MSI JSPI1
From coreboot
JSPI1 is a 5×2 2.0mm pitch pin header on many MSI motherboards. It is used to recover from bad boot ROM images. Specifically, it appears to be used to connect an alternate ROM with a working image. Pull the #HOLD line low to deselect the onboard SPI ROM, allowing another SPI ROM to take its place on the bus.
| name | pin | pin | name |
|---|---|---|---|
| 3VSB | 1 | 2 | 3VSB |
| MISO | 3 | 4 | MOSI |
| #SS | 5 | 6 | SCLK |
| GND | 7 | 8 | GND |
| #HOLD | 9 | 10 | NC |
| name | function |
|---|---|
| 3VSB | standby 3.3V |
| MISO | SPI Master In/Slave Out |
| MOSI | SPI Slave Out/Master In |
| #SS | SPI Slave (Chip) Select (active low) |
| SCLK | SPI Clock |
| GND | ground/common |
| #HOLD | SPI hold (active low) |
| NC | Not Connected (no pin) |
