Board:advantech/pcm-5820: Difference between revisions

From coreboot
Jump to navigation Jump to search
No edit summary
(Inline the patch for now, but this should really be a link to the patch file or a mailing list post containing the patch.)
Line 271: Line 271:


== Required patches ==
== Required patches ==
[[Media:01-add-disabling-internal-registers.patch|01-add-disabling-internal-registers.patch]
 
<pre>
--- linux-2.6.22.orig/arch/i386/kernel/cpu/cyrix.c
+++ linux-2.6.22/arch/i386/kernel/cpu/cyrix.c
@@ -178,6 +178,21 @@ static void __cpuinit set_cx86_inc(void)
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
}
+#ifdef CONFIG_DISABLE_INTERNAL_REGISTERS
+static void __cpuinit disable_internal_chipset(void)
+{
+ printk(KERN_INFO "Disable integrated function access.\n");
+ /*
+ * this disables the integrated function memory area
+ *  - disables the scratch pad - full cache is available
+ *  - disables access to any internal chipset registers
+ */
+ setCx86(CX86_GCR,0x00);
+}
+#else
+# define disable_internal_chipset()
+#endif
+
/*
  * Configure later MediaGX and/or Geode processor.
  */
@@ -197,6 +212,7 @@ static void __cpuinit geode_configure(vo
/* FPU fast, DTE cache, Mem bypass */
setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
+ disable_internal_chipset();
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
set_cx86_memwb();
</pre>


{{Cc-by-2.5}}
{{Cc-by-2.5}}

Revision as of 23:45, 30 October 2007

The Advantech PCM-5820 features a Cyrix GX1 processor, 2 IDE controllers (one is a CompactFlash reader), a USB port and a PC/104 extension bus.

Complete specs/docs can be found on Advantech website.

Status

Device/functionality Status Comments
CPU
CPU works OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK
L1 cache enabled OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
L2 cache enabled OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
L3 cache enabled OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Multiple CPU support OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Multi-core support OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Hardware virtualization OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
RAM
EDO OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
SDRAM OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
SO-DIMM OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown My 256M 100Mhz memory module is working fine.
DDR OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
DDR2 OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
DDR3 OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Dual channel support OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
ECC support OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board Hardware
On-board IDE 3.5" OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Untested
On-board IDE 2.5" OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board SATA OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board SCSI OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
On-board USB OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Tested with an Hauppauge WinTv-USB device.
On-board VGA OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK VGA support in LinuxBIOS works fine (e.g. for displaying a boot logo), for console/X11 you need a special kernel console and Xorg driver.
On-board Ethernet OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK
On-board Audio OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Untested
On-board Modem OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board FireWire OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board Smartcard reader OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board CompactFlash OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
On-board PCMCIA OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
On-board Wifi OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board Bluetooth OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board SD card reader OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Add-on slots/cards
ISA add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Audio/Modem-Riser (AMR/CNR) cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
PCI add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Mini-PCI add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Mini-PCI-Express add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
PCI-X add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
AGP graphics cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x1 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x2 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x4 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x8 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x16 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x32 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
HTX add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Legacy / Super I/O
Floppy OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Untested
Serial port 1 (COM1) OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK
Serial port 2 (COM2) OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Untested
Parallel port OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Untested
PS/2 keyboard OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK
PS/2 mouse OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Untested
Game port OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Infrared OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Untested I don't own the module that should be plugged on COM2.
PC speaker OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK
DiskOnChip OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Input
Trackpoint OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Touchpad OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Fn Hotkeys OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Fingerprint Reader OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Laptop
Docking VGA OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Docking LAN OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Docking USB OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Docking Audio OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Docking Displayport OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Thinklight OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Webcam OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Miscellaneous
Sensors / fan control OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Untested This CPU does not need a fan.
Hardware watchdog OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
SMBus OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
CAN bus OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Tested with an AIM104-CAN card.
CPU frequency scaling OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Untested
Other powersaving features OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Untested
ACPI OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Untested
Reboot OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK
Poweroff OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Untested
Suspend OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Nonstandard LEDs OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
High precision event timers (HPET) OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Random number generator (RNG) OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Wake on modem ring OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Wake on LAN OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Wake on keyboard OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Wake on mouse OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
TPM OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Flashrom OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Works fine, both with LinuxBIOS and with the proprietary BIOS. Note that a ST39VF020-70-4C-NHE chip worked on it even though it's not recommended.

