[coreboot-gerrit] Patch set updated for coreboot: 44ee758 AMD Olive Hill: Add new AMD mainboard using Kabini processor

Bruce Griffith (Bruce.Griffith@se-eng.com) gerrit at coreboot.org
Thu Aug 1 14:56:14 CEST 2013


Bruce Griffith (Bruce.Griffith at se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3784

-gerrit

commit 44ee7581c9043537183b5a3939740f98b810a9aa
Author: Siyuan Wang <wangsiyuanbuaa at gmail.com>
Date:   Tue Jul 9 17:42:43 2013 +0800

    AMD Olive Hill: Add new AMD mainboard using Kabini processor
    
    Change-Id: I1f252b67c039d28df96e8dfd458a1ca6a7dbc816
    Signed-off-by: Siyuan Wang <SiYuan.Wang at amd.com>
    Signed-off-by: Siyuan Wang <wangsiyuanbuaa at gmail.com>
    Reviewed-by: Bruce Griffith <bruce.griffith at se-eng.com>
    Tested-by: Bruce Griffith <bruce.griffith at se-eng.com>
---
 src/mainboard/amd/Kconfig                          |    3 +
 src/mainboard/amd/olivehill/BiosCallOuts.c         |  308 +++++
 src/mainboard/amd/olivehill/BiosCallOuts.h         |   31 +
 src/mainboard/amd/olivehill/Kconfig                |  104 ++
 src/mainboard/amd/olivehill/Makefile.inc           |   28 +
 src/mainboard/amd/olivehill/OptionsIds.h           |   67 +
 src/mainboard/amd/olivehill/PlatformGnbPcie.c      |  184 +++
 .../amd/olivehill/PlatformGnbPcieComplex.h         |   32 +
 src/mainboard/amd/olivehill/acpi/AmdImc.asl        |  114 ++
 src/mainboard/amd/olivehill/acpi/ide.asl           |  246 ++++
 src/mainboard/amd/olivehill/acpi/routing.asl       |  200 +++
 src/mainboard/amd/olivehill/acpi/sata.asl          |  148 ++
 src/mainboard/amd/olivehill/acpi/usb.asl           |  114 ++
 src/mainboard/amd/olivehill/acpi_tables.c          |  333 +++++
 src/mainboard/amd/olivehill/agesawrapper.c         |  771 +++++++++++
 src/mainboard/amd/olivehill/agesawrapper.h         |   97 ++
 src/mainboard/amd/olivehill/buildOpts.c            |  505 +++++++
 src/mainboard/amd/olivehill/cmos.layout            |  114 ++
 src/mainboard/amd/olivehill/devicetree.cb          |   76 ++
 src/mainboard/amd/olivehill/dsdt.asl               | 1416 ++++++++++++++++++++
 src/mainboard/amd/olivehill/get_bus_conf.c         |  143 ++
 src/mainboard/amd/olivehill/irq_tables.c           |  112 ++
 src/mainboard/amd/olivehill/mainboard.c            |   51 +
 src/mainboard/amd/olivehill/mptable.c              |  245 ++++
 src/mainboard/amd/olivehill/romstage.c             |  176 +++
 25 files changed, 5618 insertions(+)

diff --git a/src/mainboard/amd/Kconfig b/src/mainboard/amd/Kconfig
index 2276129..80bd2b1 100644
--- a/src/mainboard/amd/Kconfig
+++ b/src/mainboard/amd/Kconfig
@@ -41,6 +41,8 @@ config BOARD_AMD_PARMER
 	bool "Parmer"
 config BOARD_AMD_THATCHER
 	bool "Thatcher"
+config BOARD_AMD_OLIVEHILL
+	bool "Olive Hill"
 endchoice
 
 source "src/mainboard/amd/db800/Kconfig"
@@ -62,6 +64,7 @@ source "src/mainboard/amd/torpedo/Kconfig"
 source "src/mainboard/amd/union_station/Kconfig"
 source "src/mainboard/amd/parmer/Kconfig"
 source "src/mainboard/amd/thatcher/Kconfig"
+source "src/mainboard/amd/olivehill/Kconfig"
 
 config MAINBOARD_VENDOR
 	string
diff --git a/src/mainboard/amd/olivehill/BiosCallOuts.c b/src/mainboard/amd/olivehill/BiosCallOuts.c
new file mode 100644
index 0000000..3fd3684
--- /dev/null
+++ b/src/mainboard/amd/olivehill/BiosCallOuts.c
@@ -0,0 +1,308 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "agesawrapper.h"
+#include "amdlib.h"
+#include "BiosCallOuts.h"
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "cbfs.h"
+
+STATIC CONST BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+	{AGESA_ALLOCATE_BUFFER,          fam16kb_AllocateBuffer },
+	{AGESA_DEALLOCATE_BUFFER,        fam16kb_DeallocateBuffer },
+	{AGESA_DO_RESET,                 fam16kb_Reset },
+	{AGESA_LOCATE_BUFFER,            fam16kb_LocateBuffer },
+	{AGESA_READ_SPD,                 fam16kb_ReadSpd },
+	{AGESA_READ_SPD_RECOVERY,        fam16kb_DefaultRet },
+	{AGESA_RUNFUNC_ONAP,             fam16kb_RunFuncOnAp },
+	{AGESA_GET_IDS_INIT_DATA,        fam16kb_GetIdsInitData },
+	{AGESA_HOOKBEFORE_DQS_TRAINING,  fam16kb_HookBeforeDQSTraining },
+	{AGESA_HOOKBEFORE_EXIT_SELF_REF, fam16kb_HookBeforeExitSelfRefresh },
+	{AGESA_FCH_OEM_CALLOUT,          Fch_Oem_config },
+	{AGESA_GNB_GFX_GET_VBIOS_IMAGE,  fam16kb_HookGfxGetVbiosImage }
+};
+
+AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINTN i;
+	AGESA_STATUS CalloutStatus;
+	UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]);
+
+	for (i = 0; i < CallOutCount; i++)
+	{
+		if (BiosCallouts[i].CalloutName == Func)
+			break;
+	}
+
+	if(i >= CallOutCount)
+		return AGESA_UNSUPPORTED;
+
+	CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
+
+	return CalloutStatus;
+}
+
+/**
+ * AMD Olivehill Platform ALC272 Verb Table
+ */
+static const CODEC_ENTRY Olivehill_Alc272_VerbTbl[] = {
+	{0x11, 0x411111F0}, //        - SPDIF_OUT2
+	{0x12, 0x411111F0}, //        - DMIC_1/2
+	{0x13, 0x411111F0}, //        - DMIC_3/4
+	{0x14, 0x411111F0}, // Port D - LOUT1
+	{0x15, 0x411111F0}, // Port A - LOUT2
+	{0x16, 0x411111F0}, //
+	{0x17, 0x411111F0}, // Port H - MONO
+	{0x18, 0x01a19840}, // Port B - MIC1
+	{0x19, 0x411111F0}, // Port F - MIC2
+	{0x1a, 0x01813030}, // Port C - LINE1
+	{0x1b, 0x411111F0}, // Port E - LINE2
+	{0x1d, 0x40130605}, //        - PCBEEP
+	{0x1e, 0x01441120}, //        - SPDIF_OUT1
+	{0x21, 0x01214010}, // Port I - HPOUT
+	{0xff, 0xffffffff}
+};
+
+static const CODEC_TBL_LIST OlivehillCodecTableList[] =
+{
+	{0x10ec0272, (CODEC_ENTRY*)&Olivehill_Alc272_VerbTbl[0]},
+	{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
+};
+
+#define FAN_INPUT_INTERNAL_DIODE	0
+#define FAN_INPUT_TEMP0			1
+#define FAN_INPUT_TEMP1			2
+#define FAN_INPUT_TEMP2			3
+#define FAN_INPUT_TEMP3			4
+#define FAN_INPUT_TEMP0_FILTER		5
+#define FAN_INPUT_ZERO			6
+#define FAN_INPUT_DISABLED		7
+
+#define FAN_AUTOMODE			(1 << 0)
+#define FAN_LINEARMODE			(1 << 1)
+#define FAN_STEPMODE			~(1 << 1)
+#define FAN_POLARITY_HIGH		(1 << 2)
+#define FAN_POLARITY_LOW		~(1 << 2)
+
+/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
