Shuttle SN25P Build Tutorial/Infos

From coreboot
Revision as of 20:06, 9 September 2008 by Vince (talk | contribs) (→‎flashrom -V)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

The wiki is being retired!

Documentation is now handled by the same processes we use for code: Add something to the Documentation/ directory in the coreboot repo, and it will be rendered to https://doc.coreboot.org/. Contributions welcome!

/proc/interrupts

           CPU0
  0:        136   IO-APIC-edge      timer
  1:         12   IO-APIC-edge      i8042
  2:          0    XT-PIC-XT        cascade
  3:     280708   IO-APIC-fasteoi   eth1
  4:        292   IO-APIC-edge
  5:          0   IO-APIC-fasteoi   ICE1724
  7:          1   IO-APIC-edge
  8:          0   IO-APIC-edge      rtc0
 10:          2   IO-APIC-fasteoi   sata_nv, ehci_hcd:usb1
 11:         23   IO-APIC-fasteoi   sata_nv, ohci_hcd:usb2
 12:          2   IO-APIC-fasteoi   ohci1394
 14:       1933   IO-APIC-edge      pata_amd
 15:          0   IO-APIC-edge      pata_amd
283:          6   PCI-MSI-edge      eth0
NMI:          0   Non-maskable interrupts
LOC:    2809174   Local timer interrupts
TRM:          0   Thermal event interrupts
THR:          0   Threshold APIC interrupts
SPU:          0   Spurious interrupts
ERR:          1

getpir

mptable

superiotool -dV

flashrom -V

Calibrating delay loop... 903M loops per second. OK.
No coreboot table found.
Found chipset "NVIDIA CK804", enabling flash write... OK.
Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d
Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d
Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Atmel AT25DF321, 4096 KB: spi_command called, but no SPI chipset/strapping detected
Probing for AMIC A25L40P, 512 KB: 4b ID not supported on this SPI controller
Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x9d, id2 0x6e
Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x9d, id2 0x6e
Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d
Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x49, id2 0x44
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x49, id2 0x4d
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Macronix MX25L4005, 512 KB: spi_command called, but no SPI chipset/strapping detected
Probing for Macronix MX25L8005, 1024 KB: spi_command called, but no SPI chipset/strapping detected
Probing for Macronix MX25L1605, 2048 KB: spi_command called, but no SPI chipset/strapping detected
Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI chipset/strapping detected
Probing for Macronix MX29F002, 256 KB: probe_29f002: id1 0x9d, id2 0x6e
Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI chipset/strapping detected
Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI chipset/strapping detected
Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI chipset/strapping detected
Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI chipset/strapping detected
Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI chipset/strapping detected
Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI chipset/strapping detected
Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Found chip "PMC Pm49FL004" (512 KB) at physical address 0xfff80000.
Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff
Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI chipset/strapping detected
Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI chipset/strapping detected
Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI chipset/strapping detected
Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x49, id2 0x4d
Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x49, id2 0x4d
Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI chipset/strapping detected
Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI chipset/strapping detected
Probing for ST M25P20, 256 KB: spi_command called, but no SPI chipset/strapping detected
Probing for ST M25P40, 512 KB: spi_command called, but no SPI chipset/strapping detected
Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI chipset/strapping detected
Probing for ST M25P80, 1024 KB: spi_command called, but no SPI chipset/strapping detected
Probing for ST M25P16, 2048 KB: spi_command called, but no SPI chipset/strapping detected
Probing for ST M25P32, 4096 KB: spi_command called, but no SPI chipset/strapping detected
Probing for ST M25P64, 8192 KB: spi_command called, but no SPI chipset/strapping detected
Probing for ST M25P128, 16384 KB: spi_command called, but no SPI chipset/strapping detected
Probing for ST M29F002B, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x49, id2 0x44
Probing for ST M29W010B, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for ST M29W040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e
Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e
Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x49, id2 0x4d
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W25x10, 128 KB: spi_command called, but no SPI chipset/strapping detected
Probing for Winbond W25x20, 256 KB: spi_command called, but no SPI chipset/strapping detected
Probing for Winbond W25x40, 512 KB: spi_command called, but no SPI chipset/strapping detected
Probing for Winbond W25x80, 1024 KB: spi_command called, but no SPI chipset/strapping detected
Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W29EE011, 128 KB: 
===
  Probing disabled for Winbond W29EE011 because the probing sequence puts the
  AMIC A49LF040A in a funky state.
  Use 'flashrom -c W29EE011' if you have a board with this chip.
===
Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x9d, id2 0x6e
Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0xff, did 0xff
Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0x9d, did 0x6e
Probing for EON unknown EON SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected
Probing for Macronix unknown Macronix SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected
Probing for PMC unknown PMC SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected
Probing for SST unknown SST SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected
Probing for ST unknown ST SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected
No operations were specified.

