Difference between revisions of "LinuxBIOS Symposium 2006"

From coreboot
Jump to: navigation, search
(Ward Vandewege)
Line 4: Line 4:
 
* Keyboards - PS2  
 
* Keyboards - PS2  
 
* US/German power converters.
 
* US/German power converters.
 +
 +
== Uwe Hermann ==
 +
 +
* 3 USB-to-PS2 converters
 +
* ca. 10 PLCC chips of various brands/sizes
 +
* ca. 5 DIP chips of various brands/sizes
 +
* a test laptop (SIS 650/691) with socketed PLCC chip:
 +
* Maybe one or two motherboards, if there's room left
  
 
== Ron Minnich ==
 
== Ron Minnich ==
Line 46: Line 54:
 
* USB -> 2.5 IDE HD (Needs above)
 
* USB -> 2.5 IDE HD (Needs above)
 
* Max Speed Max Term motherboard (needs above)
 
* Max Speed Max Term motherboard (needs above)
 +
 +
== Peter Stuge ==
 +
* mostly working EPIA-MII with 6-26v 60w atx picoPSU
 +
* a spare samsung 256mb ddr ram
 +
* ide2cf
 +
* pcmcia2cf
 +
* cf cards
 +
* soekris net4801
 +
* soekris net4826
 +
* prism2/atheros minipci/pci/pcmcia abg/bg/b wifi cards
 +
* pci 1394a without rom
 +
* old agp/pci vga cards with rom
 +
* pci aha-2940au scsi with rom
 +
* 8x100 ethernet switch, some 10m cables, parts for making cables
 +
* usb2serial
 +
* sata/ata/usb/1394/nullmodem cables
 +
* usb flash drive if I can find one
 +
* some plcc 512k am29lf040b and one 256k sst39sf020a
 +
* plcc remover tool
 +
* miniature screwdrivers (aka diy plcc remover tool)
 +
* usb2sata 3.5" case
 +
* usb fdd
 +
* usb hub(s)
 +
* ac-12v 1.5a psu
 +
* ac-12v 2.5a psu
 +
* ac-3/5/9/12v 2.5a psu
 +
* ac-power-over-ethernet injector
 +
* a dumb euro power strip or two
 +
* a 5m extension cord or two
 +
* cd-r/dvd-r media
 +
* flashlight
 +
* 10" gray vga crt
 +
* ps/2 .se keyboard
  
 
== Stefan Reinauer ==
 
== Stefan Reinauer ==
Line 67: Line 108:
 
* (multimeter+soldering iron)
 
* (multimeter+soldering iron)
 
* Beamer
 
* Beamer
 
== Uwe Hermann ==
 
 
* 3 USB-to-PS2 converters
 
* ca. 10 PLCC chips of various brands/sizes
 
* ca. 5 DIP chips of various brands/sizes
 
* a test laptop (SIS 650/691) with socketed PLCC chip:
 
* Maybe one or two motherboards, if there's room left
 
  
 
== Ward Vandewege ==
 
== Ward Vandewege ==

Revision as of 21:47, 28 September 2006

Required Hardware

  • Monitor(s) - 1 Flatpanel (Stefan)
  • Keyboards - PS2
  • US/German power converters.

Uwe Hermann

  • 3 USB-to-PS2 converters
  • ca. 10 PLCC chips of various brands/sizes
  • ca. 5 DIP chips of various brands/sizes
  • a test laptop (SIS 650/691) with socketed PLCC chip:
  • Maybe one or two motherboards, if there's room left

Ron Minnich

  • usb to serial (2)
  • 1M flash parts 49lf008a
  • 512K flash parts. 49lf004
  • epia that works
  • digital logic msm800sev that is in progress
  • lippert frontrunner that is in progress.
  • serial and ethernet cables.
  • several enet switches.
  • outlet strips
  • CF cards
  • IDE->CF adapters
  • USB storage dongles
  • RUMBA board for burning flash parts.
  • PCMCIA->CF
  • USB->CF
  • several IBM power warts
  • 3 OLPC

Richard Smith

  • 1 OLPC
  • USB -> 3.5 IDE HD
  • a couple of 3.5 IDE HD's
  • USB CDR/DVD burner.
  • ASUS P2B i440bx mother board
  • 4 in 1 screwdriver.
  • Small screwdriver for pulling DIPs
  • Several 29F040b PLCC, Some DIPs I pulled from old motherboards
  • ATX powersupply
  • USB mouse.
  • Small PS/2 keyboard
  • USB -> PS/2 adapter.
  • several cheap not surge protected powerstrips. (If they blow up no loss)
  • serveral EU to US plug adapters.

Stuff I was bringing but decided not to

  • 500W 220 -> 110V transformer. (this thing is a cavity search waiting to happen)
  • USB -> 2.5 IDE HD (Needs above)
  • Max Speed Max Term motherboard (needs above)

Peter Stuge

  • mostly working EPIA-MII with 6-26v 60w atx picoPSU
  • a spare samsung 256mb ddr ram
  • ide2cf
  • pcmcia2cf
  • cf cards
  • soekris net4801
  • soekris net4826
  • prism2/atheros minipci/pci/pcmcia abg/bg/b wifi cards
  • pci 1394a without rom
  • old agp/pci vga cards with rom
  • pci aha-2940au scsi with rom
  • 8x100 ethernet switch, some 10m cables, parts for making cables
  • usb2serial
  • sata/ata/usb/1394/nullmodem cables
  • usb flash drive if I can find one
  • some plcc 512k am29lf040b and one 256k sst39sf020a
  • plcc remover tool
  • miniature screwdrivers (aka diy plcc remover tool)
  • usb2sata 3.5" case
  • usb fdd
  • usb hub(s)
  • ac-12v 1.5a psu
  • ac-12v 2.5a psu
  • ac-3/5/9/12v 2.5a psu
  • ac-power-over-ethernet injector
  • a dumb euro power strip or two
  • a 5m extension cord or two
  • cd-r/dvd-r media
  • flashlight
  • 10" gray vga crt
  • ps/2 .se keyboard

Stefan Reinauer

  • Via Epia-M
  • GBit Switch
  • WIFI Routers
  • Galep IV Flash burner for DIL and PLCC
  • some power strips
  • CE power chords
  • remote power switch
  • USB->CF
  • Bios Savior+USB control
  • chip pullers
  • a USB keyboard
  • some serial cables (nullmodem)
  • usb2serial converter
  • usb debug device
  • usb flash stick + usb hard drive
  • usb hub
  • (multimeter+soldering iron)
  • Beamer

Ward Vandewege

  • Bios Savior (512KB)
  • plcc removal tool
  • Serial cable (DB9 female/DB9 female)
  • USB to serial cable (DB9 male)
  • USB -> 2.5 IDE case with 2.5" IDE drive
  • IDE 3.5" -> 2.5" converters
  • couple of EU -> US plug converters
  • lots of anti-drm and GNU/linux stickers