Difference between revisions of "Nvidia MCP55 Porting Notes"

From coreboot
Jump to: navigation, search
(Example Code for MPtable)
(Example ACPI static IRQ routing)
 
(2 intermediate revisions by one user not shown)
Line 1: Line 1:
 
== Interrupt Routing Registers ==
 
== Interrupt Routing Registers ==
 +
Please note that this is valid for [http://www.coreboot.org/Nvidia_CK804_Porting_Notes CK804] too.
  
 
'''Values for routing IRQ's:'''
 
'''Values for routing IRQ's:'''
Line 40: Line 41:
 
|}
 
|}
  
== Register ==
+
== Registers on M57SLI ==
 
Each line is 4 bits.
 
Each line is 4 bits.
 
{| border="0" style="font-size: smaller"
 
{| border="0" style="font-size: smaller"
Line 314: Line 315:
 
                                 })
 
                                 })
 
                         }
 
                         }
 +
== Thanks ... ==
 +
... go to Rudolf Marek who figured the informations out from the M57SLI's vendor dsdt.asl, and while he was doing this on a train his wallet was stolen.
 +
So please keep that informations careful, it's valuable. :)

Latest revision as of 09:34, 11 June 2009

Interrupt Routing Registers

Please note that this is valid for CK804 too.

Values for routing IRQ's:

Value APIC Pin (hex.) APIC Pin (dec.)
0x01 0x17 23
0x02 0x16 22
0x03 0x10 16
0x04 0x11 17
0x05 0x05 5
0x06 0x12 18
0x07 0x7 7
0x08 0x14 20
0x09 0x09 9
0x0A 0x0a 10
0x0B 0x0b 11
0x0C 0x13 19
0x0D 0x15 21
0x0E 0x0E 14
0x0F 0x0F 15

Registers on M57SLI

Each line is 4 bits.

0x7c 0x80 0x84
INTA SCII INTG
INTB TCOI INTH
INTC INTF INTJ
INTD INTQ INTK
PCEA INTU INTL
PCEB INTS INTM
PCEC IS0P INTN
PCED ITID ISA2

Wiring on M57SLI-S4

Device/Pin Routed to Pin Description
1/INTA INTF ISALPC
1/INTB INTS SMBus
2/INTA INTG Usb0
2/INTB INTQ Usb1
4/INTA INTN IDE
5/INTA ITID Sata1
5/INTB IS0P Sata2
5/INTC ISA2 Sata3
6/INTA INTU Bridge to Bus 1
6/INTB INTK Audio
8/INTA INTJ Ethernet

Bridges to the PCI-E Slots & Devices

Device/Pin Routed to Pin Description
F/INTA PCEB Bridge to Bus 7 - PCIE 16x (black)
F/INTB PCEC
F/INTC PCED
F/INTD PCEA
E/INTA PCEC Bridge to Bus 6
E/INTB PCED
E/INTC PCEA
E/INTD PCEB
D/INTA PCED Bridge to Bus 5
D/INTB PCEA
D/INTC PCEB
D/INTD PCEC
C/INTA PCEA Bridge to Bus 4
C/INTB PCEB
C/INTC PCEC
C/INTD PCED
B/INTA PCEB Bridge to Bus 3
B/INTB PCEC
B/INTC PCED
B/INTD PCEA
A/INTA PCEC Bridge to Bus 2 - PCIE 16x (blue)
A/INTB PCED
A/INTC PCEA
A/INTD PCEB

Bus 1 behind bridge from device 6

Device/Pin Routed to Pin Description
6/INTA INTC
6/INTB INTD
6/INTC INTA
6/INTD INTB
7/INTA INTD PCI Slot 1
7/INTB INTA
7/INTC INTB
7/INTD INTC
8/INTA INTA PCI Slot 2
8/INTB INTB
8/INTC INTC
8/INTD INTD
9/INTA INTB
9/INTB INTC
9/INTC INTD
9/INTD INTA
A/INTA INTC
A/INTB INTD
A/INTC INTA
A/INTD INTB

Example Code for MPtable

This source is to do a propper mptable setup on M57SLI.