lspci -tnvv

-[0000:00]-+-00.0  10de:005e
           +-01.0  10de:0050
           +-01.1  10de:0052
           +-02.0  10de:005a
           +-02.1  10de:005b
           +-06.0  10de:0053
           +-07.0  10de:0054
           +-08.0  10de:0055
           +-09.0-[0000:05]--+-06.0  1412:1724
           |                 \-07.0  1106:3044
           +-0a.0  10de:0057
           +-0b.0-[0000:04]--
           +-0c.0-[0000:03]--
           +-0d.0-[0000:02]----00.0  14e4:1677
           +-0e.0-[0000:01]--+-00.0  1002:554d
           |                 \-00.1  1002:556d
           +-18.0  1022:1100
           +-18.1  1022:1101
           +-18.2  1022:1102
           \-18.3  1022:1103

lspci -vvvxx

00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [44] HyperTransport: Slave or Primary Interface
		Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
		Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
		Revision ID: 1.03
		Link Frequency 0: 1.0GHz
		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
		Link Frequency 1: 200MHz
		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
		Prefetchable memory behind bridge Upper: 00-00
		Bus Number: 00
	Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
00: de 10 5e 00 06 00 b0 00 a3 00 80 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00

00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
00: de 10 50 00 0f 00 a0 00 a3 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 12
	Region 0: I/O ports at dc00 [size=32]
	Region 4: I/O ports at 1c00 [size=64]
	Region 5: I/O ports at 1c40 [size=64]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: nForce2_smbus
00: de 10 52 00 01 00 b0 00 a2 00 05 0c 00 00 80 00
10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 1c 00 00 41 1c 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0c 01 03 01

00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d0203000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ohci_hcd
00: de 10 5a 00 07 00 b0 00 a2 10 03 0c 00 00 80 00
10: 00 30 20 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01

00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Debug port: BAR=1 offset=0098
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ehci_hcd
00: de 10 5b 00 06 00 b0 00 a3 20 03 0c 00 00 80 00
10: 00 00 b0 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01

00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP])
	Subsystem: Device f297:5036
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at f000 [size=16]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pata_amd
00: de 10 53 00 05 00 b0 00 f2 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 97 f2 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01

00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 09f0 [size=8]
	Region 1: I/O ports at 0bf0 [size=4]
	Region 2: I/O ports at 0970 [size=8]
	Region 3: I/O ports at 0b70 [size=4]
	Region 4: I/O ports at d800 [size=16]
	Region 5: Memory at d0202000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: sata_nv
00: de 10 54 00 07 00 b0 00 f3 85 01 01 00 00 00 00
10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00
20: 01 d8 00 00 00 20 20 d0 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01

00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at 09e0 [size=8]
	Region 1: I/O ports at 0be0 [size=4]
	Region 2: I/O ports at 0960 [size=8]
	Region 3: I/O ports at 0b60 [size=4]
	Region 4: I/O ports at c400 [size=16]
	Region 5: Memory at d0201000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: sata_nv
00: de 10 55 00 07 00 b0 00 f3 85 01 01 00 00 00 00
10: e1 09 00 00 e1 0b 00 00 61 09 00 00 61 0b 00 00
20: 01 c4 00 00 00 10 20 d0 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01

