IEI ROCKY 512 - Revision history

Stepan: /* Building a coreboot image */

2010-05-05T08:12:14Z

‎Building a coreboot image

Uwe: IEI ROCKY 512 Build Tutorial moved to IEI ROCKY 512

2008-11-16T15:03:02Z

IEI ROCKY 512 Build Tutorial moved to IEI ROCKY 512

Nikola at 03:37, 12 March 2008

2008-03-12T03:37:52Z

Nikola at 15:55, 11 March 2008

2008-03-11T15:55:41Z

Uwe at 22:26, 10 March 2008

2008-03-10T22:26:28Z

Uwe at 22:16, 10 March 2008

2008-03-10T22:16:32Z

Nikola at 18:52, 9 March 2008

2008-03-09T18:52:29Z

Nikola at 18:51, 9 March 2008

2008-03-09T18:51:59Z

Nikola at 18:47, 9 March 2008

2008-03-09T18:47:29Z

Nikola at 18:15, 9 March 2008

2008-03-09T18:15:20Z

@@ Line 126: / Line 126: @@
 == Building a coreboot image ==
-Note: The ROCKY 512 board uses exactly the same code base as the [[IEI JUKI 511P Build Tutorial|JUKI 511P]], as they're very similar.
+Note: The ROCKY 512 board uses exactly the same code base as the [[IEI JUKI 511P Build Tutorial|JUKI 511P]], as they're very similar. Hence you have to choose the JUKI during coreboot configuration.
- $ cd targets
+See the [[Build HOWTO]] for information on how to build coreboot for this board.
- $ ./buildtarget iei/juki-511p
- $ cd iei/juki-511p/juki-511p
- $ LANG=C make
-−
-The '''LANG=C''' is only for those users that uses a localised system.
 == Using the hardware with a current kernel ==

← Older revision		Revision as of 03:37, 12 March 2008
Line 165:		Line 165:

	\|}		\|}
		+
		+	{{Cc-by-2.5}}

@@ Line 97: / Line 97: @@
 | [[Image:rocky-512_top_small.jpg|thumb|Top.]]
 | [[Image:rocky-512_bottom_small.jpg|thumb|Bottom.]]
 |}
@@ Line 113: / Line 115: @@
   USE_GRUB = 0
   AUTOBOOT_FILE = "hda1:/boot/bzImage syscrtc=/dev/hda1 initrd=hda1:/boot/image.gz clocksource=pit video=gx1fb:monitor:800x600@60,mode:800x600-8@60,crt:1 ide=nodma ide-delay=2 hdb=none ide1=noprobe"
-  AUTOBOOT_DELAY = 1
+  AUTOBOOT_DELAY = 0
   IDE_DISK = 1
   SERIAL_CONSOLE = 1

@@ Line 95: / Line 95: @@
 {| style="float: right; background: transparent; padding: 0px; margin: 0px;"
 |- valign="top"
-| [[Image:rocky-512_top_small.jpg|thumb|The IEI ROCKY-512 mainboard.]]
+| [[Image:rocky-512_top_small.jpg|thumb|Top.]]
-| [[Image:rocky-512_bottom_small.jpg|thumb|The IEI ROCKY-512 mainboard.]]
+| [[Image:rocky-512_bottom_small.jpg|thumb|Bottom.]]
 |}
 * '''GX1-300B-85-20''' Cyrix/National/AMD CPU with 300MHz core clock
@@ Line 106: / Line 104: @@
 * '''RTL8139C''' Realtec network controller
 * '''SST 29F020A''' PLCC32 256kiB flash memory to boot (in a socket)
 == Building FILO ==

