Difference between revisions of "Shuttle SN25P Build Tutorial/Infos"

From coreboot
Jump to: navigation, search
m (setpci)
m (lspci -vvvxx)
Line 50: Line 50:
  
 
== lspci -vvvxx ==
 
== lspci -vvvxx ==
 +
 +
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
 +
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
 +
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0
 +
Capabilities: [44] HyperTransport: Slave or Primary Interface
 +
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
 +
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
 +
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
 +
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
 +
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
 +
Revision ID: 1.03
 +
Link Frequency 0: 1.0GHz
 +
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
 +
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
 +
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
 +
Link Frequency 1: 200MHz
 +
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
 +
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
 +
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
 +
Prefetchable memory behind bridge Upper: 00-00
 +
Bus Number: 00
 +
Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
 +
Mapping Address Base: 00000000fee00000
 +
00: de 10 5e 00 06 00 b0 00 a3 00 80 05 00 00 00 00
 +
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
 +
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
 +
 +
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
 +
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0
 +
00: de 10 50 00 0f 00 a0 00 a3 00 01 06 00 00 80 00
 +
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
 +
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
 +
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
 +
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
 +
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Interrupt: pin A routed to IRQ 12
 +
Region 0: I/O ports at dc00 [size=32]
 +
Region 4: I/O ports at 1c00 [size=64]
 +
Region 5: I/O ports at 1c40 [size=64]
 +
Capabilities: [44] Power Management version 2
 +
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Kernel driver in use: nForce2_smbus
 +
00: de 10 52 00 01 00 b0 00 a2 00 05 0c 00 00 80 00
 +
10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
20: 01 1c 00 00 41 1c 00 00 00 00 00 00 97 12 36 50
 +
30: 00 00 00 00 44 00 00 00 00 00 00 00 0c 01 03 01
 +
 +
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
 +
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0 (750ns min, 250ns max)
 +
Interrupt: pin A routed to IRQ 11
 +
Region 0: Memory at d0203000 (32-bit, non-prefetchable) [size=4K]
 +
Capabilities: [44] Power Management version 2
 +
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Kernel driver in use: ohci_hcd
 +
00: de 10 5a 00 07 00 b0 00 a2 10 03 0c 00 00 80 00
 +
10: 00 30 20 d0 00 00 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
 +
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
 +
 +
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI])
 +
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
 +
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0 (750ns min, 250ns max)
 +
Interrupt: pin B routed to IRQ 10
 +
Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=256]
 +
Capabilities: [44] Debug port: BAR=1 offset=0098
 +
Capabilities: [80] Power Management version 2
 +
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Kernel driver in use: ehci_hcd
 +
00: de 10 5b 00 06 00 b0 00 a3 20 03 0c 00 00 80 00
 +
10: 00 00 b0 fe 00 00 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
 +
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01
 +
 +
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP])
 +
Subsystem: Device f297:5036
 +
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0 (750ns min, 250ns max)
 +
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
 +
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
 +
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
 +
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
 +
Region 4: I/O ports at f000 [size=16]
 +
Capabilities: [44] Power Management version 2
 +
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Kernel driver in use: pata_amd
 +
00: de 10 53 00 05 00 b0 00 f2 8a 01 01 00 00 00 00
 +
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
20: 01 f0 00 00 00 00 00 00 00 00 00 00 97 f2 36 50
 +
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
 +
 +
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
 +
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0 (750ns min, 250ns max)
 +
Interrupt: pin A routed to IRQ 11
 +
Region 0: I/O ports at 09f0 [size=8]
 +
Region 1: I/O ports at 0bf0 [size=4]
 +
Region 2: I/O ports at 0970 [size=8]
 +
Region 3: I/O ports at 0b70 [size=4]
 +
Region 4: I/O ports at d800 [size=16]
 +
Region 5: Memory at d0202000 (32-bit, non-prefetchable) [size=4K]
 +
Capabilities: [44] Power Management version 2
 +
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Kernel driver in use: sata_nv
 +
00: de 10 54 00 07 00 b0 00 f3 85 01 01 00 00 00 00
 +
10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00
 +
20: 01 d8 00 00 00 20 20 d0 00 00 00 00 97 12 36 50
 +
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01
 +
 +
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
 +
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0 (750ns min, 250ns max)
 +
Interrupt: pin A routed to IRQ 10
 +
Region 0: I/O ports at 09e0 [size=8]
 +
Region 1: I/O ports at 0be0 [size=4]
 +
Region 2: I/O ports at 0960 [size=8]
 +
