Difference between revisions of "VGA support"

From coreboot
Jump to: navigation, search
m (Fixed bios_extract link)
(RECOMMENDED: Extracting from your vendor bios image)
 
(14 intermediate revisions by 7 users not shown)
Line 31: Line 31:
  
 
== How to retrieve a good video bios ==
 
== How to retrieve a good video bios ==
 +
 +
There are various ways to get hold of the video bios blob and not all work equally good for all boards (rather the opposite).
 +
 +
The best way is to extract it from the vendor firmware.
 +
In the case of a traditional x86 BIOS this is rather easy and very reliable.
 +
On UEFI systems there does not seem to be a unified way of success but sometimes the steps below work.
 +
 +
Another category is downloading the blobs directly.
 +
Some vendors offer them in graphics driver packages etc. and you might even find them on enthusiasts website dedicated to firmware modding etc.
 +
 +
The most delicate ways are by dumping the blob from a running system.
 +
This might sound like the most reasonable way but the image present after boot might not be the same as it is (to be) stored in flash (e.g. if it is self modifying).
 +
However, in some cases this is the only way and then it is quite comfortable.
  
 
=== RECOMMENDED: Extracting from your vendor bios image ===
 
=== RECOMMENDED: Extracting from your vendor bios image ===
  
The recommended method is to take your mainboard vendor's BIOS image and extract the VGA BIOS using a tool called [http://review.coreboot.org/gitweb?p=bios_extract.git;a=summary bios_extract].
+
The recommended method is to take your mainboard vendor's BIOS image (if there is one) and extract the VGA BIOS using a tool called [[bios_extract]].
  
 
  $ git clone http://review.coreboot.org/p/bios_extract.git
 
  $ git clone http://review.coreboot.org/p/bios_extract.git
Line 43: Line 56:
  
 
Decompress your rom image with:
 
Decompress your rom image with:
<script lang="bash">
+
$ ./bios_extract hdmag217.rom
$ ./bios_extract hdmag217.rom
+
</script>
+
  
 
If bios_decode fails with a message like
 
If bios_decode fails with a message like
Line 92: Line 103:
 
  0x0D0A0 (  6801 bytes)  ->  bioscode_4.rom (31856 bytes) [0x5000:0xBF50]
 
  0x0D0A0 (  6801 bytes)  ->  bioscode_4.rom (31856 bytes) [0x5000:0xBF50]
  
Now you can check the option roms (oprom_?.rom) with the tool romheaders which is part of the [http://openbios.info/FCode_Suite FCode Suite]:
+
Now you can check the option roms (oprom_?.rom) with the tool romheaders which is part of the [http://www.openfirmware.info/FCODE_suite FCode Suite] (in debian-based distros, you can get it by installing the '''fcode-utils''' package):
  
 
  $ romheaders oprom_0.rom  
 
  $ romheaders oprom_0.rom  
Line 122: Line 133:
  
 
Congratulations, that's your option rom (compare PCI IDs and Class Code to find it among the option roms).
 
Congratulations, that's your option rom (compare PCI IDs and Class Code to find it among the option roms).
 +
 +
=== UEFI Method ===
 +
 +
UEFI's format is more structured than that of a traditional flat binary BIOS. In order to extract the VBIOS Option ROM you will need
 +
to parse out the UEFI Volumes and sub-Volumes out the UEFI filesystem using the [https://github.com/LongSoft/UEFITool UEFITool].
 +
 +
* Look for the " CSMCORE " DXE Driver ? usually having the hash 'a062cf1f-8473-4aa3-8793-600bc4ffe9a8'? and extract the RAW Section to a file.
 +
* Search for text "VGA Compatible BIOS" '''uncheck unicode''' and "extract Body"
 +
* Search for text "PCIR" and '''uncheck unicode''' and "extract Body"
  
 
=== Downloading ===
 
=== Downloading ===
  
There are sites that have video bios roms on their website. (I know of this one for nvidia cards: [http://whitebunny.demon.nl/hardware/chipset_nvidia.html])
+
There are sites that have video BIOS ROMs on their website (with all implications of retrieving a binary from an unknown source and executing it...).
  
For Intel onboard graphics you can download the vbios(vga bios) from Intel's download section. The vbios is included with some versions of the graphics driver. The summary will say something like "NOTE:These materials are intended for use by developers.Includes VBIOS". The actual vbios file is the *.dat file included with the graphics driver.
+
For Intel onboard graphics you can download the vbios (vga bios) from Intel's download section. The vbios is included with some versions of the graphics driver. The summary will say something like "NOTE:These materials are intended for use by developers.Includes VBIOS". The actual vbios file is the *.dat file included with the graphics driver.
  
