Preparing your computer for coreboot

From coreboot
Revision as of 19:37, 23 June 2013 by GNUtoo (Talk | contribs)

Jump to: navigation, search

Introduction

In order to easier coreboot debugging(really usefull when something goes wrong) you should consider making your computer coreboot-ready before installing coreboot.

Steps

If you have a serial port, you should consider Enabling the Serial Console in:

  • Coreboot
  • The payload(if you use Seabios from coreboot's "make menuconfig" it's already done for you)
  • The bootloader like grub
  • The kernel(like the linux kernel)
  • The init system(systemd, sysvinit etc...)