+#define FREQ_28KHZ			0x0
+#define FREQ_25KHZ			0x1
+#define FREQ_23KHZ			0x2
+#define FREQ_21KHZ			0x3
+#define FREQ_29KHZ			0x4
+#define FREQ_18KHZ			0x5
+#define FREQ_100HZ			0xF7
+#define FREQ_87HZ			0xF8
+#define FREQ_58HZ			0xF9
+#define FREQ_44HZ			0xFA
+#define FREQ_35HZ			0xFB
+#define FREQ_29HZ			0xFC
+#define FREQ_22HZ			0xFD
+#define FREQ_14HZ			0xFE
+#define FREQ_11HZ			0xFF
+
+/* Olivehill Hardware Monitor Fan Control
+ * Hardware limitation:
+ *  HWM failed to read the input temperture vi I2C,
+ *  if other software switch the I2C switch by mistake or intention.
+ *  We recommend to using IMC to control Fans, instead of HWM.
+ */
+#if 0
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+{
+	FCH_HWM_FAN_CTR oem_factl[5] = {
+		/*temperatuer input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
+		/* Olivehill FanOUT0 Fan header J32 */
+		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
+		/* Olivehill FanOUT1 Fan header J31*/
+		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
+		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
+		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
+		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
+	};
+	LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
+
+	/* Enable IMC fan control. the recommand way */
+#if defined CONFIG_HUDSON_IMC_FWM && (CONFIG_HUDSON_IMC_FWM == 1)
+	/* HwMonitorEnable = TRUE &&  HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+	FchParams->Hwm.HwMonitorEnable = TRUE;
+	FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+
+	FchParams->Imc.ImcEnable = TRUE;
+	FchParams->Hwm.HwmControl = 1;	/* 1 IMC, 0 HWM */
+	FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+
+	LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+
+	/* Thermal Zone Parameter */
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00;	/* Zone */
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
+	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;
+
+	/* IMC Fan Policy temperature thresholds */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00;	/* Zone */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80;	/*AC0 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0;	/*AC1 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0;	/*AC2 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0;	/*AC3 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0;	/*AC4 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0;	/*AC5 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0;	/*AC6 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0;	/*AC7 lowest threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0;	/*critical threshold* in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+
+	/* IMC Fan Policy PWM Settings */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00;	/* Zone */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0;	/* AL0 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0;	/* AL1 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0;	/* AL2 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00;	/* AL3 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00;	/* AL4 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00;	/* AL5 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00;	/* AL6 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00;	/* AL7 percentage */
+
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01;	/* Zone */
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5;
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
+	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
+
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01;	/* zone */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60;	/*AC0 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40;	/*AC1 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0;	/*AC2 threshold in Celsius */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0;	/*AC3 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0;	/*AC4 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0;	/*AC5 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0;	/*AC6 threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0;	/*AC7 lowest threshold in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0;	/*critical threshold* in Celsius, 0xFF is not define */
+	FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
+
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01;	/*Zone */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0;	/* AL0 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0;	/* AL1 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0;	/* AL2 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00;	/* AL3 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00;	/* AL4 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00;	/* AL5 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00;	/* AL6 percentage */
+	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00;	/* AL7 percentage */
+
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2;	/* Zone */
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5;	/* PWM steping rate in unit of PWM level percentage */
+	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
+
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3;	/* Zone */
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
+	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
+
+	/* IMC Function */
+	FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8;
+
+	/* NOTE:
+	 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+	 * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+	 * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+	 */
+
+#else /* HWM fan control, the way not recommand */
+	FchParams->Imc.ImcEnable = FALSE;
+	FchParams->Hwm.HwMonitorEnable = TRUE;
+	FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+
+#endif /* CONFIG_HUDSON_IMC_FWM */
+}
+#endif
+
+/**
+ * Fch Oem setting callback
+ *
+ *  Configure platform specific Hudson device,
+ *   such Azalia, SATA, IMC etc.
