port Type: Parallel Port ECP/EPP

Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: COM 1 External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible

Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: COM 2 External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible

Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Audio Mic In External Connector Type: Mini Jack (headphones) Port Type: Audio Port

Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Audio Line In External Connector Type: Mini Jack (headphones) Port Type: Audio Port

Handle 0x001C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Audio Line Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port

Handle 0x001D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: LAN External Connector Type: RJ-45 Port Type: Network Port

Handle 0x001E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: AUX Internal Connector Type: On Board Sound Input From CD-ROM External Reference Designator: Not Specified External Connector Type: None Port Type: Audio Port

Handle 0x001F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CD Internal Connector Type: On Board Sound Input From CD-ROM External Reference Designator: Not Specified External Connector Type: None Port Type: Audio Port

Handle 0x0020, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PRI_IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other

Handle 0x0021, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SEC_IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other

Handle 0x0022, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FLOPPY Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: Other

Handle 0x0023, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CHA_FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other

Handle 0x0024, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: CPU_FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other

Handle 0x0025, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PWR_FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other

Handle 0x0026, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: ATXPWR Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other

Handle 0x0027, DMI type 9, 13 bytes System Slot Information Designation: AGP Type: 32-bit AGP 8x Current Usage: In Use Length: Short Characteristics: 3.3 V is provided

Handle 0x0028, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Short ID: 1 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported

Handle 0x0029, DMI type 9, 13 bytes System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Available Length: Short ID: 2 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported

Handle 0x002A, DMI type 9, 13 bytes System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: Available Length: Short ID: 3 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported

Handle 0x002B, DMI type 9, 13 bytes System Slot Information Designation: PCI4 Type: 32-bit PCI Current Usage: Available Length: Short ID: 4 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported

Handle 0x002C, DMI type 9, 13 bytes System Slot Information Designation: PCI5 Type: 32-bit PCI Current Usage: Available Length: Short ID: 5 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported

Handle 0x002D, DMI type 10, 6 bytes On Board Device Information Type: Ethernet Status: Enabled Description: Intel CSA 82547EI

Handle 0x002E, DMI type 11, 5 bytes OEM Strings String 1: To Be Filled By O.E.M. String 2: To Be Filled By O.E.M. String 3: To Be Filled By O.E.M. String 4: To Be Filled By O.E.M.

Handle 0x002F, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1

Handle 0x0030, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Single-bit ECC Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 4

Handle 0x0031, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x100000003FF Range Size: 1073741825 kB Physical Array Handle: 0x0030 Partition Width: 0

Handle 0x0032, DMI type 17, 27 bytes Memory Device Array Handle: 0x0030 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 512 MB Form Factor: DIMM Set: None Locator: DIMM0 Bank Locator: BANK0 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer0 Serial Number: SerNum0 Asset Tag: AssetTagNum0 Part Number: PartNum0

Handle 0x0033, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Device Handle: 0x0032 Memory Array Mapped Address Handle: 0x0031 Partition Row Position: 1

Handle 0x0034, DMI type 17, 27 bytes Memory Device Array Handle: 0x0030 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: BANK1 Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: Manufacturer1 Serial Number: SerNum1 Asset Tag: AssetTagNum1 Part Number: PartNum1

Handle 0x0035, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x0034 Memory Array Mapped Address Handle: 0x0031 Partition Row Position: 1

Handle 0x0036, DMI type 17, 27 bytes Memory Device Array Handle: 0x0030 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 512 MB Form Factor: DIMM Set: None Locator: DIMM2 Bank Locator: BANK2 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer2 Serial Number: SerNum2 Asset Tag: AssetTagNum2 Part Number: PartNum2

Handle 0x0037, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00020000000 Ending Address: 0x0003FFFFFFF Range Size: 512 MB Physical Device Handle: 0x0036 Memory Array Mapped Address Handle: 0x0031 Partition Row Position: 1

Handle 0x0038, DMI type 17, 27 bytes Memory Device Array Handle: 0x0030 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM3 Bank Locator: BANK3 Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: Manufacturer3 Serial Number: SerNum3 Asset Tag: AssetTagNum3 Part Number: PartNum3

Handle 0x0039, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x0038 Memory Array Mapped Address Handle: 0x0031 Partition Row Position: 1

Handle 0x003A, DMI type 32, 20 bytes System Boot Information Status: No errors detected

Handle 0x003B, DMI type 127, 4 bytes End Of Table