Region 3: I/O ports at 0b60 [size=4]
 +
Region 4: I/O ports at c400 [size=16]
 +
Region 5: Memory at d0201000 (32-bit, non-prefetchable) [size=4K]
 +
Capabilities: [44] Power Management version 2
 +
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Kernel driver in use: sata_nv
 +
00: de 10 55 00 07 00 b0 00 f3 85 01 01 00 00 00 00
 +
10: e1 09 00 00 e1 0b 00 00 61 09 00 00 61 0b 00 00
 +
20: 01 c4 00 00 00 10 20 d0 00 00 00 00 97 12 36 50
 +
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
 +
 +
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 +
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0
 +
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
 +
I/O behind bridge: 0000a000-0000afff
 +
Memory behind bridge: d0100000-d01fffff
 +
Prefetchable memory behind bridge: fff00000-000fffff
 +
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 +
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
 +
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
 +
00: de 10 5c 00 07 01 a0 00 a2 01 04 06 00 00 01 00
 +
10: 00 00 00 00 00 00 00 00 00 05 05 20 a0 a0 80 22
 +
20: 10 d0 10 d0 f0 ff 00 00 00 00 00 00 00 00 00 00
 +
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 02
 +
 +
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
 +
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0 (250ns min, 5000ns max)
 +
Interrupt: pin A routed to IRQ 3
 +
Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=4K]
 +
Region 1: I/O ports at b000 [size=8]
 +
Capabilities: [44] Power Management version 2
 +
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
 +
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
 +
Kernel driver in use: forcedeth
 +
00: de 10 57 00 07 00 b0 00 a3 00 80 06 00 00 00 00
 +
10: 00 00 20 d0 01 b0 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
 +
30: 00 00 00 00 44 00 00 00 00 00 00 00 03 01 01 14
 +
 +
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0, Cache Line Size: 32 bytes
 +
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
 +
I/O behind bridge: 0000f000-00000fff
 +
Memory behind bridge: fff00000-000fffff
 +
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
 +
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 +
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
 +
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 +
Capabilities: [40] Power Management version 2
 +
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
 +
Address: 00000000fee0100c  Data: 4149
 +
Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
 +
Mapping Address Base: 00000000fee00000
 +
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
 +
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
 +
ExtTag- RBE- FLReset-
 +
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
 +
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
 +
MaxPayload 128 bytes, MaxReadReq 512 bytes
 +
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 +
LnkCap: Port #3, Speed 2.5GT/s, Width x2, ASPM L0s, Latency L0 <512ns, L1 <4us
 +
ClockPM- Suprise- LLActRep- BwNot-
 +
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
 +
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 +
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 +
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
 +
Slot #  8, PowerLimit 25.000000; Interlock- NoCompl-
 +
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 +
Control: AttnInd Off, PwrInd On, Power- Interlock-
 +
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
 +
Changed: MRL- PresDet- LinkState-
 +
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
 +
RootCap: CRSVisible-
 +
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 +
Kernel driver in use: pcieport-driver
 +
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
 +
10: 00 00 00 00 00 00 00 00 00 04 04 00 f1 01 00 00
 +
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
 +
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 06 00
 +
 +
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0, Cache Line Size: 32 bytes
 +
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
 +
I/O behind bridge: 0000f000-00000fff
 +
Memory behind bridge: fff00000-000fffff
 +
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
 +
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 +
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
 +
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 +
Capabilities: [40] Power Management version 2
 +
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
 +
Address: 00000000fee0100c  Data: 4151
 +
Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
 +
Mapping Address Base: 00000000fee00000
 +
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
 +
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
 +
ExtTag- RBE- FLReset-
 +
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
 +
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
 +
MaxPayload 128 bytes, MaxReadReq 512 bytes
 +
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 +
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <512ns, L1 <4us
 +
ClockPM- Suprise- LLActRep- BwNot-
 +
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
 +
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 +
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 +
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
 +
Slot #  4, PowerLimit 10.000000; Interlock- NoCompl-
 +
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 +
Control: AttnInd Off, PwrInd On, Power- Interlock-
 +
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
 +
Changed: MRL- PresDet- LinkState-
 +
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
 +
