Difference between revisions of "Board:kontron/986lcd-m"

From coreboot
Jump to: navigation, search
(Add initial status table.)
Line 95: Line 95:
  
 
The resulting '''coreboot.rom''' is your coreboot ROM image you can flash using [[flashrom]].
 
The resulting '''coreboot.rom''' is your coreboot ROM image you can flash using [[flashrom]].
 +
 +
== FILO ==
 +
 +
If you use [[FILO]], SATA will probably be '''hda''' and '''hdb''', while '''hdc''' is the master drive of the IDE controller.
 +
  
 
{{PD-self}}
 
{{PD-self}}

Revision as of 20:39, 15 December 2008

This page describes how to use coreboot on the Kontron 986LCD-M/mITX mainboard. It is maintained by Uwe Hermann.

Status

Device/functionality Status Comments
CPU
CPU works  ?
L1 cache enabled  ?
L2 cache enabled  ?
L3 cache enabled  ?
Multiple CPU support  ?
Multi-core support  ?
Hardware virtualization  ?
RAM
EDO N/A
SDRAM N/A
SO-DIMM N/A
DDR N/A
DDR2  ?
DDR3 N/A
Dual channel support N/A
ECC support  ?
On-board Hardware
On-board IDE 3.5" OK
On-board IDE 2.5" N/A
On-board SATA  ?
On-board SCSI N/A
On-board USB  ?
On-board VGA  ?
On-board ethernet  ?
On-board audio  ?
On-board modem  ?
On-board FireWire  ?
On-board smartcard reader N/A
On-board CompactFlash N/A
On-board PCMCIA N/A
Add-on slots/cards
ISA add-on cards N/A
Audio/Modem-Riser (AMR/CNR) cards N/A
PCI add-on cards  ?
Mini-PCI add-on cards Unknown
PCI-X add-on cards Unknown
AGP graphics cards N/A
PCI Express x1 add-on cards N/A
PCI Express x2 add-on cards N/A
PCI Express x4 add-on cards N/A
PCI Express x8 add-on cards N/A
PCI Express x16 add-on cards  ?
PCI Express x32 add-on cards N/A
HTX add-on cards N/A
Legacy / Super I/O
Floppy  ?
Serial port 1 (COM1) OK
Serial port 2 (COM2)  ?
Parallel port  ?
PS/2 keyboard  ?
PS/2 mouse  ?
Game port N/A
Infrared  ?
PC speaker  ?
DiskOnChip N/A
Miscellaneous
Sensors / fan control  ?
Hardware watchdog  ?
SMBus  ?
CAN bus N/A
CPU frequency scaling  ?
Other powersaving features  ?
ACPI  ?
Reboot  ?
Poweroff  ?
Suspend Unknown
Nonstandard LEDs  ?
High precision event timers (HPET)  ?
Random number generator (RNG)  ?
Wake on modem ring  ?
Wake on LAN  ?
Wake on keyboard  ?
Wake on mouse  ?
Flashrom OK Works fine, but you have to use -m kontron:986lcd-m.

Build tutorial

$ svn co svn://coreboot.org/repos/trunk/coreboot-v2
$ cd coreboot-v2/targets
$ ./buildtarget kontron/986lcd-m
$ cd kontron/986lcd-m/kontron_986lcd_m

Now copy your payload into the current directory and name it payload.elf. Then:

$ make -s

The resulting coreboot.rom is your coreboot ROM image you can flash using flashrom.

FILO

If you use FILO, SATA will probably be hda and hdb, while hdc is the master drive of the IDE controller.


Public domain I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.