Difference between revisions of "Build HOWTO"

From coreboot
Jump to: navigation, search
m (This is not material for a generic build HOWTO page.)
(updated to git and crossgcc)
Line 26: Line 26:
 
== Building coreboot ==
 
== Building coreboot ==
  
First, get the latest coreboot subversion version:
+
First, get the latest coreboot version from [[Git | our git repository]]:
  
  $ '''svn co svn://coreboot.org/coreboot/trunk coreboot'''
+
  $ '''git clone http://review.coreboot.org/p/coreboot'''
 
  $ '''cd coreboot'''
 
  $ '''cd coreboot'''
  
Line 50: Line 50:
  
 
The file  '''build/coreboot.rom''' is your final coreboot image you can flash onto a ROM chip.
 
The file  '''build/coreboot.rom''' is your final coreboot image you can flash onto a ROM chip.
 +
 +
== Known issue ==
 +
When using modern Linux distributions, it's quite likely to notice a compilation failure when building coreboot for the first time. Before sending a complaint message to our mailing list, please try to switch to our reference cross-compilation toolkit then recompile the sources.
 +
To switch to the cross-compiler just run
 +
 +
$ '''make crossgcc'''
 +
 +
Then retry the compilation process:
 +
 +
$ '''make'''
  
 
== Flashing coreboot ==
 
== Flashing coreboot ==

Revision as of 23:06, 20 June 2011

make menuconfig in coreboot

This page describes how you can build a coreboot image for your specific mainboard using the kconfig system (a.k.a. make menuconfig).

Requirements

  • gcc / g++
  • make
  • ncurses-dev (for make menuconfig)

Optional:

  • doxygen (for generating/viewing documentation)
  • iasl (for targets with ACPI support)
  • gdb (for better debugging facilities on some targets)
  • flex and bison (for regenerating parsers)

Building a payload

First you need to download the source code for the payload of your choice and build it.

Instructions for building the various payloads are not covered on this page, please see Payloads and the wiki page for the respective payload for details.

The result of this step should be an ELF file (e.g. filo.elf, or coreinfo.elf) which you can use with coreboot (see below).

Building coreboot

First, get the latest coreboot version from our git repository:

$ git clone http://review.coreboot.org/p/coreboot
$ cd coreboot

In the coreboot directory you can configure the build-time options of coreboot:

$ make menuconfig

In that menu (which may look familiar, as other projects such as the Linux kernel or busybox use the same system), select at least the following options:

  • Enter the Mainboard menu.
    • In Mainboard vendor select the vendor of your board.
    • In Mainboard model select your exact mainboard name.
    • In ROM chip size select the exact size of the flash ROM chip you want to flash the coreboot image on.
  • Enter the Payload menu.
    • Set the Add a payload option to An ELF executable payload.
    • Then, specify the file name and path to your payload file (which you built before).

That's the bare minimum. Feel free to adjust the other settings to your needs (see Coreboot Options for the full list), then exit menuconfig and build the coreboot image:

$ make

The file build/coreboot.rom is your final coreboot image you can flash onto a ROM chip.

Known issue

When using modern Linux distributions, it's quite likely to notice a compilation failure when building coreboot for the first time. Before sending a complaint message to our mailing list, please try to switch to our reference cross-compilation toolkit then recompile the sources. To switch to the cross-compiler just run

$ make crossgcc

Then retry the compilation process:

$ make

Flashing coreboot

You can flash the coreboot image on a flash ROM chip using either an external EEPROM-programmer or a mainboard using the flashrom user-space utility.

Manipulating coreboot images with cbfstool

TODO