Difference between revisions of "Nokia IP330"

From coreboot
Jump to: navigation, search
(Development status)
Line 25: Line 25:
  
 
The current development status is; No coreboot running yet
 
The current development status is; No coreboot running yet
 +
 +
 +
 +
== Hardware status ==
 +
 +
{{Status|
 +
 +
|CPU_status = OK
 +
|CPU_comments = PIII SL5DV (1000 / 256 / 133 / 1.75V)
 +
|CPU_L1_status = OK
 +
|CPU_L1_comments = CPU: L1 I cache: 16K, L1 D cache: 16K
 +
|CPU_L2_status = OK
 +
|CPU_L2_comments = L2 cache is standard for the P3-68X models
 +
|CPU_L3_status = N/A
 +
|CPU_multiple_status = N/A
 +
|CPU_multicore_status = N/A
 +
|CPU_virt_status = N/A
 +
 +
|RAM_EDO_status = N/A
 +
|RAM_SDRAM_status = OK
 +
|RAM_SDRAM_comments = upto 4 single sided 128Mb or 4 dual sided 256Mb
 +
|RAM_SODIMM_status = N/A
 +
|RAM_DDR_status = N/A
 +
|RAM_DDR2_status = N/A
 +
|RAM_DDR3_status = N/A
 +
|RAM_dualchannel_status = N/A
 +
|RAM_ecc_status = WIP
 +
|RAM_ecc_comments = Not yet supported by the coreboot 440BX code, but it's on our TODO list.
 +
 +
|IDE_status = OK
 +
|IDE_comments = Primary and secondary controllers, the primary controller has a Compact Flash slot attached on board, as primary drive.
 +
|IDE_25_status = N/A
 +
|SATA_status = N/A
 +
|USB_status = OK
 +
|USB_comments = The USB is not routed to any connector, u can be picked up from the board it self, there is an instruction below on this wiki-page how to do this
 +
|Onboard_VGA_status = N/A
 +
|Onboard_ethernet_status = OK
 +
|Onboard_ethernet_comments = Four intel 21143PD controllers.
 +
|Onboard_audio_status = N/A
 +
|Onboard_modem_status = N/A
 +
|Onboard_firewire_status = N/A
 +
|Smartcard_status = N/A
 +
|Onboard_CF_status = OK
 +
|Onboard_CF_comments = Is wrired are primary drive on primary IDE controller.
 +
|Onboard_PCMCIA_status = OK
 +
|Onboard_PCMCIA_comments = Texas Instruments PCI1225 PCMCIA/Cardbus controller
 +
|Onboard_SCSI_status = N/A
 +
 +
|ISA_cards_status = N/A
 +
|AMR_cards_status = N/A
 +
|Mini_PCI_cards_status = N/A
 +
|PCIX_cards_status = N/A
 +
|PCI_cards_status = OK
 +
|PCI_cards_comments = Tested: With 4 Ethernet adapter card of Nokia (Compact-PCI slots)
 +
|AGP_cards_status = N/A
 +
|PCIE_cards_status = N/A
 +
|PCIE_x1_status = N/A
 +
|PCIE_x2_status = N/A
 +
|PCIE_x4_status = N/A
 +
|PCIE_x8_status = N/A
 +
|PCIE_x16_status = N/A
 +
|PCIE_x32_status = N/A
 +
|HTX_status = N/A
 +
 +
|Floppy_status = N/A
 +
|COM1_status = OK
 +
|COM2_status = OK
 +
|PP_status = N/A
 +
|PS2_keyboard_status = OK
 +
|PS2_keyboard_comments = Internal 4 pin connector J-KBD
 +
|PS2_mouse_status = N/A
 +
|Game_port_status = N/A
 +
|IR_status = N/A
 +
|Speaker_status = N/A
 +
|DiskOnChip_status = N/A
 +
 +
|Sensors_status = WIP
 +
|Watchdog_status = N/A
 +
|CAN_bus_status = N/A
 +
|CPUfreq_status = N/A
 +
|Powersave_status = N/A
 +
|ACPI_status = No
 +
|ACPI_comments = There's no ACPI implementation for this board, but it's on our TODO list.
 +
|SMBus_status = WIP
 +
|Reboot_status = N/A
 +
|Poweroff_status = N/A
 +
|LEDs_status = OK
 +
|LEDs_comments = Special-purpose LEDs available on the board, '''Alert''' and '''Fault''' are controlled by the superio
 +
|HPET_status = N/A
 +
|RNG_status = N/A
 +
|WakeOnModem_status = N/A
 +
|WakeOnLAN_status = N/A
 +
|WakeOnKeyboard_status = N/A
 +
|WakeOnMouse_status = N/A
 +
|Flashrom_status = OK
 +
|Flashrom_comments = Supported flashrom revision 1010 or higher.
 +
}}

Revision as of 12:51, 28 January 2011

This page lists the coreboot status of the Nokia IP530 mainboard. It's maintained by Marc Bertens.


