Ectool: Difference between revisions

From coreboot
Jump to navigation Jump to search
mNo edit summary
(→‎Installation: svn bad. git good.)
 
Line 7: Line 7:
'''Manual installation'''
'''Manual installation'''


  $ '''svn co svn://coreboot.org/coreboot/trunk/util/ectool'''
  $ '''git clone http://review.coreboot.org/coreboot.git'''
  $ '''cd ectool'''
  $ '''cd coreboot/util/ectool'''
  $ '''make'''
  $ '''make'''
  $ '''sudo make install'''
  $ '''sudo make install'''


You can [http://tracker.coreboot.org/trac/coreboot/browser/trunk/util/ectool browse the ectool source code] using the trac web interface.
You can [http://review.coreboot.org/gitweb?p=coreboot.git;a=tree;f=util/ectool;hb=HEAD browse the ectool source code] using the web interface.


== Usage ==
== Usage ==

Latest revision as of 18:42, 20 March 2013

ectool is a small utility that dumps the RAM of a laptop's Embedded/Environmental Controller (EC).

It expects an EC as described in the ACPI specification. Only ACPI-compliant ECs will be detected.

Installation

Manual installation

$ git clone http://review.coreboot.org/coreboot.git
$ cd coreboot/util/ectool
$ make
$ sudo make install

You can browse the ectool source code using the web interface.

Usage

$ ectool

Please see ectool -h for information on various other options.


Public domain I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.