LinuxBIOS Symposium 2006
Time and Date
The LinuxBIOS Symposium 2006 took place in Hamburg, Germany from October 1st to October 3rd 2006.
Photos of the Symposium
The agenda is available here.
Talks & Discussion
- Integrator's Guide
- Development Guidelines
- ACPI in LinuxBIOS
- The future of LinuxBIOS
- What is the best Payload?
- Programmer's Manual
- Datasheet Trouble
- Automatic Regression Testing
- Targeting Millions
Jiming Sun, Sohoon Lee
- All of Ron's talks in a single PDF.
We were having a real Hacker's Paradise at the Symposium, amongst others:
- 3 USB-to-PS2 converters
- ca. 10 PLCC chips of various brands/sizes
- ca. 5 DIP chips of various brands/sizes
- a test laptop (SIS 650/691) with socketed PLCC chip:
- Maybe one or two motherboards, if there's room left
- usb to serial (2)
- 1M flash parts 49lf008a
- 512K flash parts. 49lf004
- epia that works
- digital logic msm800sev that is in progress
- lippert frontrunner that is in progress.
- serial and ethernet cables.
- several enet switches.
- outlet strips
- CF cards
- IDE->CF adapters
- USB storage dongles
- RUMBA board for burning flash parts.
- several IBM power warts
- 3 OLPC
- 1 OLPC
- USB -> 3.5 IDE HD
- a couple of 3.5 IDE HD's
- USB CDR/DVD burner.
- ASUS P2B i440bx mother board
- 4 in 1 screwdriver.
- Small screwdriver for pulling DIPs
- Several 29F040b PLCC, Some DIPs I pulled from old motherboards
- ATX powersupply
- USB mouse.
- Small PS/2 keyboard
- USB -> PS/2 adapter.
- several cheap not surge protected powerstrips. (If they blow up no loss)
- serveral EU to US plug adapters.
Stuff I was bringing but decided not to
- 500W 220 -> 110V transformer. (this thing is a cavity search waiting to happen)
- USB -> 2.5 IDE HD (Needs above)
- Max Speed Max Term motherboard (needs above)
- mostly working EPIA-MII with 6-26v 60w atx picoPSU
- a spare samsung 256mb ddr ram
- cf cards
- soekris net4801
- soekris net4826
- prism2/atheros minipci/pci/pcmcia abg/bg/b wifi cards
- pci 1394a without rom
- old agp/pci vga cards with rom
- pci aha-2940au scsi with rom
- 8x100 ethernet switch, some 10m cables, parts for making cables
- sata/ata/usb/1394/nullmodem cables
- usb flash drive if I can find one
- some plcc 512k am29lf040b and one 256k sst39sf020a
- plcc remover tool
- miniature screwdrivers (aka diy plcc remover tool)
- usb2sata 3.5" case
- usb fdd
- usb hub(s)
- ac-12v 1.5a psu
- ac-12v 2.5a psu
- ac-3/5/9/12v 2.5a psu
- ac-power-over-ethernet injector
- a dumb euro power strip or two
- a 5m extension cord or two
- cd-r/dvd-r media
- 10" gray vga crt
- ps/2 .se keyboard
- Via Epia-M
- GBit Switch
- WIFI Routers
- Galep IV Flash burner for DIL and PLCC
- some power strips
- CE power chords
- remote power switch
- Bios Savior+USB control
- chip pullers
- a USB keyboard
- some serial cables (nullmodem)
- usb2serial converter
- usb debug device
- usb flash stick + usb hard drive
- usb hub
- (multimeter+soldering iron)
- Bios Savior (512KB)
- plcc removal tool
- Serial cable (DB9 female/DB9 female)
- USB to serial cable (DB9 male)
- USB -> 2.5 IDE case with 2.5" IDE drive
- IDE 3.5" -> 2.5" converters
- couple of EU -> US plug converters
- lots of anti-drm and GNU/linux stickers