+ */
+AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
+{
+	FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *)FchData;
+
+	if (FchParams->StdHeader->Func == AMD_INIT_RESET) {
+		//FCH_RESET_DATA_BLOCK *FchParams_reset =  (FCH_RESET_DATA_BLOCK *) FchData;
+		printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
+		//FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */
+	} else if (FchParams->StdHeader->Func == AMD_INIT_ENV) {
+		FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
+		printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
+
+		/* Azalia Controller OEM Codec Table Pointer */
+		FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&OlivehillCodecTableList[0]);
+		/* Azalia Controller Front Panel OEM Table Pointer */
+
+		/* Fan Control */
+		//oem_fan_control(FchParams_env);
+
+		/* XHCI configuration */
+#if CONFIG_HUDSON_XHCI_ENABLE
+		FchParams_env->Usb.Xhci0Enable = TRUE;
+#else
+		FchParams_env->Usb.Xhci0Enable = FALSE;
+#endif
+		FchParams_env->Usb.Xhci1Enable = FALSE;
+
+		/* sata configuration */
+	}
+	printk(BIOS_DEBUG, "Done\n");
+
+	return AGESA_SUCCESS;
+}
diff --git a/src/mainboard/amd/olivehill/BiosCallOuts.h b/src/mainboard/amd/olivehill/BiosCallOuts.h
new file mode 100644
index 0000000..4c7e100
--- /dev/null
+++ b/src/mainboard/amd/olivehill/BiosCallOuts.h
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BIOS_CALLOUT_H_
+#define _BIOS_CALLOUT_H_
+
+#include <northbridge/amd/agesa/family16kb/fam16kb_callouts.h>
+
+/* CALLOUT Initialization */
+AGESA_STATUS GetBiosCallout(UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+
+/* FCH OEM Config*/
+AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
+
+#endif //_BIOS_CALLOUT_H_
diff --git a/src/mainboard/amd/olivehill/Kconfig b/src/mainboard/amd/olivehill/Kconfig
new file mode 100644
index 0000000..20acba9
--- /dev/null
+++ b/src/mainboard/amd/olivehill/Kconfig
@@ -0,0 +1,104 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+if BOARD_AMD_OLIVEHILL
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select ARCH_X86
+	select CPU_AMD_AGESA_FAMILY16_KB
+	select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB
+	select SOUTHBRIDGE_AMD_AGESA_YANGTZE
+	select HAVE_OPTION_TABLE
+	select HAVE_PIRQ_TABLE
+	select HAVE_MP_TABLE
+	select HAVE_ACPI_RESUME
+	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
+	select LIFT_BSP_APIC_ID
+	select SERIAL_CPU_INIT
+	select AMDMCT
+	select HAVE_ACPI_TABLES
+	select BOARD_ROMSIZE_KB_4096
+	select GFXUMA
+
+config MAINBOARD_DIR
+	string
+	default amd/olivehill
+
+config APIC_ID_OFFSET
+	hex
+	default 0x0
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "DB-FT3"
+
+config HW_MEM_HOLE_SIZEK
+	hex
+	default 0x200000
+
+config MAX_CPUS
+	int
+	default 4
+
+config MAX_PHYSICAL_CPUS
+	int
+	default 1
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+	bool
+	default n
+
+config MEM_TRAIN_SEQ
+	int
+	default 2
+
+config IRQ_SLOT_COUNT
+	int
+	default 11
+
+config RAMTOP
+	hex
+	default 0x1000000
+
+config HEAP_SIZE
+	hex
+	default 0xc0000
+
+config ACPI_SSDTX_NUM
+	int
+	default 0
+
+config RAMBASE
+	hex
+	default 0x200000
+
+config ONBOARD_VGA_IS_PRIMARY
+	bool
+	default y
+
+config VGA_BIOS_ID
+	string
+	default "1002,9832"
+
+config WARNINGS_ARE_ERRORS
+	bool
+	default n
+
+endif # BOARD_AMD_OLIVEHILL
diff --git a/src/mainboard/amd/olivehill/Makefile.inc b/src/mainboard/amd/olivehill/Makefile.inc
new file mode 100644
index 0000000..a83297a
--- /dev/null
+++ b/src/mainboard/amd/olivehill/Makefile.inc
@@ -0,0 +1,28 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+romstage-y += buildOpts.c
+romstage-y += agesawrapper.c
+romstage-y += BiosCallOuts.c
+romstage-y += PlatformGnbPcie.c
+
+ramstage-y += buildOpts.c
+ramstage-y += agesawrapper.c
+ramstage-y += BiosCallOuts.c
+ramstage-y += PlatformGnbPcie.c
diff --git a/src/mainboard/amd/olivehill/OptionsIds.h b/src/mainboard/amd/olivehill/OptionsIds.h
new file mode 100644
index 0000000..0a1d328
--- /dev/null
+++ b/src/mainboard/amd/olivehill/OptionsIds.h
@@ -0,0 +1,67 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 12067 $   @e \$Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $
+ */
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ *  This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ *    IDSOPT_IDS_ENABLED
+ *    IDSOPT_ERROR_TRAP_ENABLED
+ *    IDSOPT_CONTROL_ENABLED
+ *    IDSOPT_TRACING_ENABLED
+ *    IDSOPT_PERF_ANALYSIS
+ *    IDSOPT_ASSERT_ENABLED
+ *    IDS_DEBUG_PORT
+ *    IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ *
+ **/
+
+#define IDSOPT_IDS_ENABLED     TRUE
+//#define IDSOPT_CONTROL_ENABLED TRUE
+//#define IDSOPT_TRACING_ENABLED TRUE
+#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE
+//#define IDSOPT_PERF_ANALYSIS   TRUE
+#define IDSOPT_ASSERT_ENABLED  TRUE
+//#undef IDSOPT_DEBUG_ENABLED
+//#define IDSOPT_DEBUG_ENABLED  FALSE
+//#undef IDSOPT_HOST_SIMNOW
+//#define IDSOPT_HOST_SIMNOW    FALSE
+//#undef IDSOPT_HOST_HDT
+//#define IDSOPT_HOST_HDT       FALSE
+//#define IDS_DEBUG_PORT    0x80
+
+#endif
diff --git a/src/mainboard/amd/olivehill/PlatformGnbPcie.c b/src/mainboard/amd/olivehill/PlatformGnbPcie.c
new file mode 100644
index 0000000..8a79d22
--- /dev/null
+++ b/src/mainboard/amd/olivehill/PlatformGnbPcie.c
@@ -0,0 +1,184 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "PlatformGnbPcieComplex.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE
+
+PCIe_PORT_DESCRIPTOR PortList [] = {
+	{
+		0, //Descriptor flags  !!!IMPORTANT!!! Terminate last element of array
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x01, 0)
+	},
+	/* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */
+	{
+		0, //Descriptor flags  !!!IMPORTANT!!! Terminate last element of array
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x02, 0)
+	},
+	/* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */
+	{
+		0, //Descriptor flags  !!!IMPORTANT!!! Terminate last element of array
