LinuxBIOS Symposium 2006

From coreboot
Revision as of 17:10, 26 September 2006 by RSmith (Talk | contribs)

Jump to: navigation, search

Required Hardware

  • Monitor(s) - 1 Flatpanel (Stefan)
  • Keyboards - PS2
  • US/German power converters.

Ron Minnich

  • usb to serial (2)
  • 1M flash parts 49lf008a
  • 512K flash parts. 49lf004
  • epia that works
  • digital logic msm800sev that is in progress
  • lippert frontrunner that is in progress.
  • serial and ethernet cables.
  • several enet switches.
  • outlet strips
  • CF cards
  • IDE->CF adapters
  • USB storage dongles
  • RUMBA board for burning flash parts.
  • PCMCIA->CF
  • USB->CF
  • several IBM power warts
  • 3 OLPC

Richard Smith

  • 1 OLPC
  • USB -> 2.5 IDE HD
  • USB -> 3.5 IDE HD
  • a couple of 3.5 IDE HD's
  • USB CDR/DVD burner.
  • ASUS P2B i440bx mother board
  • Max Speed Max Term motherboard
  • 4 in 1 screwdriver.
  • Small screwdriver for pulling DIPs
  • Several 20F040b PLCC, Some DIPs I pulled from old motherboards
  • ATX powersupply
  • USB mouse.
  • Small PS/2 keyboard
  • USB -> PS/2 adapter.
  • 500W 220 -> 110V transformer.
  • several cheap not surge protected powerstrips. (If they blow up no loss)
  • serveral EU to US plug adapters.

Stefan Reinauer

  • Via Epia-M
  • GBit Switch
  • WIFI Routers
  • Galep IV Flash burner for DIL and PLCC
  • some power strips
  • CE power chords
  • remote power switch
  • USB->CF
  • Bios Savior+USB control
  • chip pullers
  • a USB keyboard
  • some serial cables (nullmodem)
  • usb2serial converter
  • usb debug device
  • usb flash stick + usb hard drive
  • usb hub
  • (multimeter+soldering iron)
  • Beamer

Uwe Hermann

  • 3 USB-to-PS2 converters
  • ca. 10 PLCC chips of various brands/sizes
  • ca. 5 DIP chips of various brands/sizes
  • a test laptop (SIS 650/691) with socketed PLCC chip:
  • Maybe one or two motherboards, if there's room left