Nvidia MCP55 Porting Notes: Difference between revisions

From coreboot
Jump to navigation Jump to search
No edit summary
Line 196: Line 196:
|- bgcolor="#eeeeee"
|- bgcolor="#eeeeee"
| A/INTD || INTB ||
| A/INTD || INTB ||
|}
== Example Code for MPtable ==
This source is to do a propper mptable setup on M57SLI.
'''Setup the registers 0x7c-0x84 with the IRQ Values you want to have:'''
  /*I/O APICs:    APIC ID Version State          Address*/
        {
                device_t dev;
                struct resource *res;
                uint32_t dword;
                dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
                if (dev) {
                        res = find_resource(dev, PCI_BASE_ADDRESS_1);
                        if (res) {
                                smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base);
                        }
                        dword = 0xc643c643;
                        pci_write_config32(dev, 0x7c, dword);
                        dword = 0x8da01009;
                        pci_write_config32(dev, 0x80, dword);
                        dword = 0x200018d2;
                        pci_write_config32(dev, 0x84, dword);
                }
        }
'''According to the Registers 0x7c-0x84 do the IRQ setup:'''
  #define PCI_INT(bus, dev, fn, pin)                                      \
        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,\
                        bus_mcp55[bus], (((dev)<<2)|(fn)), apicid_mcp55, (pin))
        PCI_INT(0,sbdn+1,1, 10); /* SMBus */
        PCI_INT(0,sbdn+2,0, 22); /* USB */
        PCI_INT(0,sbdn+2,1, 23); /* USB */
        PCI_INT(0,sbdn+4,0, 21); /* IDE */
        PCI_INT(0,sbdn+5,0, 20); /* SATA */
        PCI_INT(0,sbdn+5,1, 21); /* SATA */
        PCI_INT(0,sbdn+5,2, 22); /* SATA */
        PCI_INT(0,sbdn+6,1, 23); /* HD Audio */
        PCI_INT(0,sbdn+8,0, 20); /* GBit Ethernet */
        PCI_INT(1,0x0a,0, 18);  /* Firewire */
        /* The PCIe slots, each on its own bus */
        k = 1;
        for(i=0; i<=3; i++){
                for(j=7; j>=2; j--){
                        if(k>3) k=0;
                        PCI_INT(j,0,i, 16+k);
                        k++;
                }
                k--;
        }
        /* On bus 1: the PCI bus slots...  */
        k=2;
        for(i=0; i<=3; i++){
                for(j=6; j<=10; j++){
                        if(k>3) k=0;
                        PCI_INT(1,j,i, 16+k);
                        k++;
                }
        }

Revision as of 09:21, 11 June 2009

Interrupt Routing Registers

Values for routing IRQ's:

Value APIC Pin (hex.) APIC Pin (dec.)
0x01 0x17 23
0x02 0x16 22
0x03 0x10 16
0x04 0x11 17
0x05 0x05 5
0x06 0x12 18
0x07 0x7 7
0x08 0x14 20
0x09 0x09 9
0x0A 0x0a 10
0x0B 0x0b 11
0x0C 0x13 19
0x0D 0x15 21
0x0E 0x0E 14
0x0F 0x0F 15

Register

Each line is 4 bits.

0x7c 0x80 0x84
INTA SCII INTG
INTB TCOI INTH
INTC INTF INTJ
INTD INTQ INTK
PCEA INTU INTL
PCEB INTS INTM
PCEC IS0P INTN
PCED ITID ISA2

Wiring on M57SLI-S4

Device/Pin Routed to Pin Description
1/INTA INTF ISALPC
1/INTB INTS SMBus
2/INTA INTG Usb0
2/INTB INTQ Usb1
4/INTA INTN IDE
5/INTA ITID Sata1
5/INTB IS0P Sata2
5/INTC ISA2 Sata3
6/INTA INTU Bridge to Bus 1
6/INTB INTK Audio
8/INTA INTJ Ethernet

Bridges to the PCI-E Slots & Devices

Device/Pin Routed to Pin Description
F/INTA PCEB Bridge to Bus 7 - PCIE 16x (black)
F/INTB PCEC
F/INTC PCED
F/INTD PCEA
E/INTA PCEC Bridge to Bus 6
E/INTB PCED
E/INTC PCEA
E/INTD PCEB
D/INTA PCED Bridge to Bus 5
D/INTB PCEA
D/INTC PCEB
D/INTD PCEC
C/INTA PCEA Bridge to Bus 4
C/INTB PCEB
C/INTC PCEC
C/INTD PCED
B/INTA PCEB Bridge to Bus 3
B/INTB PCEC
B/INTC PCED
B/INTD PCEA
A/INTA PCEC Bridge to Bus 2 - PCIE 16x (blue)
A/INTB PCED
A/INTC PCEA
A/INTD PCEB

Bus 1 behind bridge from device 6

Device/Pin Routed to Pin Description
6/INTA INTC
6/INTB INTD
6/INTC INTA
6/INTD INTB
7/INTA INTD PCI Slot 1
7/INTB INTA
7/INTC INTB
7/INTD INTC
8/INTA INTA PCI Slot 2
8/INTB INTB
8/INTC INTC
8/INTD INTD
9/INTA INTB
9/INTB INTC
9/INTC INTD
9/INTD INTA
A/INTA INTC
A/INTB INTD
A/INTC INTA
A/INTD INTB

Example Code for MPtable

This source is to do a propper mptable setup on M57SLI.

Setup the registers 0x7c-0x84 with the IRQ Values you want to have:

 /*I/O APICs:    APIC ID Version State           Address*/
       {
               device_t dev;
               struct resource *res;
               uint32_t dword;
               dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
               if (dev) {
                       res = find_resource(dev, PCI_BASE_ADDRESS_1);
                       if (res) {
                               smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base);
                       }
                       dword = 0xc643c643;
                       pci_write_config32(dev, 0x7c, dword);
                       dword = 0x8da01009;
                       pci_write_config32(dev, 0x80, dword);
                       dword = 0x200018d2;
                       pci_write_config32(dev, 0x84, dword);
               }
       }

According to the Registers 0x7c-0x84 do the IRQ setup:

 #define PCI_INT(bus, dev, fn, pin)                                      \
       smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,\
                        bus_mcp55[bus], (((dev)<<2)|(fn)), apicid_mcp55, (pin))
       PCI_INT(0,sbdn+1,1, 10); /* SMBus */
       PCI_INT(0,sbdn+2,0, 22); /* USB */
       PCI_INT(0,sbdn+2,1, 23); /* USB */
       PCI_INT(0,sbdn+4,0, 21); /* IDE */
       PCI_INT(0,sbdn+5,0, 20); /* SATA */
       PCI_INT(0,sbdn+5,1, 21); /* SATA */
       PCI_INT(0,sbdn+5,2, 22); /* SATA */
       PCI_INT(0,sbdn+6,1, 23); /* HD Audio */
       PCI_INT(0,sbdn+8,0, 20); /* GBit Ethernet */
       PCI_INT(1,0x0a,0, 18);   /* Firewire */
       /* The PCIe slots, each on its own bus */
       k = 1;
       for(i=0; i<=3; i++){
               for(j=7; j>=2; j--){
                       if(k>3) k=0;
                       PCI_INT(j,0,i, 16+k);
                       k++;
               }
               k--;
       }
       /* On bus 1: the PCI bus slots...  */
       k=2;
       for(i=0; i<=3; i++){
               for(j=6; j<=10; j++){
                       if(k>3) k=0;
                       PCI_INT(1,j,i, 16+k);
                       k++;
               }
       }