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 1, 1),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 3,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x03, 0)
+	},
+	/* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */
+	{
+		0,
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 0),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 2,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x04, 0)
+	},
+	/* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */
+	{
+		DESCRIPTOR_TERMINATE_LIST, //Descriptor flags  !!!IMPORTANT!!! Terminate last element of array
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x05, 0)
+	}
+};
+
+PCIe_DDI_DESCRIPTOR DdiList [] = {
+	/* DP0 to HDMI0/DP */
+	{
+		0,
+		PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
+		PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
+	},
+	/* DP1 to FCH */
+	{
+		0,
+		PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
+		PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
+	},
+	/* DP2 to HDMI1/DP */
+	{
+		DESCRIPTOR_TERMINATE_LIST,
+		PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19),
+		PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3)
+	},
+};
+
+PCIe_COMPLEX_DESCRIPTOR Kabini = {
+        DESCRIPTOR_TERMINATE_LIST,
+        0,
+        PortList,
+        DdiList
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  OemCustomizeInitEarly
+ *
+ *  Description:
+ *    This is the stub function will call the host environment through the binary block
+ *    interface (call-out port) to provide a user hook opportunity
+ *
+ *  Parameters:
+ *    @param[in]      **PeiServices
+ *    @param[in]      *InitEarly
+ *
+ *    @retval         VOID
+ *
+ **/
+/*---------------------------------------------------------------------------------------*/
+VOID
+OemCustomizeInitEarly (
+	IN  OUT AMD_EARLY_PARAMS    *InitEarly
+	)
+{
+	AGESA_STATUS         Status;
+	VOID                 *KabiniPcieComplexListPtr;
+	VOID                 *KabiniPciePortPtr;
+	VOID                 *KabiniPcieDdiPtr;
+
+	ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+	/* GNB PCIe topology Porting */
+
+	/*  */
+	/* Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR */
+	/*  */
+	AllocHeapParams.RequestedBufferSize = sizeof(Kabini) + sizeof(PortList) + sizeof(DdiList);
+
+	AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START;
+	AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+	Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader);
+	if ( Status!= AGESA_SUCCESS) {
+		/* Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR */
+		ASSERT(FALSE);
+		return;
+	}
+
+	KabiniPcieComplexListPtr  =  (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+
+	AllocHeapParams.BufferPtr += sizeof(Kabini);
+	KabiniPciePortPtr         =  (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr;
+
+	AllocHeapParams.BufferPtr += sizeof(PortList);
+	KabiniPcieDdiPtr          =  (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+
+	LibAmdMemFill (KabiniPcieComplexListPtr,
+		       0,
+		       sizeof (Kabini),
+		       &InitEarly->StdHeader);
+
+	LibAmdMemFill (KabiniPciePortPtr,
+		       0,
+		       sizeof (PortList),
+		       &InitEarly->StdHeader);
+
+	LibAmdMemFill (KabiniPcieDdiPtr,
+		       0,
+		       sizeof (DdiList),
+		       &InitEarly->StdHeader);
+
+	LibAmdMemCopy  (KabiniPcieComplexListPtr, &Kabini, sizeof (Kabini), &InitEarly->StdHeader);
+	LibAmdMemCopy  (KabiniPciePortPtr, &PortList[0], sizeof (PortList), &InitEarly->StdHeader);
+	LibAmdMemCopy  (KabiniPcieDdiPtr, &DdiList[0], sizeof (DdiList), &InitEarly->StdHeader);
+
+	((PCIe_COMPLEX_DESCRIPTOR*)KabiniPcieComplexListPtr)->PciePortList =  (PCIe_PORT_DESCRIPTOR*)KabiniPciePortPtr;
+	((PCIe_COMPLEX_DESCRIPTOR*)KabiniPcieComplexListPtr)->DdiLinkList  =  (PCIe_DDI_DESCRIPTOR*)KabiniPcieDdiPtr;
+
+	InitEarly->GnbConfig.PcieComplexList = KabiniPcieComplexListPtr;
+}
diff --git a/src/mainboard/amd/olivehill/PlatformGnbPcieComplex.h b/src/mainboard/amd/olivehill/PlatformGnbPcieComplex.h
new file mode 100644
index 0000000..1db8b2d
--- /dev/null
+++ b/src/mainboard/amd/olivehill/PlatformGnbPcieComplex.h
@@ -0,0 +1,32 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H
+#define _PLATFORM_GNB_PCIE_COMPLEX_H
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+
+VOID
+OemCustomizeInitEarly (
+  IN  OUT AMD_EARLY_PARAMS    *InitEarly
+  );
+
+#endif //_PLATFORM_GNB_PCIE_COMPLEX_H
diff --git a/src/mainboard/amd/olivehill/acpi/AmdImc.asl b/src/mainboard/amd/olivehill/acpi/AmdImc.asl
new file mode 100644
index 0000000..074dd7c
--- /dev/null
+++ b/src/mainboard/amd/olivehill/acpi/AmdImc.asl
@@ -0,0 +1,114 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+//BTDC Due to IMC Fan, ACPI control codes
+OperationRegion(IMIO, SystemIO, 0x3E, 0x02)
+Field(IMIO , ByteAcc, NoLock, Preserve) {
+	IMCX,8,
+	IMCA,8
+}
+
+IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) {
+	Offset(0x80),
+	MSTI, 8,
+	MITS, 8,
+	MRG0, 8,
+	MRG1, 8,
+	MRG2, 8,
+	MRG3, 8,
+}
+
+Method(WACK, 0)
+{
+	Store(0, Local0)
+	While (LNotEqual(Local0, 0xFA)) {
+		Store(MRG0, Local0)
+		Sleep(10)
+	}
+}
+
+//Init
+Method (ITZE, 0)
+{
+	Store(0, MRG0)
+	Store(0xB5, MRG1)
+	Store(0, MRG2)
+	Store(0x96, MSTI)
+	WACK()
+
+	Store(0, MRG0)
+	Store(0, MRG1)
+	Store(0, MRG2)
+	Store(0x80, MSTI)
+	WACK()
+
+	Or(MRG2, 0x01, Local0)
+
+	Store(0, MRG0)
+	Store(0, MRG1)
+	Store(Local0, MRG2)
+	Store(0x81, MSTI)
+	WACK()
+}
+
+//Sleep
+Method (IMSP, 0)
+{
+	Store(0, MRG0)
+	Store(0xB5, MRG1)
+	Store(0, MRG2)
+	Store(0x96, MSTI)
+	WACK()
+
+	Store(0, MRG0)
+	Store(1, MRG1)
+	Store(0, MRG2)
+	Store(0x98, MSTI)
+	WACK()
+
+	Store(0, MRG0)
+	Store(0xB4, MRG1)
+	Store(0, MRG2)
+	Store(0x96, MSTI)
+	WACK()
+}
+
+//Wake
+Method (IMWK, 0)
+{
+	Store(0, MRG0)
+	Store(0xB5, MRG1)
+	Store(0, MRG2)
+	Store(0x96, MSTI)
+	WACK()
+
+	Store(0, MRG0)
+	Store(0, MRG1)
+	Store(0, MRG2)
+	Store(0x80, MSTI)
+	WACK()
+
+	Or(MRG2, 0x01, Local0)
+
+	Store(0, MRG0)
+	Store(0, MRG1)
+	Store(Local0, MRG2)
+	Store(0x81, MSTI)
+	WACK()