Hardware

The PCM-5820 board
The AIM-PC104 module used to validate the CAN bus

Detailed System Information

lspci -tvnn -[0000:00]-+-00.0 Cyrix Corporation PCI Master [1078:0001]

          +-0b.0  Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
          +-12.0  Cyrix Corporation 5530 Legacy [Kahlua] [1078:0100]
          +-12.1  Cyrix Corporation 5530 SMI [Kahlua] [1078:0101]
          +-12.2  Cyrix Corporation 5530 IDE [Kahlua] [1078:0102]
          +-12.3  Cyrix Corporation 5530 Audio [Kahlua] [1078:0103]
          +-12.4  Cyrix Corporation 5530 Video [Kahlua] [1078:0104]
          \-13.0  Compaq Computer Corporation ZFMicro Chipset USB [0e11:a0f8]

/proc/cpuinfo processor : 0 vendor_id : Geode by NSC cpu family : 5 model : 9 model name : Geode(TM) Integrated Processor by National Semi stepping : 2 cpu MHz : 299.247 cache size : 16 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu tsc msr cx8 cmov mmx cxmmx bogomips : 600.56 clflush size : 32

/proc/iomem 00001000-0009ffff : System RAM 000a0000-000bffff : Video RAM area 000f0000-000fffff : System ROM 00100000-0fdfffff : System RAM

 00100000-002baff4 : Kernel code
 002baff5-0033b88b : Kernel data

10000000-100000ff : 0000:00:12.1 40000000-40000fff : scratch_pad_ram

 40000000-40000fff : Geode GX1 Framebuffer

40008000-400080ff : bus_interface

 40008000-400080ff : Geode GX1 Bus Interface

40008100-400082ff : video_pipeline

 40008100-400082ff : Geode GX1 Framebuffer

40008300-400083ff : display_control

 40008300-400083ff : Geode GX1 Framebuffer

40008400-400084ff : memory_control

 40008400-400084ff : Geode GX1 Memory Control

40008500-40008fff : power_control.0 40400000-407fffff : smm_area.0 40800000-487fffff : video_memory

 40800000-487fffff : Geode GX1 Framebuffer

febfc000-febfcfff : 0000:00:12.4

 febfc000-febfcfff : Geode GX1 Framebuffer

febfd000-febfdfff : 0000:00:13.0

 febfd000-febfdfff : ohci_hcd

febfe000-febfe0ff : 0000:00:0b.0

 febfe000-febfe0ff : 8139too

febff000-febff07f : 0000:00:12.3 fffc0000-ffffffff : flash_memory.0

/proc/interrupts

          CPU0       
 0:     183986    XT-PIC-XT        timer
 1:          2    XT-PIC-XT        i8042
 2:          0    XT-PIC-XT        cascade
 4:         91    XT-PIC-XT        serial
 8:          1    XT-PIC-XT        rtc
10:        584    XT-PIC-XT        eth0
11:          0    XT-PIC-XT        ohci_hcd:usb1
12:          3    XT-PIC-XT        i8042
15:       3541    XT-PIC-XT        ide1

NMI: 0 ERR: 0

Building a LinuxBIOS image

$ cd targets
$ ./buildtarget bcom/winnet100
$ cd bcom/winnet100/winnet100
$ LANG=C make

The LANG=C is only for those users (like me) that uses a localised system. Determining some include pathes fails in LB's build system, if the GCC answers in German...

Required patches

--- linux-2.6.22.orig/arch/i386/kernel/cpu/cyrix.c
+++ linux-2.6.22/arch/i386/kernel/cpu/cyrix.c
@@ -178,6 +178,21 @@ static void __cpuinit set_cx86_inc(void)
 	setCx86(CX86_CCR3, ccr3);	/* disable MAPEN */
 }
 
+#ifdef CONFIG_DISABLE_INTERNAL_REGISTERS
+static void __cpuinit disable_internal_chipset(void)
+{
+	printk(KERN_INFO "Disable integrated function access.\n");
+	/*
+	 * this disables the integrated function memory area
+	 *  - disables the scratch pad - full cache is available
+	 *  - disables access to any internal chipset registers
+	 */
+	setCx86(CX86_GCR,0x00);
+}
+#else
+# define disable_internal_chipset()
+#endif
+
 /*
  *	Configure later MediaGX and/or Geode processor.
  */
@@ -197,6 +212,7 @@ static void __cpuinit geode_configure(vo
 
 	/* FPU fast, DTE cache, Mem bypass */
 	setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
+	disable_internal_chipset();
 	setCx86(CX86_CCR3, ccr3);			/* disable MAPEN */
 
 	set_cx86_memwb();
Creative Commons License
Creative Commons Attribution icon
This file is licensed under Creative Commons Attribution 2.5 License.
In short: you are free to distribute and modify the file as long as you attribute its author(s) or licensor(s).