RootCap: CRSVisible-
 +
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 +
Kernel driver in use: pcieport-driver
 +
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
 +
10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 00
 +
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
 +
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 06 00
 +
 +
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0, Cache Line Size: 32 bytes
 +
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 +
I/O behind bridge: 0000f000-00000fff
 +
Memory behind bridge: d0000000-d00fffff
 +
Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
 +
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 +
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
 +
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 +
Capabilities: [40] Power Management version 2
 +
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
 +
Address: 00000000fee0100c  Data: 4159
 +
Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
 +
Mapping Address Base: 00000000fee00000
 +
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
 +
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
 +
ExtTag- RBE- FLReset-
 +
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
 +
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
 +
MaxPayload 128 bytes, MaxReadReq 512 bytes
 +
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 +
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <512ns, L1 <4us
 +
ClockPM- Suprise- LLActRep- BwNot-
 +
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
 +
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 +
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 +
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
 +
Slot #  2, PowerLimit 10.000000; Interlock- NoCompl-
 +
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 +
Control: AttnInd Off, PwrInd On, Power- Interlock-
 +
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 +
Changed: MRL- PresDet- LinkState-
 +
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
 +
RootCap: CRSVisible-
 +
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 +
Kernel driver in use: pcieport-driver
 +
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
 +
10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 20
 +
20: 00 d0 00 d0 01 88 01 88 00 00 00 00 00 00 00 00
 +
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 06 00
 +
 +
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0, Cache Line Size: 32 bytes
 +
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 +
I/O behind bridge: 00009000-00009fff
 +
Memory behind bridge: b0000000-cfffffff
 +
Prefetchable memory behind bridge: 0000000088100000-00000000881fffff
 +
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 +
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
 +
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 +
Capabilities: [40] Power Management version 2
 +
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
 +
Address: 00000000fee0100c  Data: 4161
 +
Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
 +
Mapping Address Base: 00000000fee00000
 +
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
 +
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
 +
ExtTag- RBE- FLReset-
 +
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
 +
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
 +
MaxPayload 128 bytes, MaxReadReq 512 bytes
 +
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 +
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <512ns, L1 <4us
 +
ClockPM- Suprise- LLActRep- BwNot-
 +
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
 +
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 +
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 +
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
 +
Slot #  1, PowerLimit 75.000000; Interlock- NoCompl-
 +
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 +
Control: AttnInd Off, PwrInd On, Power- Interlock-
 +
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 +
Changed: MRL- PresDet- LinkState-
 +
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
 +
RootCap: CRSVisible-
 +
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 +
Kernel driver in use: pcieport-driver
 +
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
 +
10: 00 00 00 00 00 00 00 00 00 01 01 00 91 91 00 00
 +
20: 00 b0 f0 cf 11 88 11 88 00 00 00 00 00 00 00 00
 +
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 0e 00
 +
 +
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
 +
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Capabilities: [80] HyperTransport: Host or Secondary Interface
 +
!!! Possibly incomplete decoding
 +
Command: WarmRst+ DblEnd-
 +
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
 +
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
 +
Revision ID: 1.02
 +
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
 +
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
 +
 +
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
 +
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
 +
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
 +
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
 +
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
 +
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
 +
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
 +
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Kernel driver in use: k8temp
 +
00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
 +
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 +
 +