+}
diff --git a/src/mainboard/amd/olivehill/acpi/ide.asl b/src/mainboard/amd/olivehill/acpi/ide.asl
new file mode 100644
index 0000000..739f783
--- /dev/null
+++ b/src/mainboard/amd/olivehill/acpi/ide.asl
@@ -0,0 +1,246 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(IDEC) {
+			Name(_ADR, 0x00140001)
+			#include "ide.asl"
+		}
+	}
+}
+*/
+
+/* Some timing tables */
+Name(UDTT, Package(){                   /* Udma timing table */
+	120, 90, 60, 45, 30, 20, 15, 0      /* UDMA modes 0 -> 6 */
+})
+
+Name(MDTT, Package(){                   /* MWDma timing table */
+	480, 150, 120, 0                    /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(POTT, Package(){                   /* Pio timing table */
+	600, 390, 270, 180, 120, 0          /* PIO modes 0 -> 4 */
+})
+
+/* Some timing register value tables */
+Name(MDRT, Package(){                   /* MWDma timing register table */
+	0x77, 0x21, 0x20, 0xFF              /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(PORT, Package(){
+	0x99, 0x47, 0x34, 0x22, 0x20, 0x99  /* PIO modes 0 -> 4 */
+})
+
+OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
+	Field(ICRG, AnyAcc, NoLock, Preserve)
+{
+	PPTS, 8,                            /* Primary PIO Slave Timing */
+	PPTM, 8,                            /* Primary PIO Master Timing */
+	OFFSET(0x04), PMTS, 8,              /* Primary MWDMA Slave Timing */
+	PMTM, 8,                            /* Primary MWDMA Master Timing */
+	OFFSET(0x08), PPCR, 8,              /* Primary PIO Control */
+	OFFSET(0x0A), PPMM, 4,              /* Primary PIO master Mode */
+	PPSM, 4,                            /* Primary PIO slave Mode */
+	OFFSET(0x14), PDCR, 2,              /* Primary UDMA Control */
+	OFFSET(0x16), PDMM, 4,              /* Primary UltraDMA Mode */
+	PDSM, 4,                            /* Primary UltraDMA Mode */
+}
+
+Method(GTTM, 1)                         /* get total time*/
+{
+	Store(And(Arg0, 0x0F), Local0)      /* Recovery Width */
+	Increment(Local0)
+	Store(ShiftRight(Arg0, 4), Local1)  /* Command Width */
+	Increment(Local1)
+	Return(Multiply(30, Add(Local0, Local1)))
+}
+
+Device(PRID)
+{
+	Name (_ADR, Zero)
+	Method(_GTM, 0)
+	{
+		NAME(OTBF, Buffer(20) {         /* out buffer */
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+		})
+
+		CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
+		CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
+		CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
+		CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
+		CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
+
+		/* Just return if the channel is disabled */
+		If(And(PPCR, 0x01)) {           /* primary PIO control */
+			Return(OTBF)
+		}
+
+		/* Always tell them independent timing available and IOChannelReady used on both drives */
+		Or(BFFG, 0x1A, BFFG)
+
+		/* save total time of primary PIO master timing to PIO spd0 */
+		Store(GTTM(PPTM), PSD0)
+		/* save total time of primary PIO slave Timing to PIO spd1 */
+		Store(GTTM(PPTS), PSD1)
+
+		If(And(PDCR, 0x01)) {           /* It's under UDMA mode */
+			Or(BFFG, 0x01, BFFG)
+			Store(DerefOf(Index(UDTT, PDMM)), DSD0)
+		}
+		Else {
+			Store(GTTM(PMTM), DSD0)     /* Primary MWDMA Master Timing, DmaSpd0 */
+		}
+
+		If(And(PDCR, 0x02)) {           /* It's under UDMA mode */
+			Or(BFFG, 0x04, BFFG)
+			Store(DerefOf(Index(UDTT, PDSM)), DSD1)
+		}
+		Else {
+			Store(GTTM(PMTS), DSD1)     /* Primary MWDMA Slave Timing,  DmaSpd0 */
+		}
+
+		Return(OTBF)                    /* out buffer */
+	}                                   /* End Method(_GTM) */
+
+	Method(_STM, 3, NotSerialized)
+	{
+		NAME(INBF, Buffer(20) {         /* in buffer */
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+		})
+
+		CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
+		CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
+		CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
+		CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
+		CreateDwordField(INBF, 16, BFFG) /*buffer flag */
+
+		Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
+		Divide(Local0, 5, PPMM,)        /* Primary PIO master Mode */
+		Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
+		Divide(Local1, 5, PPSM,)        /* Primary PIO slave Mode */
+
+		Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
+		Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
+
+		If(And(BFFG, 0x01)) {           /* Drive 0 is under UDMA mode */
+			Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
+			Divide(Local0, 7, PDMM,)
+			Or(PDCR, 0x01, PDCR)
+		}
+		Else {
+			If(LNotEqual(DSD0, 0xFFFFFFFF)) {
+				Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
+				Store(DerefOf(Index(MDRT, Local0)), PMTM)
+			}
+		}
+
+		If(And(BFFG, 0x04)) {           /* Drive 1 is under UDMA mode */
+			Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
+			Divide(Local0, 7, PDSM,)
+			Or(PDCR, 0x02, PDCR)
+		}
+		Else {
+			If(LNotEqual(DSD1, 0xFFFFFFFF)) {
+				Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
+				Store(DerefOf(Index(MDRT, Local0)), PMTS)
+			}
+		}
+		/* Return(INBF) */
+	}		/*End Method(_STM) */
+	Device(MST)
+	{
+		Name(_ADR, 0)
+		Method(_GTF) {
+			Name(CMBF, Buffer(21) {
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+			})
+			CreateByteField(CMBF, 1, POMD)
+			CreateByteField(CMBF, 8, DMMD)
+			CreateByteField(CMBF, 5, CMDA)
+			CreateByteField(CMBF, 12, CMDB)
+			CreateByteField(CMBF, 19, CMDC)
+
+			Store(0xA0, CMDA)
+			Store(0xA0, CMDB)
+			Store(0xA0, CMDC)
+
+			Or(PPMM, 0x08, POMD)
+
+			If(And(PDCR, 0x01)) {
+				Or(PDMM, 0x40, DMMD)
+			}
+			Else {
+				Store(Match
+				      (MDTT, MLE, GTTM(PMTM),
+				       MTR, 0, 0), Local0)
+				If(LLess(Local0, 3)) {
+					Or(0x20, Local0, DMMD)
+				}
+			}
+			Return(CMBF)
+		}
+	}                                   /* End Device(MST) */
+
+	Device(SLAV)
+	{
+		Name(_ADR, 1)
+		Method(_GTF) {
+			Name(CMBF, Buffer(21) {
