Board:mitac/6513wu

From coreboot
Revision as of 14:28, 6 July 2009 by Uwe (Talk | contribs)

Jump to: navigation, search

This page describes how to use coreboot on the Mitac 6513WU board.

Status

Device/functionality Status Comments
CPU
CPU works
L1 cache enabled
L2 cache enabled
L3 cache enabled
Multiple CPU support N/A
Multi-core support N/A
Hardware virtualization N/A
RAM
EDO N/A
SDRAM WIP Single-sided DIMMs in slot 0 should work fine. Other combinations may or may not work, this is WIP.
SO-DIMM N/A
DDR N/A
DDR2 N/A
DDR3 N/A
Dual channel support
ECC support
On-board Hardware
On-board IDE 3.5"
On-board IDE 2.5" N/A
On-board SATA N/A
On-board SCSI N/A
On-board USB
On-board VGA Untested Needs a small patch for now (?)
On-board ethernet N/A
On-board audio
On-board modem Untested
On-board FireWire N/A
On-board smartcard reader N/A
On-board CompactFlash N/A
On-board PCMCIA N/A
Add-on slots/cards
ISA add-on cards N/A
Audio/Modem-Riser (AMR/CNR) cards
PCI add-on cards
Mini-PCI add-on cards N/A
PCI-X add-on cards N/A
AGP graphics cards N/A
PCI Express x1 add-on cards N/A
PCI Express x2 add-on cards N/A
PCI Express x4 add-on cards N/A
PCI Express x8 add-on cards N/A
PCI Express x16 add-on cards N/A
PCI Express x32 add-on cards N/A
HTX add-on cards N/A
Legacy / Super I/O
Floppy Untested
Serial port 1 (COM1)
Serial port 2 (COM2) Untested
Parallel port
PS/2 keyboard
PS/2 mouse
Game port
Infrared
PC speaker
DiskOnChip N/A
Miscellaneous
Sensors / fan control
Hardware watchdog
SMBus N/A
CAN bus N/A
CPU frequency scaling Untested
Other powersaving features N/A
ACPI No There is no ACPI implementation for this board, yet.
Reboot
Poweroff Probably needs ACPI in order to work.
Suspend Unknown
Nonstandard LEDs
High precision event timers (HPET)
Random number generator (RNG)
Wake on modem ring Untested
Wake on LAN Untested
Wake on keyboard Untested
Wake on mouse Untested
Flashrom

Building coreboot

$ svn co svn://coreboot.org/repos/trunk/coreboot-v2
$ cd coreboot-v2/targets
$ ./buildtarget mitac/6513wu
$ cd mitac/6513wu/6513wu

Now copy your desired payload into the current directory and name it payload.elf. Then:

$ make

Finally, prepend the VGA BIOS image (32 KB) to get your final coreboot image:

$ cat vga.bin coreboot.rom > coreboot_final.rom

(replace vga.bin with the file name of your VGA BIOS image)

You can now flash the resulting coreboot_final.rom on a ROM chip using Flashrom.


Public domain I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.