Security

From coreboot
Revision as of 00:27, 17 January 2016 by GNUtoo (talk | contribs)
Jump to navigation Jump to search

The wiki is being retired!

Documentation is now handled by the same processes we use for code: Add something to the Documentation/ directory in the coreboot repo, and it will be rendered to https://doc.coreboot.org/. Contributions welcome!

This page explains how coreboot can help with various security aspects of your system, compared to closed-source, legacy BIOS/EFI/firmware implementations.

This page is work in progress!

Free software

Recently many security issues had to be fixed in the boot firmware. Examples can be found on the ChangeLogs blog articles. Fixes can take months before being available on non-free firwmares, if you are lucky enough to have them. With free software boot fimrwares, security issues can be fixed, and in coreboot many are.

Common security features

  • Boot password (like BIOS password)
  • Signature verification - option to boot from payload only signed images

Bayou / coreinfo / GRUB2 have "BIOS password"-like feature, using SHA-1 hashes stored in NVRAM or the (flash) ROM chip. GRUB2 can also do signature verification of on-disk operating systems. TianoCore could probably be adapted to support either, too.

Both features are in the payload domain since coreboot doesn't provide a user interface.

  • RAM wiping after each boot

This is not very useful: The most interesting time would be right before power-off, which could be implemented in SMM. Unfortunately a cautious attacker just pulls the plug.


To prevent reading data after a reboot, a payload could be adapted to clean out memory. Using applications that manage sensible data sensibly (ie. wipe after use) is still a better solution.

  • Support booting from encrypted block devices/volumes

GRUB2 can do that.

Current BIOS issues

RAM wiping

SMI issues

ATA issues

Firewire issues

TPM issues