Difference between revisions of "User:GNUtoo"

From coreboot
Jump to: navigation, search
(How to get rid of the vbios of the x60 [New Version])
(How to get rid of the vbios of the x60 [New Version])
Line 74: Line 74:
 
  [ ]  Log all memory accesses
 
  [ ]  Log all memory accesses
 
  [*]  Log IO accesses
 
  [*]  Log IO accesses
 +
Build and flash coreboot.
 +
Then go into i915tool and apply some patches for the x60 or redo them for your mainboard.
 
  $ cd i915tool/x60
 
  $ cd i915tool/x60
 
use picocom -b 115200 /dev/ttyUSB0 or stty to set the bauds of the Serial port.
 
use picocom -b 115200 /dev/ttyUSB0 or stty to set the bauds of the Serial port.

Revision as of 10:42, 21 May 2013

  • I did the port to the M4A785T-M
  • I've an x60
  • I've an alix.1C

scripts to help getting rid of the vbios of the x60

Script 1: generate the io access for the coreboot driver

#!/usr/local/plan9/bin/rc

by the following line:

#!/opt/plan9/bin/rc
  • create the ssamfix file with:
 ,s/\[ *[0-9]+\..[0-9]+\]//g
 ,s/^ *//g
y/^[RWU]/s/^/M /g
 ,s/\nU/ ;;;UDELAY/g
 ,|uniq -c
 ,s/^ *//g
 ,s/(^[0-9]+) ([MRW])/\2 \1/g
 ,s/"/\\"/g
 ,s/^M ([0-9]+) *(\[.*)/{M, \1, "\2"},/g
 ,s/^M ([0-9]+) *(.*)/{M, \1, "\2"},/g
 ,s/:  */:/g
 ,s/...UDELAY *([0-9]+)/\1/g
 ,s/^([RW]) ([0-9]+) (.*):0x([0-9a-f]+)(.*)/{\1, \2, "", \3, 0x\4, \5},/g
  • run the following commands:
. /etc/profile.d/plan9.sh
cat dmesg| ./ssam  -f ssamfix > foo.c

Script2: compare the io access that were too fast

  • Replace {V,0,}, with {V,7,}, in src/mainboard/vendor/device/i915io.c
  • cat /dev/ttyUSB0 > accesses.txt
  • Use that script against accesses.txt to find the guilty accesses:
#!/usr/bin/env python2
import sys,re
 
def main(args):
	try:
		f = open(args[1],'ro')
	except:
		print args[0], " <file>"

	for line in f:
		if re.match("0x[0-9]*: Got .*, expect .*",line):
			line = line.replace('\r\n',).replace(", expect ",':').replace(": Got ",':')
			split = line.split(':')
			#print split
			if split[1] != split[2]:
				print line
if __name__ == '__main__':
	main(sys.argv)

How to get semantic IOs

In i915tool:

  • import your IOs in prettyregs.c
  • compile prettyregs.c
  • run prettyregs

How to get rid of the vbios of the x60 [New Version]

Apply the coreboot patches, or re-do them for your mainboard Then configure coreboot with:

[*] Output verbose x86emu debug messages
[ ]   Trace JMP/RETF
[ ]   Trace all opcodes
[ ]   Log Plug&Play accesses
[ ]   Log Disk I/O
[ ]   Log PMM
[ ]   Debug VESA BIOS Extensions
[ ]   Redirect INT10 output to console
[ ]   Log intXX calls
[ ]   Log special memory accesses
[ ]   Log all memory accesses
[*]   Log IO accesses

Build and flash coreboot. Then go into i915tool and apply some patches for the x60 or redo them for your mainboard.

$ cd i915tool/x60

use picocom -b 115200 /dev/ttyUSB0 or stty to set the bauds of the Serial port. Then get logs:

$ cat /dev/ttyUSB0 | tee coreboot.log

Then remove the binary symbols, dos2unix will help identifying where they are:

$ dos2unix coreboot.log 
dos2unix: Binary symbol found at line 136332
dos2unix: Skipping binary file coreboot.log

Then do:

$ dos2unix coreboot.log

Then remove the lines before and after the log, the log looks like that:

[0047229e]c000:51cb outl(0x80001014, 0x0cf8)
[0047325f]c000:51d4 inw(0x0cfc) = 0x50a1