00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: d0100000-d01fffff
	Prefetchable memory behind bridge: fff00000-000fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00: de 10 5c 00 07 01 a0 00 a2 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 20 a0 a0 80 22
20: 10 d0 10 d0 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 02

00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 3
	Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at b000 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
	Kernel driver in use: forcedeth
00: de 10 57 00 07 00 b0 00 a3 00 80 06 00 00 00 00
10: 00 00 20 d0 01 b0 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 03 01 01 14

00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0100c  Data: 4149
	Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
			ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #3, Speed 2.5GT/s, Width x2, ASPM L0s, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  8, PowerLimit 25.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Kernel driver in use: pcieport-driver
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 06 00

00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0100c  Data: 4151
	Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
			ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  4, PowerLimit 10.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Kernel driver in use: pcieport-driver
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 06 00

00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: d0000000-d00fffff
	Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0100c  Data: 4159
	Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
			ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  2, PowerLimit 10.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Kernel driver in use: pcieport-driver
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 20
20: 00 d0 00 d0 01 88 01 88 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 06 00

00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: b0000000-cfffffff
	Prefetchable memory behind bridge: 0000000088100000-00000000881fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
		Address: 00000000fee0100c  Data: 4161
	Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
			ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  1, PowerLimit 75.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Kernel driver in use: pcieport-driver
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 91 91 00 00
20: 00 b0 f0 cf 11 88 11 88 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 0e 00

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [80] HyperTransport: Host or Secondary Interface
		!!! Possibly incomplete decoding
		Command: WarmRst+ DblEnd-
		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
		Revision ID: 1.02
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: k8temp
00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 VGA compatible controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) (prog-if 00 [VGA controller])
	Subsystem: ABIT Computer Corp. Device 0016
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at b0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at c0030000 (64-bit, non-prefetchable) [size=64K]
	Region 4: I/O ports at 9000 [size=256]
	[virtual] Expansion ROM at 88100000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
00: 02 10 4d 55 07 00 10 00 00 00 00 03 08 00 80 00
10: 0c 00 00 b0 00 00 00 00 04 00 03 c0 00 00 00 00
20: 01 90 00 00 00 00 00 00 00 00 00 00 7b 14 16 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00

01:00.1 Display controller: ATI Technologies Inc R430 [Radeon X800 XL] (PCIe) (Secondary)
	Subsystem: ABIT Computer Corp. Device 0017
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: Memory at c0020000 (64-bit, non-prefetchable) [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
00: 02 10 6d 55 00 00 10 00 00 00 80 03 08 00 00 00
10: 04 00 02 c0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 17 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 21)
	Subsystem: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 283
	Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at 88000000 [disabled] [size=64K]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data <?>
	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
		Address: 00000000fee0100c  Data: 4169
	Capabilities: [d0] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 4096 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Kernel driver in use: tg3
00: e4 14 77 16 06 04 10 00 21 00 00 02 08 00 00 00
10: 04 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 07 00 00 00 e4 14 77 16
30: 00 00 00 00 48 00 00 00 00 00 00 00 0c 01 00 00

05:06.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 5036
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at a000 [size=32]
	Region 1: I/O ports at a400 [size=128]
	Capabilities: [80] Power Management version 1
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ICE1724
00: 12 14 24 17 05 00 10 02 01 00 01 04 00 20 00 00
10: 01 a0 00 00 01 a4 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 00 00

05:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
	Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (8000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 12
	Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=2K]
	Region 1: I/O ports at a800 [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ohci1394
00: 06 11 44 30 07 00 10 02 80 10 00 0c 08 20 00 00
10: 00 00 10 d0 01 a8 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 44 30
30: 00 00 00 00 50 00 00 00 00 00 00 00 0c 01 00 20

setpci

  • setpci -s 0:0:1.0 7c.L
0ab0c500
  • setpci -s 0:0:1.0 80.L
ab00ac09
  • setpci -s 0:0:1.0 84.L
0000030b

dmidecode

Retrieved from "https://www.coreboot.org/index.php?title=Shuttle_SN25P_Build_Tutorial/Infos&oldid=7079"