01:00.0 VGA compatible controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) (prog-if 00 [VGA controller])
 +
Subsystem: ABIT Computer Corp. Device 0016
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0, Cache Line Size: 32 bytes
 +
Interrupt: pin A routed to IRQ 5
 +
Region 0: Memory at b0000000 (64-bit, prefetchable) [size=256M]
 +
Region 2: Memory at c0030000 (64-bit, non-prefetchable) [size=64K]
 +
Region 4: I/O ports at 9000 [size=256]
 +
[virtual] Expansion ROM at 88100000 [disabled] [size=128K]
 +
Capabilities: [50] Power Management version 2
 +
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Capabilities: [58] Express (v1) Endpoint, MSI 00
 +
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
 +
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
 +
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 +
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
 +
MaxPayload 128 bytes, MaxReadReq 128 bytes
 +
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 +
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us
 +
ClockPM- Suprise- LLActRep- BwNot-
 +
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
 +
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 +
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 +
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
 +
Address: 0000000000000000  Data: 0000
 +
00: 02 10 4d 55 07 00 10 00 00 00 00 03 08 00 80 00
 +
10: 0c 00 00 b0 00 00 00 00 04 00 03 c0 00 00 00 00
 +
20: 01 90 00 00 00 00 00 00 00 00 00 00 7b 14 16 00
 +
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00
 +
 +
01:00.1 Display controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) (Secondary)
 +
Subsystem: ABIT Computer Corp. Device 0017
 +
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Region 0: Memory at c0020000 (64-bit, non-prefetchable) [disabled] [size=64K]
 +
Capabilities: [50] Power Management version 2
 +
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Capabilities: [58] Express (v1) Endpoint, MSI 00
 +
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
 +
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
 +
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 +
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
 +
MaxPayload 128 bytes, MaxReadReq 128 bytes
 +
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 +
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us
 +
ClockPM- Suprise- LLActRep- BwNot-
 +
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
 +
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 +
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 +
00: 02 10 6d 55 00 00 10 00 00 00 80 03 08 00 00 00
 +
10: 04 00 02 c0 00 00 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 17 00
 +
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00
 +
 +
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 21)
 +
Subsystem: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express
 +
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 0, Cache Line Size: 32 bytes
 +
Interrupt: pin A routed to IRQ 283
 +
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
 +
[virtual] Expansion ROM at 88000000 [disabled] [size=64K]
 +
Capabilities: [48] Power Management version 2
 +
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
 +
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
 +
Capabilities: [50] Vital Product Data <?>
 +
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
 +
Address: 00000000fee0100c  Data: 4169
 +
Capabilities: [d0] Express (v1) Endpoint, MSI 00
 +
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
 +
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
 +
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 +
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
 +
MaxPayload 128 bytes, MaxReadReq 4096 bytes
 +
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 +
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
 +
ClockPM- Suprise- LLActRep- BwNot-
 +
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
 +
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 +
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 +
Kernel driver in use: tg3
 +
00: e4 14 77 16 06 04 10 00 21 00 00 02 08 00 00 00
 +
10: 04 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 07 00 00 00 e4 14 77 16
 +
30: 00 00 00 00 48 00 00 00 00 00 00 00 0c 01 00 00
 +
 +
05:06.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01)
 +
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
 +
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 32
 +
Interrupt: pin A routed to IRQ 5
 +
Region 0: I/O ports at a000 [size=32]
 +
Region 1: I/O ports at a400 [size=128]
 +
Capabilities: [80] Power Management version 1
 +
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Kernel driver in use: ICE1724
 +
00: 12 14 24 17 05 00 10 02 01 00 01 04 00 20 00 00
 +
10: 01 a0 00 00 01 a4 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
 +
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 00 00
 +
 +
05:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
 +
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
 +
Interrupt: pin A routed to IRQ 12
 +
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=2K]
 +
Region 1: I/O ports at a800 [size=128]
 +
Capabilities: [50] Power Management version 2
 +
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
 +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
Kernel driver in use: ohci1394
 +
00: 06 11 44 30 07 00 10 02 80 10 00 0c 08 20 00 00
 +
10: 00 00 10 d0 01 a8 00 00 00 00 00 00 00 00 00 00
 +
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 44 30
 +
30: 00 00 00 00 50 00 00 00 00 00 00 00 0c 01 00 20
 +
 