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+			})
+			CreateByteField(CMBF, 1, POMD)
+			CreateByteField(CMBF, 8, DMMD)
+			CreateByteField(CMBF, 5, CMDA)
+			CreateByteField(CMBF, 12, CMDB)
+			CreateByteField(CMBF, 19, CMDC)
+
+			Store(0xB0, CMDA)
+			Store(0xB0, CMDB)
+			Store(0xB0, CMDC)
+
+			Or(PPSM, 0x08, POMD)
+
+			If(And(PDCR, 0x02)) {
+				Or(PDSM, 0x40, DMMD)
+			}
+			Else {
+				Store(Match
+				      (MDTT, MLE, GTTM(PMTS),
+				       MTR, 0, 0), Local0)
+				If(LLess(Local0, 3)) {
+					Or(0x20, Local0, DMMD)
+				}
+			}
+			Return(CMBF)
+		}
+	}                                   /* End Device(SLAV) */
+}
diff --git a/src/mainboard/amd/olivehill/acpi/routing.asl b/src/mainboard/amd/olivehill/acpi/routing.asl
new file mode 100644
index 0000000..9407c46
--- /dev/null
+++ b/src/mainboard/amd/olivehill/acpi/routing.asl
@@ -0,0 +1,200 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "routing.asl"
+	}
+*/
+
+/* Routing is in System Bus scope */
+Scope(\_SB) {
+	Name(PR0, Package(){
+		/* NB devices */
+		/* Bus 0, Dev 0 - F16 Host Controller */
+
+		/* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+		/* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */
+		Package(){0x0001FFFF, 0, INTB, 0 },
+		Package(){0x0001FFFF, 1, INTC, 0 },
+
+
+		/* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */
+		Package(){0x0002FFFF, 0, INTC, 0 },
+		Package(){0x0002FFFF, 1, INTD, 0 },
+		Package(){0x0002FFFF, 2, INTA, 0 },
+		Package(){0x0002FFFF, 3, INTB, 0 },
+
+		/* FCH devices */
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */
+		Package(){0x0014FFFF, 0, INTA, 0 },
+		Package(){0x0014FFFF, 1, INTB, 0 },
+		Package(){0x0014FFFF, 2, INTC, 0 },
+		Package(){0x0014FFFF, 3, INTD, 0 },
+
+		/* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */
+		/* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */
+		Package(){0x0012FFFF, 0, INTC, 0 },
+		Package(){0x0012FFFF, 1, INTB, 0 },
+
+		Package(){0x0013FFFF, 0, INTC, 0 },
+		Package(){0x0013FFFF, 1, INTB, 0 },
+
+		Package(){0x0016FFFF, 0, INTC, 0 },
+		Package(){0x0016FFFF, 1, INTB, 0 },
+
+		/* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+		Package(){0x0010FFFF, 0, INTC, 0 },
+		Package(){0x0010FFFF, 1, INTB, 0 },
+
+		/* Bus 0, Dev 17 - SATA controller */
+		Package(){0x0011FFFF, 0, INTD, 0 },
+
+	})
+
+	Name(APR0, Package(){
+		/* NB devices in APIC mode */
+		/* Bus 0, Dev 0 - F15 Host Controller */
+
+		/* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+		Package(){0x0001FFFF, 0, 0, 17 },
+		Package(){0x0001FFFF, 1, 0, 18 },
+
+		/* Bus 0, Dev 2 - PCIe Bridges  */
+		Package(){0x0002FFFF, 0, 0, 18 },
+		Package(){0x0002FFFF, 1, 0, 19 },
+		Package(){0x0002FFFF, 2, 0, 16 },
+		Package(){0x0002FFFF, 3, 0, 17 },
+
+
+		/* SB devices in APIC mode */
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */
+		Package(){0x0014FFFF, 0, 0, 16 },
+		Package(){0x0014FFFF, 1, 0, 17 },
+		Package(){0x0014FFFF, 2, 0, 18 },
+		Package(){0x0014FFFF, 3, 0, 19 },
+
+		/* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */
+		/* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */
+		Package(){0x0012FFFF, 0, 0, 18 },
+		Package(){0x0012FFFF, 1, 0, 17 },
+
+		Package(){0x0013FFFF, 0, 0, 18 },
+		Package(){0x0013FFFF, 1, 0, 17 },
+
+		Package(){0x0016FFFF, 0, 0, 18 },
+		Package(){0x0016FFFF, 1, 0, 17 },
+
+		/* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+		Package(){0x0010FFFF, 0, 0, 0x12},
+		Package(){0x0010FFFF, 1, 0, 0x11},
+
+		/* Bus 0, Dev 17 - SATA controller */
+		Package(){0x0011FFFF, 0, 0, 19 },
+
+	})
+
+	Name(PS2, Package(){
+		Package(){0x0000FFFF, 0, INTC, 0 },
+		Package(){0x0000FFFF, 1, INTD, 0 },
+		Package(){0x0000FFFF, 2, INTA, 0 },
+		Package(){0x0000FFFF, 3, INTB, 0 },
+	})
+	Name(APS2, Package(){
+		Package(){0x0000FFFF, 0, 0, 18 },
+		Package(){0x0000FFFF, 1, 0, 19 },
+		Package(){0x0000FFFF, 2, 0, 16 },
+		Package(){0x0000FFFF, 3, 0, 17 },
+	})
+
+	/* GFX */
+	Name(PS4, Package(){
+		Package(){0x0000FFFF, 0, INTA, 0 },
+		Package(){0x0000FFFF, 1, INTB, 0 },
+		Package(){0x0000FFFF, 2, INTC, 0 },
+		Package(){0x0000FFFF, 3, INTD, 0 },
+	})
+	Name(APS4, Package(){
+		/* PCIe slot - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, 0, 16 },
+		Package(){0x0000FFFF, 1, 0, 17 },
+		Package(){0x0000FFFF, 2, 0, 18 },
+		Package(){0x0000FFFF, 3, 0, 19 },
+	})
+
+	/* GPP 0 */
+	Name(PS5, Package(){
+		Package(){0x0000FFFF, 0, INTB, 0 },
+		Package(){0x0000FFFF, 1, INTC, 0 },
+		Package(){0x0000FFFF, 2, INTD, 0 },
+		Package(){0x0000FFFF, 3, INTA, 0 },
+	})
+	Name(APS5, Package(){
+		Package(){0x0000FFFF, 0, 0, 17 },
+		Package(){0x0000FFFF, 1, 0, 18 },
+		Package(){0x0000FFFF, 2, 0, 19 },
+		Package(){0x0000FFFF, 3, 0, 16 },
+	})
+
+	/* GPP 1 */
+	Name(PS6, Package(){
+		Package(){0x0000FFFF, 0, INTC, 0 },
+		Package(){0x0000FFFF, 1, INTD, 0 },
+		Package(){0x0000FFFF, 2, INTA, 0 },
+		Package(){0x0000FFFF, 3, INTB, 0 },
+	})
+	Name(APS6, Package(){
+		Package(){0x0000FFFF, 0, 0, 18 },
+		Package(){0x0000FFFF, 1, 0, 19 },
+		Package(){0x0000FFFF, 2, 0, 16 },
+		Package(){0x0000FFFF, 3, 0, 17 },
+	})
+
+	/* GPP 2 */
+	Name(PS7, Package(){
+		Package(){0x0000FFFF, 0, INTD, 0 },
+		Package(){0x0000FFFF, 1, INTA, 0 },
+		Package(){0x0000FFFF, 2, INTB, 0 },
+		Package(){0x0000FFFF, 3, INTC, 0 },
+	})
+	Name(APS7, Package(){
+		Package(){0x0000FFFF, 0, 0, 19 },
+		Package(){0x0000FFFF, 1, 0, 16 },
+		Package(){0x0000FFFF, 2, 0, 17 },
+		Package(){0x0000FFFF, 3, 0, 18 },
+	})
+
+	/* GPP 3 */
+	Name(PS8, Package(){
+		Package(){0x0000FFFF, 0, INTA, 0 },
+		Package(){0x0000FFFF, 1, INTB, 0 },
+		Package(){0x0000FFFF, 2, INTC, 0 },
+		Package(){0x0000FFFF, 3, INTD, 0 },
+	})
+	Name(APS8, Package(){
+		Package(){0x0000FFFF, 0, 0, 16 },
+		Package(){0x0000FFFF, 1, 0, 17 },
+		Package(){0x0000FFFF, 2, 0, 18 },
+		Package(){0x0000FFFF, 3, 0, 19 },
+	})
+
+
+}
diff --git a/src/mainboard/amd/olivehill/acpi/sata.asl b/src/mainboard/amd/olivehill/acpi/sata.asl
new file mode 100644
index 0000000..8fd9e9b
