Difference between revisions of "Board:via/pc2500e"

From coreboot
Jump to: navigation, search
(Build tutorial: Ugly hack no longer needed.)
(No difference)

Revision as of 15:07, 16 November 2008

The VIA pc2500e, V1.0C

This page describes how to use coreboot on the VIA pc2500e mainboard.

Status

Device/functionality Status Comments
CPU
CPU works OK VIA Esther processor 1500MHz
L1 cache enabled OK CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
L2 cache enabled OK CPU: L2 Cache: 128K (64 bytes/line)
L3 cache enabled N/A
Multiple CPU support N/A
Multi-core support N/A
Hardware virtualization N/A
RAM
EDO N/A
SDRAM N/A
SO-DIMM N/A
DDR N/A
DDR2 OK The CN700 code in svn currently only supported one DIMM. The RAM inserted in the second DIMM will not be usable.
DDR3 N/A
Dual channel support N/A
ECC support N/A
On-board Hardware
On-board IDE 3.5" OK The IDE device names in FILO are hde and hdf (hda, hdb, hdc, hdd are for SATA)!
On-board IDE 2.5" N/A
On-board SATA  ?
On-board SCSI Unknown
On-board USB  ?
On-board VGA OK Works fine with the openchrome X.org driver. No VGA BIOS needed, no BOCHS needed!
On-board ethernet  ?
On-board audio OK
On-board modem  ?
On-board FireWire N/A
On-board smartcard reader N/A
On-board CompactFlash N/A
On-board PCMCIA N/A
Add-on slots/cards
ISA add-on cards N/A
Audio/Modem-Riser (AMR/CNR) cards Untested There's a CNR header on the board.
PCI add-on cards  ?
Mini-PCI add-on cards Unknown
PCI-X add-on cards Unknown
AGP graphics cards N/A
PCI Express x1 add-on cards N/A
PCI Express x2 add-on cards N/A
PCI Express x4 add-on cards N/A
PCI Express x8 add-on cards N/A
PCI Express x16 add-on cards N/A
PCI Express x32 add-on cards N/A
HTX add-on cards N/A
Legacy / Super I/O
Floppy Untested
Serial port 1 (COM1) OK
Serial port 2 (COM2) N/A
Parallel port OK Doing modprobe ppdev works fine, but further tests were not performed.
PS/2 keyboard OK
PS/2 mouse OK
Game port N/A
Infrared Untested
PC speaker OK
DiskOnChip N/A
Miscellaneous
Sensors / fan control OK Works fine using the it87 kernel module.
Hardware watchdog N/A
SMBus Unknown
CAN bus N/A
CPU frequency scaling  ?
Other powersaving features  ?
ACPI No No ACPI support (yet?) for this board.
Reboot OK
Poweroff No Doesn't work yet, probably requires (at least partial) ACPI support.
Suspend Unknown
Nonstandard LEDs N/A
High precision event timers (HPET) OK Using hpet=force on the Linux command line works, but it's unclear whether using the HPET is better or not.
Random number generator (RNG) OK Doing modprobe via-rng works fine, further test were not performed, yet.
Wake on modem ring Untested
Wake on LAN Untested
Wake on keyboard Untested
Wake on mouse Untested
Flashrom OK Works fine out of the box with the vendor BIOS as well as with coreboot.

Build tutorial

$ svn co svn://coreboot.org/repos/trunk/coreboot-v2
$ cd coreboot-v2/targets
$ ./buildtarget via/pc2500e
$ cd via/pc2500e/via_pc2500e
$ make -s

The resulting coreboot.rom is your coreboot ROM image you can flash using flashrom.

Public domain I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.