Setup the registers 0x7c-0x84 with the IRQ Values you want to have:

 /*I/O APICs:    APIC ID Version State           Address*/
       {
               device_t dev;
               struct resource *res;
               uint32_t dword;
               dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
               if (dev) {
                       res = find_resource(dev, PCI_BASE_ADDRESS_1);
                       if (res) {
                               smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base);
                       }
                       dword = 0xc643c643;
                       pci_write_config32(dev, 0x7c, dword);
                       dword = 0x8da01009;
                       pci_write_config32(dev, 0x80, dword);
                       dword = 0x200018d2;
                       pci_write_config32(dev, 0x84, dword);
               }
       }

According to the Registers 0x7c-0x84 do the IRQ setup:

 #define PCI_INT(bus, dev, fn, pin)                                      \
       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,\
                        bus_mcp55[bus], (((dev)<<2)|(fn)), apicid_mcp55, (pin))
       PCI_INT(0,sbdn+1,1, 10); /* SMBus */
       PCI_INT(0,sbdn+2,0, 22); /* USB */
       PCI_INT(0,sbdn+2,1, 23); /* USB */
       PCI_INT(0,sbdn+4,0, 21); /* IDE */
       PCI_INT(0,sbdn+5,0, 20); /* SATA */
       PCI_INT(0,sbdn+5,1, 21); /* SATA */
       PCI_INT(0,sbdn+5,2, 22); /* SATA */
       PCI_INT(0,sbdn+6,1, 23); /* HD Audio */
       PCI_INT(0,sbdn+8,0, 20); /* GBit Ethernet */
       PCI_INT(1,0x0a,0, 18);   /* Firewire */
       /* The PCIe slots, each on its own bus */
       k = 1;
       for(i=0; i<=3; i++){
               for(j=7; j>=2; j--){
                       if(k>3) k=0;
                       PCI_INT(j,0,i, 16+k);
                       k++;
               }
               k--;
       }
       /* On bus 1: the PCI bus slots...  */
       k=2;
       for(i=0; i<=3; i++){
               for(j=6; j<=10; j++){
                       if(k>3) k=0;
                       PCI_INT(1,j,i, 16+k);
                       k++;
               }
       }

Example ACPI static IRQ routing

For this the registers 0x7c-0x84 need to be set so that this static routing will work.

                       /* PCI Routing Table */
                       Name (_PRT, Package () {
                               Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0A }, /* 0x1 - 00:01.1 - IRQ 10 - SMBus */
                               Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x16 }, /* 0x2 - 00:02.0 - IRQ 22 - USB */
                               Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x17 }, /* 0x2 - 00:01.1 - IRQ 23 - USB */
                               Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x15 }, /* 0x4 - 00:04.0 - IRQ 21 - IDE */
                               Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x14 }, /* 0x5 - 00:05.0 - IRQ 20 - SATA */
                               Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x15 }, /* 0x5 - 00:05.1 - IRQ 21 - SATA */
                               Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x16 }, /* 0x5 - 00:05.2 - IRQ 22 - SATA */
                               Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x17 }, /* 0x6 - 00:06.1 - IRQ 23 - HD Audio */
                               Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 }, /* 0x8 - 00:08.0 - IRQ 20 - GBit Ethernet */
                       })
                         Device (PEBA) /* PCI-E Bridge A */
                       {
                               Name (_ADR, 0x000A0000)
                               Name (_UID, 0x00)
                               Name (_BBN, 0x02)
                               Name (_Prt, Package () {
                                       Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 },
                                       Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 },
                                       Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 },
                                       Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 },
                                       })
                       }
                  

Bridge B-F needs also to get a routing setting, but not listed here.

  Device (PCID)   /* PCI Device */
                       {
                               Name (_ADR, 0x00060000)
                               Name (_UID, 0x00)
                               Name (_BBN, 0x01)
                               Name (_PRT, Package () {
                                       Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x12 },
                                       Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x13 },
                                       Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x10 },
                                       Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x11 },
                                       Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x13 },
                                       Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x10 },
                                       Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x11 },
                                       Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x12 },
                                       Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x10 },
                                       Package (0x04) { 0x0008FFFF, 0x01, 0x00, 0x11 },
                                       Package (0x04) { 0x0008FFFF, 0x02, 0x00, 0x12 },
                                       Package (0x04) { 0x0008FFFF, 0x03, 0x00, 0x13 },
                                       Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x11 },
                                       Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x12 },
                                       Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x13 },
                                       Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x10 },
                                       Package (0x04) { 0x000AFFFF, 0x00, 0x00, 0x12 }, /* FireWire */
                                       Package (0x04) { 0x000AFFFF, 0x01, 0x00, 0x13 },
                                       Package (0x04) { 0x000AFFFF, 0x02, 0x00, 0x10 },
                                       Package (0x04) { 0x000AFFFF, 0x03, 0x00, 0x11 },
                               })
                       }

Thanks ...

... go to Rudolf Marek who figured the informations out from the M57SLI's vendor dsdt.asl, and while he was doing this on a train his wallet was stolen. So please keep that informations careful, it's valuable. :)