--- /dev/null
+++ b/src/mainboard/amd/olivehill/acpi/sata.asl
@@ -0,0 +1,148 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* simple name description */
+
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(SATA) {
+			Name(_ADR, 0x00110000)
+			#include "sata.asl"
+		}
+	}
+}
+*/
+
+Name(STTM, Buffer(20) {
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+	\_GPE._L1F()
+}
+
+Device(PMRY)
+{
+	Name(_ADR, 0)
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(PMST) {
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P0IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return  (0x00) /* sata is missing */
+			}
+		}
+	}/* end of PMST */
+
+	Device(PSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P1IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	}	/* end of PSLA */
+}   /* end of PMRY */
+
+Device(SEDY)
+{
+	Name(_ADR, 1)		/* IDE Scondary Channel */
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(SMST)
+	{
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P2IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SMST */
+
+	Device(SSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P3IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SSLA */
+}   /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+	Method(_L1F,0x0,NotSerialized) {
+		if (\_SB.P0PR) {
+			if (LGreater(\_SB.P0IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P0PR)
+		}
+
+		if (\_SB.P1PR) {
+			if (LGreater(\_SB.P1IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P1PR)
+		}
+
+		if (\_SB.P2PR) {
+			if (LGreater(\_SB.P2IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P2PR)
+		}
+
+		if (\_SB.P3PR) {
+			if (LGreater(\_SB.P3IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P3PR)
+		}
+	}
+}
diff --git a/src/mainboard/amd/olivehill/acpi/usb.asl b/src/mainboard/amd/olivehill/acpi/usb.asl
new file mode 100644
index 0000000..7780a15
--- /dev/null
+++ b/src/mainboard/amd/olivehill/acpi/usb.asl
@@ -0,0 +1,114 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "usb.asl"
+	}
+*/
+Method(UCOC, 0) {
+	Sleep(20)
+	Store(0x13,CMTI)
+	Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+	Scope (\_GPE) {
+		Method (_L13) {
+		}
+	}
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+	Scope (\_GPE) {
+		Method (_L14) {
+		}
+	}
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+	Scope (\_GPE) {
+		Method (_L15) {
+		}
+	}
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+	Scope (\_GPE) {
+		Method (_L16) {
+		}
+	}
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+	Scope (\_GPE) {
+		Method (_L19) {
+		}
+	}
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+If (LLessEqual(UOM5,9)) {
+	Scope (\_GPE) {
+		Method (_L1A) {
+		}
+	}
+}
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1C) { */
+		Method (_L06) {
+		}
+	}
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1D) { */
+		Method (_L07) {
+		}
+	}
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+	Scope (\_GPE) {
+		Method (_L17) {
+		}
+	}
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+	Scope (\_GPE) {
+		Method (_L0E) {
+		}
+	}
+}
diff --git a/src/mainboard/amd/olivehill/acpi_tables.c b/src/mainboard/amd/olivehill/acpi_tables.c
new file mode 100644
index 0000000..b5ae758
--- /dev/null
+++ b/src/mainboard/amd/olivehill/acpi_tables.c
@@ -0,0 +1,333 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include "agesawrapper.h"
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam16.h>
+
+#include "agesawrapper.h"
+
+#define DUMP_ACPI_TABLES 0
+
+#if DUMP_ACPI_TABLES == 1
+
+static void dump_mem(u32 start, u32 end)
+{
+	u32 i;
+	print_debug("dump_mem:");
+	for (i = start; i < end; i++) {
+		if ((i & 0xf) == 0) {
+			printk(BIOS_DEBUG, "\n%08x:", i);
+		}
+		printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
+	}
+	print_debug("\n");
+}
+#endif
+
+extern const unsigned char AmlCode[];
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+	/* Just a dummy */
+	return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+	/* create all subtables for processors */
+	current = acpi_create_madt_lapics(current);
+
+	/* Write SB800 IOAPIC, only one */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS,
+					   IO_APIC_ADDR, 0);
+
+	/* TODO: Remove the hardcode */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1,
+					   0xFEC20000, 24);
+
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+						current, 0, 0, 2, 0);
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+						current, 0, 9, 9, 0xF);
+	/* 0: mean bus 0--->ISA */
+	/* 0: PIC 0 */
+	/* 2: APIC 2 */
+	/* 5 mean: 0101 --> Edige-triggered, Active high */
+
+	/* create all subtables for processors */
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1);
+	/* 1: LINT1 connect to NMI */
+
+	return current;
+}
+
+unsigned long acpi_fill_hest(acpi_hest_t *hest)
+{
+	void *addr, *current;
+
+	/* Skip the HEST header. */
+	current = (void *)(hest + 1);
+
+	addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE);
+	if (addr != NULL)
+		current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
+
+	addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC);
+	if (addr != NULL)
+		current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
+
+	return (unsigned long)current;
+}
+
+unsigned long acpi_fill_slit(unsigned long current)
+{
+	/* Not implemented */
+	return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+	/* No NUMA, no SRAT */
+	return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id)
+{
+	int lens;
+	msr_t msr;
+	char pscope[] = "\\_SB.PCI0";
+
+	lens = acpigen_write_scope(pscope);
+	msr = rdmsr(TOP_MEM);
+	lens += acpigen_write_name_dword("TOM1", msr.lo);
+	msr = rdmsr(TOP_MEM2);
+	/*
+	 * Since XP only implements parts of ACPI 2.0, we can't use a qword
+	 * here.
+	 * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt
+	 * slide 22ff.
+	 * Shift value right by 20 bit to make it fit into 32bit,
+	 * giving us 1MB granularity and a limit of almost 4Exabyte of memory.