@@ Line 32: / Line 32: @@
 |SATA_status = N/A
 |USB_status = OK
 |Onboard_VGA_status = OK
 |Onboard_VGA_comments = VGA support in coreboot works fine (e.g. for displaying a boot logo), for console/X11 you need a special kernel console and Xorg driver.
 |Onboard_ethernet_status = OK
 |Onboard_audio_status = N/A
 |Onboard_modem_status = N/A
@@ Line 104: / Line 102: @@
 * '''GX1-300B-85-20''' Cyrix/National/AMD CPU with 300MHz core clock
-* '''CS5530A-UCE''' part of the chipset, Cyrix/National/AMD companion device
+* '''CS5530A-UCE''' Part of the chipset, Cyrix/National/AMD companion device
-* '''W83977F-A''' Super I/O
+* '''W83977F-A''' Winbond Super I/O
 * '''RTL8139C''' Realtec network controller
 * '''SST 29F020A''' PLCC32 256kiB flash memory to boot (in a socket)
-== Building filo ==
+[[FILO]] config for IEI ROCKY-512 (boot from CF):
-FILO config for IEI ROCKY-512 (boot from CF):
+  USE_GRUB = 0
   AUTOBOOT_FILE = "hda1:/boot/bzImage syscrtc=/dev/hda1 initrd=hda1:/boot/image.gz clocksource=pit video=gx1fb:monitor:800x600@60,mode:800x600-8@60,crt:1 ide=nodma ide-delay=2 hdb=none ide1=noprobe"
- # !!! NOTE !!!
+  AUTOBOOT_DELAY = 1
- # Do NOT add spaces or comments at the end of option lines.
+  IDE_DISK = 1
- # It confuses some versions of make.<br />
- # Use grub instead of autoboot?
-  USE_GRUB = 0<br />
- # Image filename for automatic boot and optional command line parameter
-  AUTOBOOT_FILE = "hda1:/boot/bzImage syscrtc=/dev/hda1 initrd=hda1:/boot/image.gz clocksource=pit video=gx1fb:monitor:800x600@60,mode:800x600-8@60,crt:1 ide=nodma ide-delay=2 hdb=none ide1=noprobe"<br />
- # Time in second before booting AUTOBOOT_FILE
-  AUTOBOOT_DELAY = 1<br />
- # Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-  IDE_DISK = 1<br />
- # Serial console
   SERIAL_CONSOLE = 1
   SERIAL_IOBASE = 0x3f8
- # if SERIAL_SPEED is commented out, the speed will not be changed.
+  # SERIAL_SPEED = 115200
-  #SERIAL_SPEED = 115200<br />
- # Filesystems
   FSYS_EXT2FS = 1
- # i386 options<br />
+  LINUX_LOADER = 1
- # Loader for standard Linux kernel image, a.k.a. /vmlinuz
+  # MULTIBOOT_IMAGE = 1
-  LINUX_LOADER = 1<br />
- # Boot FILO from Multiboot loader (eg. GRUB)
   #MULTIBOOT_IMAGE = 1
 == Building a coreboot image ==
   $ cd targets

@@ Line 47: / Line 47: @@
 |ISA_cards_comments = Tested with backplane IP-6S.
 |AMR_cards_status = N/A
-|PCI_cards_status = OK
+|PCI_cards_status = N/A
-|PCI_cards_comments = Tested with backplane IP-6S.
 |AGP_cards_status = N/A
 |PCIE_x1_status = N/A
@@ Line 62: / Line 61: @@
 |COM2_status = OK
 |PP_status = OK
 |PS2_keyboard_status = OK
 |PS2_mouse_status = OK
@@ Line 110: / Line 108: @@
 * '''RTL8139C''' Realtec network controller
 * '''SST 29F020A''' PLCC32 256kiB flash memory to boot (in a socket)
 == Building a coreboot image ==
@@ Line 124: / Line 151: @@
 The current 2.6.23 kernel does not know the CS5530 interrupt router. So it is impossible to let the kernel itself setup PCI's interrupt routing. Even if you provide the kernel with a valid interrupt routing table (PIRQ). No interrupts will work as the interrupt routing registers are still left at their reset values.
 The small patch below solves this issue (it was rejected in mainline as it breaks various standard BIOS based Geode systems, as they were shipped with broken PIRQ tables [http://lkml.org/lkml/2006/11/24/47]).