== setpci ==
 
== setpci ==
 
* setpci -s 0:0:1.0 7c.L
 
* setpci -s 0:0:1.0 7c.L

Revision as of 20:05, 9 September 2008

/proc/interrupts

           CPU0
  0:        136   IO-APIC-edge      timer
  1:         12   IO-APIC-edge      i8042
  2:          0    XT-PIC-XT        cascade
  3:     280708   IO-APIC-fasteoi   eth1
  4:        292   IO-APIC-edge
  5:          0   IO-APIC-fasteoi   ICE1724
  7:          1   IO-APIC-edge
  8:          0   IO-APIC-edge      rtc0
 10:          2   IO-APIC-fasteoi   sata_nv, ehci_hcd:usb1
 11:         23   IO-APIC-fasteoi   sata_nv, ohci_hcd:usb2
 12:          2   IO-APIC-fasteoi   ohci1394
 14:       1933   IO-APIC-edge      pata_amd
 15:          0   IO-APIC-edge      pata_amd
283:          6   PCI-MSI-edge      eth0
NMI:          0   Non-maskable interrupts
LOC:    2809174   Local timer interrupts
TRM:          0   Thermal event interrupts
THR:          0   Threshold APIC interrupts
SPU:          0   Spurious interrupts
ERR:          1

getpir

mptable

superiotool -dV

flashrom -V

lspci -tnvv

-[0000:00]-+-00.0  10de:005e
           +-01.0  10de:0050
           +-01.1  10de:0052
           +-02.0  10de:005a
           +-02.1  10de:005b
           +-06.0  10de:0053
           +-07.0  10de:0054
           +-08.0  10de:0055
           +-09.0-[0000:05]--+-06.0  1412:1724
           |                 \-07.0  1106:3044
           +-0a.0  10de:0057
           +-0b.0-[0000:04]--
           +-0c.0-[0000:03]--
           +-0d.0-[0000:02]----00.0  14e4:1677
           +-0e.0-[0000:01]--+-00.0  1002:554d
           |                 \-00.1  1002:556d
           +-18.0  1022:1100
           +-18.1  1022:1101
           +-18.2  1022:1102
           \-18.3  1022:1103

lspci -vvvxx

00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [44] HyperTransport: Slave or Primary Interface
		Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
		Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
		Revision ID: 1.03
		Link Frequency 0: 1.0GHz
		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
		Link Frequency 1: 200MHz
		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
		Prefetchable memory behind bridge Upper: 00-00
		Bus Number: 00
	Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
00: de 10 5e 00 06 00 b0 00 a3 00 80 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00

00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
00: de 10 50 00 0f 00 a0 00 a3 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 12
	Region 0: I/O ports at dc00 [size=32]
	Region 4: I/O ports at 1c00 [size=64]
	Region 5: I/O ports at 1c40 [size=64]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: nForce2_smbus
00: de 10 52 00 01 00 b0 00 a2 00 05 0c 00 00 80 00
10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 1c 00 00 41 1c 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0c 01 03 01

00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d0203000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ohci_hcd
00: de 10 5a 00 07 00 b0 00 a2 10 03 0c 00 00 80 00
10: 00 30 20 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01

00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Debug port: BAR=1 offset=0098
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ehci_hcd
00: de 10 5b 00 06 00 b0 00 a3 20 03 0c 00 00 80 00
10: 00 00 b0 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01

00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP])
	Subsystem: Device f297:5036
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at f000 [size=16]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pata_amd
00: de 10 53 00 05 00 b0 00 f2 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 97 f2 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01

00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 09f0 [size=8]
	Region 1: I/O ports at 0bf0 [size=4]
	Region 2: I/O ports at 0970 [size=8]
	Region 3: I/O ports at 0b70 [size=4]
	Region 4: I/O ports at d800 [size=16]
	Region 5: Memory at d0202000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: sata_nv
00: de 10 54 00 07 00 b0 00 f3 85 01 01 00 00 00 00
10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00
20: 01 d8 00 00 00 20 20 d0 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01

