Uwe at 16:44, 7 November 2010

2010-11-07T16:44:17Z

Uwe: moved INTEL D810E2CB to Intel D810E2CB

2010-11-07T16:31:29Z

Linux junkie: Created page with 'This HOWTO describes how to use coreboot on the [http://support.gateway.com/s/MOTHERBD/INTEL/2514906/2514906nv.shtml Intel D810E2CB] board. == Status == {{Status| |CPU_status …'

2010-06-27T19:39:42Z

Created page with 'This HOWTO describes how to use coreboot on the [http://support.gateway.com/s/MOTHERBD/INTEL/2514906/2514906nv.shtml Intel D810E2CB] board. == Status == {{Status| |CPU_status …'

New page

This HOWTO describes how to use coreboot on the [http://support.gateway.com/s/MOTHERBD/INTEL/2514906/2514906nv.shtml Intel D810E2CB] board.

== Status ==

{{Status|

|CPU_status = OK
|CPU_L1_status = OK
|CPU_L1_comments = N/A
|CPU_L2_status = OK
|CPU_L3_status = N/A
|CPU_multiple_status = N/A
|CPU_multicore_status = N/A
|CPU_virt_status = N/A

|RAM_EDO_status = N/A
|RAM_SDRAM_status = WIP
|RAM_SDRAM_comments = Single-sided DIMMs in slot 0 work fine. Other combinations may or may not work, this is WIP.
|RAM_SODIMM_status = N/A
|RAM_DDR_status = N/A
|RAM_DDR2_status = N/A
|RAM_DDR3_status = N/A
|RAM_dualchannel_status = N/A
|RAM_ecc_status = N/A

|IDE_status = OK
|IDE_25_status = N/A
|SATA_status = N/A
|USB_status = OK
|USB_comments = Tested: USB thumb drive (booted), USB Keyboard, and USB Mouse.
|Onboard_VGA_status = OK
|Onboard_VGA_comments = N/A
|Onboard_ethernet_status = N/A
|Onboard_audio_status = OK
|Onboard_modem_status = Untested
|Onboard_firewire_status = N/A
|Smartcard_status = N/A
|Onboard_CF_status = N/A
|Onboard_PCMCIA_status = N/A
|Onboard_SCSI_status = N/A

|ISA_cards_status = N/A
|AMR_cards_status = Untested
|Mini_PCI_cards_status = N/A
|PCIX_cards_status = N/A
|AGP_cards_status = N/A
|PCI_cards_status = OK
|PCI_cards_comments = PCI card works in each of the two PCI slots.
|PCIX_cards_status = N/A
|PCIE_x1_status = N/A
|PCIE_x2_status = N/A
|PCIE_x4_status = N/A
|PCIE_x8_status = N/A
|PCIE_x16_status = N/A
|PCIE_x32_status = N/A
|HTX_status = N/A

|Floppy_status = Untested
|COM1_status = OK
|COM2_status = N/A
|PP_status = OK
|PP_comments = Loading the '''ppdev'''/'''parport_pc''' Linux kernel modules works fine, other tests were not done.
|PS2_keyboard_status = OK
|PS2_mouse_status = OK
|Game_port_status = OK
|Game_port_comments = N/A
|IR_status = Untested
|Speaker_status = OK
|Speaker_comments = N/A
|DiskOnChip_status = N/A

|Sensors_status = OK
|Sensors_comments = N/A
|Watchdog_status = OK
|Watchdog_comments = N/A
|SMBus_status = N/A
|CAN_bus_status = N/A
|CPUfreq_status = Untested
|Powersave_status = N/A
|ACPI_status = WIP
|ACPI_comments = There is no ACPI implementation for this board, yet.
|Reboot_status = OK
|Poweroff_status = WIP
|Poweroff_comments = Probably needs ACPI in order to work.
|LEDs_status = N/A
|LEDs_comments = N/A
|HPET_status = N/A
|RNG_status = N/A
|WakeOnModem_status = Untested
|WakeOnLAN_status = Untested
|WakeOnKeyboard_status = Untested
|WakeOnMouse_status = Untested
|Flashrom_status = OK
|Flashrom_comments = N/A

}}

== Building coreboot ==

See the [[Build HOWTO]] for information on how to build coreboot for this board.

{{PD-self}}

@@ Line 7: / Line 7: @@
 |CPU_status = OK
 |CPU_L1_status = OK
 |CPU_L2_status = OK
 |CPU_L3_status = N/A
@@ Line 28: / Line 27: @@
 |SATA_status = N/A
 |USB_status = OK
-|USB_comments = Tested: USB thumb drive (booted), USB Keyboard, and USB Mouse.
+|USB_comments = Tested: USB thumb drive (booted), USB keyboard, and USB mouse.
 |Onboard_VGA_status = OK
 |Onboard_VGA_comments = N/A
@@ Line 96: / Line 95: @@
 }}
 {{PD-self}}

Intel D810E2CB - Revision history

Uwe at 16:44, 7 November 2010

Uwe: moved INTEL D810E2CB to Intel D810E2CB

Linux junkie: Created page with 'This HOWTO describes how to use coreboot on the [http://support.gateway.com/s/MOTHERBD/INTEL/2514906/2514906nv.shtml Intel D810E2CB] board. == Status == {{Status| |CPU_status …'