=== Extracting from the system (if everything else fails) ===
+
=== Retrieval via Linux kernel ===
 +
Some Linux drivers (e.g. <tt>radeon</tt> for AMD) make option ROMs like the video blob available to user space via sysfs.
 +
To use that to get the blob you need to enable it first.
 +
To that end you need to determine the path within <tt>/sys</tt> corresponding to your graphics chip.
 +
It looks like this: <tt>/sys/devices/pci<domain>:<bus>/<domain>:<bus>:<slot>.<function>/rom</tt>.
  
However you might be able to retrieve your on-board video bios with Linux as well.
+
You can get the respective information with <tt>lspci</tt>, for example:
 +
# lspci -tv
 +
-[0000:00]-+-00.0  Advanced Micro Devices, Inc. [AMD] Family 16h Processor Root Complex
 +
            +-01.0  Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8210]
 +
...
  
* Boot up a machine with a commercial bios (not coreboot) with the video card you wish to work under coreboot.
+
Here the the needed bits (for the ROM of the Kabini device) are:
 +
* PCI domain: (almost always) 0000
 +
* PCI bus: (also very commonly) 00
 +
* PCI slot: 01 (logical slot; different from any physical slots)
 +
* PCI function: 0 (a PCI device might have multiple functions... shouldn't matter here)
 +
 
 +
To enable reading of the ROM you need to write 1 to the respective file, e.g.:
 +
 
 +
echo 1 > /sys/devices/pci0000:00/0000:00:01.0/rom
 +
 
 +
The same file should then contain the video blob and it should be possible to simply copy it, e.g.:
 +
 
 +
cp /sys/devices/pci0000:00/0000:00:01.0/rom vgabios.bin
 +
 
 +
<tt>romheaders</tt> should print reasonable output for this file.
 +
 
 +
=== Extraction from mapped memory (if everything else fails) ===
 +
 
 +
However you might be able to retrieve your on-board video BIOS with Linux as well.
 +
 
 +
* Boot up a machine with a commercial BIOS (not coreboot) with the video card you wish to work under coreboot.
 
* You can see where and how much your card's bios is using by doing a  
 
* You can see where and how much your card's bios is using by doing a  
<source lang="bash">cat /proc/iomem | grep 'Video ROM'</source>
+
<source lang="bash">grep 'Video ROM' /proc/iomem</source>
* From the command line enter:<br /><source lang="bash">dd if=/dev/mem of=vgabios.bin bs=1k count=64 skip=768</source> This assumes you card's bios is cached at 0xc0000, and is 64K long.
+
* From the command line enter:<br /><source lang="bash">dd if=/dev/mem of=vgabios.bin bs=1k count=64 skip=768</source> This assumes you card's BIOS is cached at 0xc0000, and is 64K long.
 
<br /><source lang="bash">dd if=/dev/mem of=video.bios.bin.4 bs=65536 count=1 skip=12</source>
 
<br /><source lang="bash">dd if=/dev/mem of=video.bios.bin.4 bs=65536 count=1 skip=12</source>
 
This works for many of the VIA Epia boards.<br>
 
This works for many of the VIA Epia boards.<br>
Line 144: Line 192:
 
dd if=/dev/mem of=vgabios.bin bs=1c skip=$[0x$s] count=$[$[0x$e]-$[0x$s]+1])
 
dd if=/dev/mem of=vgabios.bin bs=1c skip=$[0x$s] count=$[$[0x$e]-$[0x$s]+1])
 
</source>
 
</source>
* You now have a video bios image
+
* You (might) have a video BIOS image now. Check it at least with romheaders (as described above).
 +
 
 +
== YABEL ==
 +
* Yabel can be used to trace the VGA option rom.
 +
* However its ability to prevent the option rom to do nasty things is limited: Often the GPU offers a way (e.g. trough an IO BAR) to access arbitrary locations in RAM, so limiting access of the GPU's PCI device to the option rom wouldn't contain it completely.
 +
 
 +
See [[Coreboot Options]] for more information about the option.
 +
 
 +
[[Category:Blobs]]

Latest revision as of 19:01, 9 April 2015

VGA initialization in coreboot

Since coreboot v4 you can configure VGA initialization in Kconfig. For older versions of coreboot check the history of this page.

First do:

 $ make menuconfig

Then go

    Chipset  --->
     [*] Setup bridges on path to VGA adapter 
     [*] Run VGA option ROMs
     Option ROM execution type (Native mode)  --->

Alternatively you can choose the "Secure mode" to run the VGA option rom in a contained environment.

If you have no on-board graphics, you are done configuring coreboot at this point. You may exit configuration, and run make to get your VGA enabled coreboot image.

On-board Video Devices

If you run coreboot on a system with on-board graphics, you have to embed a VGA on the top level, enter the file name of your option rom and the PCI ID of the associated graphics device in the form <vendor_id>,<device_id>:

   VGA BIOS  --->
    [*] Add a VGA BIOS image
    (oprom-0.rom) VGA BIOS path and filename
    (8086,27a2) VGA device PCI IDs

That's it, exit configuration, and run make to get your VGA enabled coreboot image.

