Jetway J7F2
From coreboot
This page describes how to use coreboot on the Jetway J7F2 series mainboards.
This page is a work in progress.
Status
TODO: This is work in progress!
This board works with the Epia-CN tree except that it uses a Fintek F71805F vs VIA VT1211 super io. Replace the code accordingly.
| Device/functionality | Status | Comments | ||||||
|---|---|---|---|---|---|---|---|---|
| CPU | ||||||||
| CPU works | OK | |||||||
| L1 cache enabled | OK | Always on | ||||||
| L2 cache enabled | OK | Always on | ||||||
| L3 cache enabled | N/A | |||||||
| Multiple CPU support | N/A | |||||||
| Multi-core support | N/A | |||||||
| Hardware virtualization | N/A | |||||||
| RAM | ||||||||
| EDO | N/A | |||||||
| SDRAM | N/A | |||||||
| SO-DIMM | N/A | |||||||
| DDR | N/A | |||||||
| DDR2 | OK | |||||||
| DDR3 | N/A | |||||||
| Dual channel support | N/A | |||||||
| ECC support | ? | |||||||
| On-board Hardware | ||||||||
| On-board IDE 3.5" | OK | |||||||
| On-board IDE 2.5" | N/A | |||||||
| On-board SATA | OK | |||||||
| On-board SCSI | Unknown | |||||||
| On-board USB | OK | |||||||
| On-board VGA | OK | |||||||
| On-board ethernet | OK | |||||||
| On-board audio | OK | |||||||
| On-board modem | ||||||||
| On-board FireWire | N/A | |||||||
| On-board smartcard reader | N/A | |||||||
| On-board CompactFlash | N/A | |||||||
| On-board PCMCIA | N/A | |||||||
| Add-on slots/cards | ||||||||
| ISA add-on cards | N/A | |||||||
| Audio/Modem-Riser (AMR/CNR) cards | N/A | |||||||
| PCI add-on cards | ||||||||
| Mini-PCI add-on cards | Unknown | |||||||
| PCI-X add-on cards | Unknown | |||||||
| AGP graphics cards | N/A | |||||||
| PCI Express x1 add-on cards | N/A | |||||||
| PCI Express x2 add-on cards | N/A | |||||||
| PCI Express x4 add-on cards | N/A | |||||||
| PCI Express x8 add-on cards | N/A | |||||||
| PCI Express x16 add-on cards | N/A | |||||||
| PCI Express x32 add-on cards | N/A | |||||||
| HTX add-on cards | N/A | |||||||
| Legacy / Super I/O | ||||||||
| Floppy | N/A | |||||||
| Serial port 1 (COM1) | OK | |||||||
| Serial port 2 (COM2) | N/A | |||||||
| Parallel port | ||||||||
| PS/2 keyboard | OK | |||||||
| PS/2 mouse | OK | |||||||
| Game port | N/A | |||||||
| Infrared | ? | |||||||
| PC speaker | ? | |||||||
| DiskOnChip | N/A | |||||||
| Miscellaneous | ||||||||
| Sensors / fan control | ? | |||||||
| Hardware watchdog | ? | |||||||
| SMBus | Unknown | |||||||
| CAN bus | N/A | |||||||
| CPU frequency scaling | ? | |||||||
| Other powersaving features | N/A | |||||||
| ACPI | ? | |||||||
| Reboot | ||||||||
| Poweroff | ||||||||
| Suspend | Unknown | |||||||
| Nonstandard LEDs | N/A | |||||||
| High precision event timers (HPET) | ? | |||||||
| Random number generator (RNG) | N/A | |||||||
| Wake on modem ring | Untested | |||||||
| Wake on LAN | Untested | |||||||
| Wake on keyboard | Untested | |||||||
| Wake on mouse | Untested | |||||||
| Flashrom | ||||||||
Known problems
- hda in Linux is hde in FILO
- loading kernel/initrd is very slow
- irq_tables.c from the factory BIOS does not work. The epia-cn table can be substituted.
- VGA console flickers badly under intense disk activity, such as dd if=/dev/hda of=/dev/hdc
- Network card loses MAC address on power-loss, preventing the Linux via-rhine driver from activating it. Latest code in src/southbridge/via/vt8237r/ may fix this, at least allowing hard-coding the MAC address into the rom. However, it is also stored somewhere else on the system (not in the factory rom) so it should be readable from somewhere.
| |
I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.
In case this is not legally possible: |