From coreboot
Revision as of 15:59, 23 April 2009 by Uwe (Talk | contribs)

Jump to: navigation, search

abuild is a great tool to check whether your coreboot (v2) tree compiles for one or all targets.

If you invoke abuild with no parameters, it will build all boards automatically. The resulting images and logs will end up in the coreboot-builds/ subdirectory of the current directory.

To build the thomson ip1000 target, run

cd util/abuild; abuild -t thomson/ip1000

The build log will be in util/abuild/coreboot-builds/thomson_ip1000/make.log.

As an alternative, you can build in the top level directory.

util/abuild/abuild -t thomson/ip1000 $PWD

You can also specify a payload directory with -p:

mkdir payloads
cp /somewhere/filo.elf payloads

Then add a file payloads/payload.sh which prints the name of the payload to use (and takes the mainboard as a parameter) such as

echo "`dirname $0`/build/filo.elf"

Then you can build a fully working image with payload by specifying:

util/abuild/abuild -t thomson/ip1000 -p ./payloads $PWD

Specify -c max or -c 2 if you have an SMP system, to speed up compilation.