How to retrieve a good video bios

There are various ways to get hold of the video bios blob and not all work equally good for all boards (rather the opposite).

The best way is to extract it from the vendor firmware. In the case of a traditional x86 BIOS this is rather easy and very reliable. On UEFI systems there does not seem to be a unified way of success but sometimes the steps below work.

Another category is downloading the blobs directly. Some vendors offer them in graphics driver packages etc. and you might even find them on enthusiasts website dedicated to firmware modding etc.

The most delicate ways are by dumping the blob from a running system. This might sound like the most reasonable way but the image present after boot might not be the same as it is (to be) stored in flash (e.g. if it is self modifying). However, in some cases this is the only way and then it is quite comfortable.

RECOMMENDED: Extracting from your vendor bios image

The recommended method is to take your mainboard vendor's BIOS image (if there is one) and extract the VGA BIOS using a tool called bios_extract.

$ git clone http://review.coreboot.org/p/bios_extract.git

This is the most reliable way:

  • You are guaranteed to get an image that fits to your onboard VGA
  • Even if your VGA BIOS uses self-modifying code you get a correct image

Decompress your rom image with:

$ ./bios_extract hdmag217.rom

If bios_decode fails with a message like

Using file "hdmag217.rom" (513kB)
Found Phoenix BIOS "Phoenix ServerBIOS 3 Release 6.0     "
Version "DEVEL4E0", created on 03/20/06 at 14:37:39.
Error: Invalid module signature at 0x80581

then you have to cut the flash chip description off the image. In this case the BIOS image is 512KB, so you do

$ dd if=hdmag217.rom of=hdma.rom bs=512k count=1
1+0 records in
1+0 records out
524288 bytes transferred in 0.000883 secs (593688784 bytes/sec)


You will get an output similar to this:

Using file "hdma.rom" (512kB)
Found Phoenix BIOS "Phoenix ServerBIOS 3 Release 6.0     "
Version "DEVEL4E0", created on 03/20/06 at 14:37:39.
0x715FC ( 27134 bytes)   ->   romexec_0.rom
0x6E1CB ( 13338 bytes)   ->   strings_0.rom	(29401 bytes)
0x6D65D (  2899 bytes)   ->   display_0.rom	(4128 bytes)
0x6B62E (  8208 bytes)   ->   update_0.rom
0x6B1E3 (  1072 bytes)   ->   decompcode_0.rom			 [0x5000:0xB6D0]
0x6564F ( 23421 bytes)   ->   oprom_0.rom	(36864 bytes)
0x65608 (    44 bytes)   ->   tcpa_H_0.rom	(32 bytes)
0x65592 (    91 bytes)   ->   acpi_1.rom	(116 bytes)
0x65519 (    94 bytes)   ->   acpi_2.rom	(244 bytes)
0x654ED (    13 bytes)   ->   tcpa_*_0.rom
0x64D4F (  1927 bytes)   ->   bioscode_0.rom	(31382 bytes)	 [0xF000:0x856A]
0x60020 ( 19728 bytes)   ->   romexec_1.rom
0x570D9 ( 36656 bytes)   ->   oprom_1.rom	(61440 bytes)
0x4DB9D ( 38177 bytes)   ->   oprom_2.rom	(63488 bytes)
0x46493 ( 30447 bytes)   ->   oprom_3.rom	(65536 bytes)
0x41DAB ( 18125 bytes)   ->   logo_0.rom	(310162 bytes)
0x39CA5 ( 25439 bytes)   ->   oprom_4.rom	(51200 bytes)
0x36005 ( 15493 bytes)   ->   setup_0.rom	(37682 bytes)
0x325D7 ( 14867 bytes)   ->   template_0.rom	(37728 bytes)
0x2FA36 ( 11142 bytes)   ->   miser_0.rom	(16208 bytes)
0x2E63C (  5087 bytes)   ->   tcpa_Q_0.rom	(16096 bytes)
0x2D7C3 (  3678 bytes)   ->   acpi_0.rom	(10464 bytes)
0x1FA2A ( 41023 bytes)   ->   bioscode_1.rom	(56080 bytes)	 [0xE000:0x40F0]
0x14FE0 ( 43567 bytes)   ->   bioscode_2.rom	(62416 bytes)	 [0x6000:0xCC30]
0x0EB4C ( 25721 bytes)   ->   bioscode_3.rom	(36976 bytes)	 [0x6000:0x3BC0]
0x0D0A0 (  6801 bytes)   ->   bioscode_4.rom	(31856 bytes)	 [0x5000:0xBF50]

Now you can check the option roms (oprom_?.rom) with the tool romheaders which is part of the FCode Suite (in debian-based distros, you can get it by installing the fcode-utils package):

