EHCI Gadget Debug: Difference between revisions
Jump to navigation
Jump to search
(11 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
== Howto == | == Howto == | ||
=== Compiling === | |||
* You need to be familiar with (cross) compiling your kernel. | |||
* (Cross) compile it as usual but during the configuration do the following: | |||
Go into Device Drivers: | |||
Device Drivers ---> | |||
Then go into USB support: | |||
[*] USB support ---> | |||
Then go into USB Gadget Support: | |||
<M> USB Gadget Support ---> | |||
Then enable the following option: | |||
<M> EHCI Debug Device Gadget | |||
Then select the printk option for now(a bug has to be fixed to make serial option work properly): | |||
EHCI Debug Device mode (printk) ---> | |||
=== Loading === | |||
Remove all usb gadget drivers such as g_ehter or g_mass_storage with rmmod then do: | |||
modprobe g_dbgp | |||
=== Finding the USB debug port === | |||
See [[EHCI Debug Port#Finding the USB debug port]] | |||
== Tested hardware == | == Tested hardware == | ||
Line 12: | Line 31: | ||
|- | |- | ||
! [http://projects.goldelico.com/p/gta04-main/ Goldelico GTA04 A3] | ! [http://projects.goldelico.com/p/gta04-main/ Goldelico GTA04 A3] | ||
| [https://github.com/goldelico/gta04-kernel/commits/neil-plus neil-plus kernel and branch] | | [https://github.com/goldelico/gta04-kernel/commits/neil-plus neil-plus kernel and branch (3.7)] | ||
| Lenovo X60 | | Lenovo X60 | ||
| {{yes}} | | {{yes}} | ||
|- | |- | ||
! Buglabs's bug 2.0 | ! [http://wiki.buglabs.net/index.php/Welcome_to_BUG_Wiki Buglabs's bug 2.0] | ||
| | | [https://github.com/buglabs/bug20-2.6.35-linaro/commits/master bug20-2.6.35-linaro's master (2.6.35) ] | ||
| Lenovo X60 | | Lenovo X60 | ||
| | | {{yes}} | ||
|- | |- | ||
|} | |} |
Revision as of 16:45, 7 June 2013
Introduction
This page is about using embedded GNU/Linux devices in order to get the USB debug logs.
Howto
Compiling
- You need to be familiar with (cross) compiling your kernel.
- (Cross) compile it as usual but during the configuration do the following:
Go into Device Drivers:
Device Drivers --->
Then go into USB support:
[*] USB support --->
Then go into USB Gadget Support:
<M> USB Gadget Support --->
Then enable the following option:
<M> EHCI Debug Device Gadget
Then select the printk option for now(a bug has to be fixed to make serial option work properly):
EHCI Debug Device mode (printk) --->
Loading
Remove all usb gadget drivers such as g_ehter or g_mass_storage with rmmod then do:
modprobe g_dbgp
Finding the USB debug port
See EHCI Debug Port#Finding the USB debug port
Tested hardware
Brand and Device | kernel used | Target devices | works? |
---|---|---|---|
Goldelico GTA04 A3 | neil-plus kernel and branch (3.7) | Lenovo X60 | Yes |
Buglabs's bug 2.0 | bug20-2.6.35-linaro's master (2.6.35) | Lenovo X60 | Yes |