Difference between revisions of "EHCI Gadget Debug"

From coreboot
Jump to: navigation, search
(Tested hardware: merged)
(Tested hardware)
Line 35: Line 35:
| {{yes}}
| {{yes}}
! Buglabs's bug 2.0
! [http://wiki.buglabs.net/index.php/Welcome_to_BUG_Wiki Buglabs's bug 2.0]
| [https://github.com/buglabs/bug20-2.6.35-linaro/commits/master bug20-2.6.35-linaro's master (2.6.35) ]
| [https://github.com/buglabs/bug20-2.6.35-linaro/commits/master bug20-2.6.35-linaro's master (2.6.35) ]
| Lenovo X60
| Lenovo X60

Revision as of 16:45, 7 June 2013


This page is about using embedded GNU/Linux devices in order to get the USB debug logs.



  • You need to be familiar with (cross) compiling your kernel.
  • (Cross) compile it as usual but during the configuration do the following:

Go into Device Drivers:

Device Drivers  --->

Then go into USB support:

[*] USB support  --->

Then go into USB Gadget Support:

<M>   USB Gadget Support  --->

Then enable the following option:

<M>     EHCI Debug Device Gadget

Then select the printk option for now(a bug has to be fixed to make serial option work properly):

        EHCI Debug Device mode (printk)  --->


Remove all usb gadget drivers such as g_ehter or g_mass_storage with rmmod then do:

modprobe g_dbgp

Finding the USB debug port

See EHCI Debug Port#Finding the USB debug port

Tested hardware

Brand and Device kernel used Target devices works?
Goldelico GTA04 A3 neil-plus kernel and branch (3.7) Lenovo X60 Yes
Buglabs's bug 2.0 bug20-2.6.35-linaro's master (2.6.35) Lenovo X60 Yes