00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at 09e0 [size=8]
	Region 1: I/O ports at 0be0 [size=4]
	Region 2: I/O ports at 0960 [size=8]
	Region 3: I/O ports at 0b60 [size=4]
	Region 4: I/O ports at c400 [size=16]
	Region 5: Memory at d0201000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: sata_nv
00: de 10 55 00 07 00 b0 00 f3 85 01 01 00 00 00 00
10: e1 09 00 00 e1 0b 00 00 61 09 00 00 61 0b 00 00
20: 01 c4 00 00 00 10 20 d0 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01

00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: d0100000-d01fffff
	Prefetchable memory behind bridge: fff00000-000fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00: de 10 5c 00 07 01 a0 00 a2 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 20 a0 a0 80 22
20: 10 d0 10 d0 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 02

00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 3
	Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at b000 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
	Kernel driver in use: forcedeth
00: de 10 57 00 07 00 b0 00 a3 00 80 06 00 00 00 00
10: 00 00 20 d0 01 b0 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 03 01 01 14

00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0100c  Data: 4149
	Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
			ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #3, Speed 2.5GT/s, Width x2, ASPM L0s, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  8, PowerLimit 25.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Kernel driver in use: pcieport-driver
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 06 00

00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0100c  Data: 4151
	Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
			ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  4, PowerLimit 10.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Kernel driver in use: pcieport-driver
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 06 00

00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: d0000000-d00fffff
	Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0100c  Data: 4159
	Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
			ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  2, PowerLimit 10.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Kernel driver in use: pcieport-driver
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 20
20: 00 d0 00 d0 01 88 01 88 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 06 00

00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: b0000000-cfffffff
	Prefetchable memory behind bridge: 0000000088100000-00000000881fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0100c  Data: 4161
	Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
			ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  1, PowerLimit 75.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Kernel driver in use: pcieport-driver
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 91 91 00 00
20: 00 b0 f0 cf 11 88 11 88 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 0e 00

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [80] HyperTransport: Host or Secondary Interface
		!!! Possibly incomplete decoding
		Command: WarmRst+ DblEnd-
		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
		Revision ID: 1.02
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: k8temp
00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 VGA compatible controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) (prog-if 00 [VGA controller])
	Subsystem: ABIT Computer Corp. Device 0016
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at b0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at c0030000 (64-bit, non-prefetchable) [size=64K]
	Region 4: I/O ports at 9000 [size=256]
	[virtual] Expansion ROM at 88100000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
00: 02 10 4d 55 07 00 10 00 00 00 00 03 08 00 80 00
10: 0c 00 00 b0 00 00 00 00 04 00 03 c0 00 00 00 00
20: 01 90 00 00 00 00 00 00 00 00 00 00 7b 14 16 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00

01:00.1 Display controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) (Secondary)
	Subsystem: ABIT Computer Corp. Device 0017
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: Memory at c0020000 (64-bit, non-prefetchable) [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
00: 02 10 6d 55 00 00 10 00 00 00 80 03 08 00 00 00
10: 04 00 02 c0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 17 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 21)
	Subsystem: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 283
	Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at 88000000 [disabled] [size=64K]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data <?>
	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
		Address: 00000000fee0100c  Data: 4169
	Capabilities: [d0] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 4096 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Kernel driver in use: tg3
00: e4 14 77 16 06 04 10 00 21 00 00 02 08 00 00 00
10: 04 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 07 00 00 00 e4 14 77 16
30: 00 00 00 00 48 00 00 00 00 00 00 00 0c 01 00 00

05:06.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at a000 [size=32]
	Region 1: I/O ports at a400 [size=128]
	Capabilities: [80] Power Management version 1
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ICE1724
00: 12 14 24 17 05 00 10 02 01 00 01 04 00 20 00 00
10: 01 a0 00 00 01 a4 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 00 00

05:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
	Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (8000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 12
	Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=2K]
	Region 1: I/O ports at a800 [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ohci1394
00: 06 11 44 30 07 00 10 02 80 10 00 0c 08 20 00 00
10: 00 00 10 d0 01 a8 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 44 30
30: 00 00 00 00 50 00 00 00 00 00 00 00 0c 01 00 20

setpci

  • setpci -s 0:0:1.0 7c.L
0ab0c500
  • setpci -s 0:0:1.0 80.L
ab00ac09
  • setpci -s 0:0:1.0 84.L
0000030b

dmidecode