$ romheaders oprom_0.rom 

Image 1:
PCI Expansion ROM Header:
  Signature: 0x55aa (Ok)
  CPU unique data: 0x48 0xeb 0x7b 0x01 0x76 0x00 0x00 0x00
                   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
  Pointer to PCI Data Structure: 0x017c

PCI Data Structure:
  Signature: 0x50434952 'PCIR' (Ok)
  Vendor ID: 0x1002
  Device ID: 0x4752
  Vital Product Data:  0x0000
  PCI Data Structure Length: 0x0018 (24 bytes)
  PCI Data Structure Revision: 0x00
  Class Code: 0x030000 (VGA Display controller)
  Image Length: 0x0048 blocks (36864 bytes)
  Revision Level of Code/Data: 0x0421
  Code Type: 0x00 (Intel x86)
  Last-Image Flag: 0x80 (last image in rom)
  Reserved: 0x0000

Platform specific data for x86 compliant option rom:
  Initialization Size: 0x48 (36864 bytes)
  Entry point for INIT function: 0x80

Congratulations, that's your option rom (compare PCI IDs and Class Code to find it among the option roms).

UEFI Method

UEFI's format is more structured than that of a traditional flat binary BIOS. In order to extract the VBIOS Option ROM you will need to parse out the UEFI Volumes and sub-Volumes out the UEFI filesystem using the UEFITool.

  • Look for the " CSMCORE " DXE Driver ? usually having the hash 'a062cf1f-8473-4aa3-8793-600bc4ffe9a8'? and extract the RAW Section to a file.
  • Search for text "VGA Compatible BIOS" uncheck unicode and "extract Body"
  • Search for text "PCIR" and uncheck unicode and "extract Body"

Downloading

There are sites that have video BIOS ROMs on their website (with all implications of retrieving a binary from an unknown source and executing it...).

For Intel onboard graphics you can download the vbios (vga bios) from Intel's download section. The vbios is included with some versions of the graphics driver. The summary will say something like "NOTE:These materials are intended for use by developers.Includes VBIOS". The actual vbios file is the *.dat file included with the graphics driver.

Retrieval via Linux kernel

Some Linux drivers (e.g. radeon for AMD) make option ROMs like the video blob available to user space via sysfs. To use that to get the blob you need to enable it first. To that end you need to determine the path within /sys corresponding to your graphics chip. It looks like this: /sys/devices/pci<domain>:<bus>/<domain>:<bus>:<slot>.<function>/rom.

You can get the respective information with lspci, for example:

# lspci -tv
-[0000:00]-+-00.0  Advanced Micro Devices, Inc. [AMD] Family 16h Processor Root Complex
           +-01.0  Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8210]
...

Here the the needed bits (for the ROM of the Kabini device) are:

  • PCI domain: (almost always) 0000
  • PCI bus: (also very commonly) 00
  • PCI slot: 01 (logical slot; different from any physical slots)
  • PCI function: 0 (a PCI device might have multiple functions... shouldn't matter here)

To enable reading of the ROM you need to write 1 to the respective file, e.g.:

echo 1 > /sys/devices/pci0000:00/0000:00:01.0/rom

The same file should then contain the video blob and it should be possible to simply copy it, e.g.:

cp /sys/devices/pci0000:00/0000:00:01.0/rom vgabios.bin

romheaders should print reasonable output for this file.

Extraction from mapped memory (if everything else fails)

However you might be able to retrieve your on-board video BIOS with Linux as well.

  • Boot up a machine with a commercial BIOS (not coreboot) with the video card you wish to work under coreboot.
  • You can see where and how much your card's bios is using by doing a
grep 'Video ROM' /proc/iomem
  • From the command line enter:
    dd if=/dev/mem of=vgabios.bin bs=1k count=64 skip=768
    This assumes you card's BIOS is cached at 0xc0000, and is 64K long.

dd if=/dev/mem of=video.bios.bin.4 bs=65536 count=1 skip=12

This works for many of the VIA Epia boards.
Alternatively you can automatically generate it using this nice script from Peter Stuge:

cat /proc/iomem | grep 'Video ROM' | (read m; m=${m/ :*}; s=${m/-*}; e=${m/*-}; \
dd if=/dev/mem of=vgabios.bin bs=1c skip=$[0x$s] count=$[$[0x$e]-$[0x$s]+1])
  • You (might) have a video BIOS image now. Check it at least with romheaders (as described above).

YABEL

  • Yabel can be used to trace the VGA option rom.
  • However its ability to prevent the option rom to do nasty things is limited: Often the GPU offers a way (e.g. trough an IO BAR) to access arbitrary locations in RAM, so limiting access of the GPU's PCI device to the option rom wouldn't contain it completely.

See Coreboot Options for more information about the option.