Difference between revisions of "Easy projects"

From coreboot
Jump to: navigation, search
(Test flashrom: flashrom@flashrom.org)
m (coreboot)
Line 45: Line 45:
 
= coreboot =
 
= coreboot =
  
I'll skip explaining what coreboot is. The whole wiki is about this topic and I can't summarize it in one sentence.
+
=== AMD 740G information gathering ===
  
== coreboot v2 ==
+
(This project description is not finished yet)
  
The workhorse version of coreboot. Lots of supported boards, but difficult to work with.
+
If you have a board with AMD 740G chipset, please run (as root)
  
===AMD 740G information gathering===
+
$ '''flashrom -V'''
(This project description is not finished yet)
+
$ '''lspci -nnvvvxxxx'''
 +
$ '''superiotool -deV'''
 +
$ '''dmidecode'''
  
If you have a board with AMD 740G chipset, please run (as root)
 
flashrom -V
 
lspci -nnvvvxxxx
 
superiotool -edV
 
dmidecode
 
 
and mail the output to the [[Mailinglist|coreboot mailing list]] together with the exact model number/name of your board.
 
and mail the output to the [[Mailinglist|coreboot mailing list]] together with the exact model number/name of your board.
  
Line 64: Line 61:
  
 
Here are some boards:
 
Here are some boards:
http://www.czechcomputer.cz/cat_tree.jsp?bpath=Z%C3%A1kladn%C3%AD+desky\Socket+AM2%2B\AMD+740G
 
 
===Use CBFS wherever possible===
 
 
* src/cpu/amd/model_lx/vsmsetup.c is a very good candidate. The VSM blobs should be loaded from CBFS.
 
  
== coreboot v3 ==
+
* http://www.czechcomputer.cz/cat_tree.jsp?bpath=Z%C3%A1kladn%C3%AD+desky\Socket+AM2%2B\AMD+740G
  
The next generation version of coreboot. Few supported boards, still in the design testing phase, easy to work with.
+
=== Use CBFS wherever possible ===
  
TODO: Add easy tasks here.
+
* '''src/cpu/amd/model_lx/vsmsetup.c''' is a very good candidate. The VSM blobs should be loaded from [[CBFS]].
  
 
= Payloads =
 
= Payloads =

Revision as of 16:58, 19 September 2010

You probably came here trying to find a small (minutes to hours) and easy task where you can get your hands dirty and get results immediately.

If you're a coreboot or flashrom newbie, this page is for you.

flashrom

The flashrom tool can read/write coreboot/BIOS images from/to flash chips.

Add timing info to flash chip definitions

Go through the list of flash chips in flashchips.c inside the flashrom source. For each chip (except SPI chips), read through the data sheets and add a comment to the flash chip definition which contains the timing information in microseconds(!) for the probe sequence.

This will make probing a lot more reliable.

Every annotated chip helps.

Add the bus type to flashrom flash chip definitions (done)

Go through the list of flash chips in flashchips.c inside the flashrom source. Look for chip definitions which have .bustype = CHIP_BUSTYPE_NONSPI and look at their data sheets. Read the data sheets and try to figure out the flash bus they use (Parallel/LPC/FWH/SPI). Change the bustype field to CHIP_BUSTYPE_PARALLEL etc. and post a patch to the list.

This will make probing faster and more reliable.

Even a single updated chip helps.

Flashrom#Communication_bus_protocol has a writeup on how to figure out the bus type.

Add new flash chip definitions

We have a few dozen chip IDs listed in flash.h, but not in flashchips.c. Find them, dig up the data sheets and add chip definitions for them to flashchips.c. You can use similar flash chips as a guideline.

This will reduce the number of undetected chips.

Every added chip broadens flashrom support.

Test flashrom

If you have a desktop (no laptops/notebooks/netbooks), please run

flashrom

and check if it finds your flash chip. If it does and any of the operations are listed as unsupported, we'd like to hear about it. If your flash chip is not found, we'd like to hear about it as well.

In both cases, please send the output of

flashrom -V

to the flashrom mailing list.

coreboot

AMD 740G information gathering

(This project description is not finished yet)

If you have a board with AMD 740G chipset, please run (as root)

$ flashrom -V
$ lspci -nnvvvxxxx
$ superiotool -deV
$ dmidecode

and mail the output to the coreboot mailing list together with the exact model number/name of your board.

This helps us evaluate which boards are good targets for coreboot.

Here are some boards:

Use CBFS wherever possible

  • src/cpu/amd/model_lx/vsmsetup.c is a very good candidate. The VSM blobs should be loaded from CBFS.

Payloads

coreboot can use a number of different payloads.

Add/test new supported payloads

  • Test syslinux (probably requires SeaBIOS in addition, needs to be checked).
  • Port GPXE to "native" coreboot (it works fine together with SeaBIOS though).

Other