The Nokia IP330 is originally a Firewall that runs on the proprietary IPSO operating system of Nokia, it was based in the FreeBSD operating system. There is as far as I known no CD support in the orginal BIOS.

The System has no VGA, all console activity must be done through a serial console. At the front the following can be found;

  • Power LED
  • Fault LED
  • 2 Serial interfaces COM1 and COM2
  • 3 Ethernet RJ45 sockets
  • Reset button
  • 1 Compact PCI slot

At the back the following can be found;

  • EURO Power connector
  • Power switch
  • Three FANs for system unit cooling
  • One FAN for CPU cooling


Development status

The current development status is; No coreboot running yet


Hardware status

Device/functionality Status Comments
CPU
CPU works OK PIII SL5DV (1000 / 256 / 133 / 1.75V)
L1 cache enabled OK CPU: L1 I cache: 16K, L1 D cache: 16K
L2 cache enabled OK L2 cache is standard for the P3-68X models
L3 cache enabled N/A
Multiple CPU support N/A
Multi-core support N/A
Hardware virtualization N/A
RAM
EDO N/A
SDRAM OK upto 4 single sided 128Mb or 4 dual sided 256Mb
SO-DIMM N/A
DDR N/A
DDR2 N/A
DDR3 N/A
Dual channel support N/A
ECC support WIP Not yet supported by the coreboot 440BX code, but it's on our TODO list.
On-board Hardware
On-board IDE 3.5" OK Primary and secondary controllers, the primary controller has a Compact Flash slot attached on board, as primary drive.
On-board IDE 2.5" N/A
On-board SATA N/A
On-board SCSI N/A
On-board USB OK The USB is not routed to any connector, u can be picked up from the board it self, there is an instruction below on this wiki-page how to do this
On-board VGA N/A
On-board ethernet OK Four intel 21143PD controllers.
On-board audio N/A
On-board modem N/A
On-board FireWire N/A
On-board smartcard reader N/A
On-board CompactFlash OK Is wrired are primary drive on primary IDE controller.
On-board PCMCIA OK Texas Instruments PCI1225 PCMCIA/Cardbus controller
Add-on slots/cards
ISA add-on cards N/A
Audio/Modem-Riser (AMR/CNR) cards N/A
PCI add-on cards OK Tested: With 4 Ethernet adapter card of Nokia (Compact-PCI slots)
Mini-PCI add-on cards N/A
PCI-X add-on cards N/A
AGP graphics cards N/A
PCI Express x1 add-on cards N/A
PCI Express x2 add-on cards N/A
PCI Express x4 add-on cards N/A
PCI Express x8 add-on cards N/A
PCI Express x16 add-on cards N/A
PCI Express x32 add-on cards N/A
HTX add-on cards N/A
Legacy / Super I/O
Floppy N/A
Serial port 1 (COM1) OK
Serial port 2 (COM2) OK
Parallel port N/A
PS/2 keyboard OK Internal 4 pin connector J-KBD
PS/2 mouse N/A
Game port N/A
Infrared N/A
PC speaker N/A
DiskOnChip N/A
Miscellaneous
Sensors / fan control WIP
Hardware watchdog N/A
SMBus WIP
CAN bus N/A
CPU frequency scaling N/A
Other powersaving features N/A
ACPI No There's no ACPI implementation for this board, but it's on our TODO list.
Reboot N/A
Poweroff N/A
Suspend Unknown
Nonstandard LEDs OK Special-purpose LEDs available on the board, Alert and Fault are controlled by the superio
High precision event timers (HPET) N/A
Random number generator (RNG) N/A
Wake on modem ring N/A
Wake on LAN N/A
Wake on keyboard N/A
Wake on mouse N/A
Flashrom OK Supported flashrom revision 1010 or higher.