+	 */
+	lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20);
+	acpigen_patch_len(lens - 1);
+	return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+	unsigned long current;
+	acpi_rsdp_t *rsdp;
+	acpi_rsdt_t *rsdt;
+	acpi_hpet_t *hpet;
+	acpi_madt_t *madt;
+	acpi_srat_t *srat;
+	acpi_slit_t *slit;
+	acpi_fadt_t *fadt;
+	acpi_facs_t *facs;
+	acpi_header_t *dsdt;
+	acpi_header_t *ssdt;
+	acpi_header_t *alib;
+	acpi_header_t *ivrs;
+	acpi_hest_t *hest;
+
+	get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
+
+	/* Align ACPI tables to 16 bytes */
+	start = ALIGN(start, 16);
+	current = start;
+
+	printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
+
+	/* We need at least an RSDP and an RSDT Table */
+	rsdp = (acpi_rsdp_t *) current;
+	current += sizeof(acpi_rsdp_t);
+	rsdt = (acpi_rsdt_t *) current;
+	current += sizeof(acpi_rsdt_t);
+
+	/* clear all table memory */
+	memset((void *)start, 0, current - start);
+
+	acpi_write_rsdp(rsdp, rsdt, NULL);
+	acpi_write_rsdt(rsdt);
+
+	/* DSDT */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:    * DSDT at %lx\n", current);
+	dsdt = (acpi_header_t *)current; /* it will used by fadt */
+	memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
+	current += dsdt->length;
+	memcpy(dsdt, &AmlCode, dsdt->length);
+	printk(BIOS_DEBUG, "ACPI:    * DSDT @ %p Length %x\n",dsdt,dsdt->length);
+
+	/* FACS */ /* it needs 64 bit alignment */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current);
+	facs = (acpi_facs_t *) current; /* it will be used by fadt */
+	current += sizeof(acpi_facs_t);
+	acpi_create_facs(facs);
+
+	/* FADT */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:  * FADT at %lx\n", current);
+	fadt = (acpi_fadt_t *) current;
+	current += sizeof(acpi_fadt_t);
+
+	acpi_create_fadt(fadt, facs, dsdt);
+	acpi_add_table(rsdp, fadt);
+
+	/*
+	 * We explicitly add these tables later on:
+	 */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:  * HPET at %lx\n", current);
+	hpet = (acpi_hpet_t *) current;
+	current += sizeof(acpi_hpet_t);
+	acpi_create_hpet(hpet);
+	acpi_add_table(rsdp, hpet);
+
+	/* If we want to use HPET Timers Linux wants an MADT */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:  * MADT at %lx\n",current);
+	madt = (acpi_madt_t *) current;
+	acpi_create_madt(madt);
+	current += madt->header.length;
+	acpi_add_table(rsdp, madt);
+
+	/* HEST */
+	current = ALIGN(current, 8);
+	hest = (acpi_hest_t *)current;
+	acpi_write_hest((void *)current);
+	acpi_add_table(rsdp, (void *)current);
+	current += ((acpi_header_t *)current)->length;
+
+	current   = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:    * IVRS at %lx\n", current);
+	ivrs = agesawrapper_getlateinitptr(PICK_IVRS);
+	if (ivrs != NULL) {
+		memcpy((void *)current, ivrs, ivrs->length);
+		ivrs = (acpi_header_t *) current;
+		current += ivrs->length;
+		acpi_add_table(rsdp, ivrs);
+	} else {
+		printk(BIOS_DEBUG, "  AGESA IVRS table NULL. Skipping.\n");
+	}
+
+	/* SRAT */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:    * SRAT at %lx\n", current);
+	srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT);
+	if (srat != NULL) {
+		memcpy((void *)current, srat, srat->header.length);
+		srat = (acpi_srat_t *) current;
+		current += srat->header.length;
+		acpi_add_table(rsdp, srat);
+	} else {
+		printk(BIOS_DEBUG, "  AGESA SRAT table NULL. Skipping.\n");
+	}
+
+	/* SLIT */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:   * SLIT at %lx\n", current);
+	slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT);
+	if (slit != NULL) {
+		memcpy((void *)current, slit, slit->header.length);
+		slit = (acpi_slit_t *) current;
+		current += slit->header.length;
+		acpi_add_table(rsdp, slit);
+	} else {
+		printk(BIOS_DEBUG, "  AGESA SLIT table NULL. Skipping.\n");
+	}
+
+	/* ALIB */
+	current = ALIGN(current, 16);
+	printk(BIOS_DEBUG, "ACPI:  * AGESA ALIB SSDT at %lx\n", current);
+	alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB);
+	if (alib != NULL) {
+		memcpy((void *)current, alib, alib->length);
+		alib = (acpi_header_t *) current;
+		current += alib->length;
+		acpi_add_table(rsdp, (void *)alib);
+	}
+	else {
+		printk(BIOS_DEBUG, "	AGESA ALIB SSDT table NULL. Skipping.\n");
+	}
+
+	/* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */
+	/* SSDT */
+	current   = ALIGN(current, 16);
+	printk(BIOS_DEBUG, "ACPI:    * SSDT at %lx\n", current);
+	ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE);
+	if (ssdt != NULL) {
+		memcpy((void *)current, ssdt, ssdt->length);
+		ssdt = (acpi_header_t *) current;
+		current += ssdt->length;
+	}
+	else {
+		printk(BIOS_DEBUG, "  AGESA PState table NULL. Skipping.\n");
+	}
+	acpi_add_table(rsdp,ssdt);
+
+	printk(BIOS_DEBUG, "ACPI:    * SSDT for PState at %lx\n", current);
+
+	printk(BIOS_DEBUG, "ACPI:    * SSDT\n");
+	ssdt = (acpi_header_t *)current;
+
+	acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR);
+	current += ssdt->length;
+	acpi_add_table(rsdp, ssdt);
+
+#if DUMP_ACPI_TABLES == 1
+	printk(BIOS_DEBUG, "rsdp\n");
+	dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
+
+	printk(BIOS_DEBUG, "rsdt\n");
+	dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+
+	printk(BIOS_DEBUG, "madt\n");
+	dump_mem(madt, ((void *)madt) + madt->header.length);
+
+	printk(BIOS_DEBUG, "srat\n");
+	dump_mem(srat, ((void *)srat) + srat->header.length);
+
+	printk(BIOS_DEBUG, "slit\n");
+	dump_mem(slit, ((void *)slit) + slit->header.length);
+
+	printk(BIOS_DEBUG, "ssdt\n");
+	dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
+
+	printk(BIOS_DEBUG, "fadt\n");
+	dump_mem(fadt, ((void *)fadt) + fadt->header.length);
+
+	printk(BIOS_DEBUG, "hest\n");
+	dump_mem(hest, ((void *)hest) + hest->header.length);
+#endif
+
+	printk(BIOS_INFO, "ACPI: done.\n");
+	return current;
+}
diff --git a/src/mainboard/amd/olivehill/agesawrapper.c b/src/mainboard/amd/olivehill/agesawrapper.c
new file mode 100644
index 0000000..06405ad
--- /dev/null
+++ b/src/mainboard/amd/olivehill/agesawrapper.c
@@ -0,0 +1,771 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include "agesawrapper.h"
+#include "BiosCallOuts.h"
+#include "cpuRegisters.h"
+#include "cpuCacheInit.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "Dispatcher.h"
+#include "cpuCacheInit.h"
+#include "amdlib.h"
+#include "PlatformGnbPcieComplex.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "Fch.h"
+#include <cpu/amd/agesa/s3_resume.h>
+#include <cbmem.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+
+VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr);
+VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr);
+
+#define FILECODE UNASSIGNED_FILE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* ACPI table pointers returned by AmdInitLate */
+VOID *DmiTable    = NULL;
+VOID *AcpiPstate  = NULL;
+VOID *AcpiSrat    = NULL;
+VOID *AcpiSlit    = NULL;
+
+VOID *AcpiWheaMce = NULL;
+VOID *AcpiWheaCmc = NULL;
+VOID *AcpiAlib    = NULL;
+VOID *AcpiIvrs    = NULL;
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+UINT32
+agesawrapper_amdinitcpuio (
+	VOID
+	)
+{
+	AGESA_STATUS                  Status;
+	UINT64                        MsrReg;
+	UINT32                        PciData;
+	PCI_ADDR                      PciAddress;
+	AMD_CONFIG_PARAMS             StdHeader;
+
+	/* Enable legacy video routing: D18F1xF4 VGA Enable */
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4);
+	PciData = 1;
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+	/* The platform BIOS needs to ensure the memory ranges of SB800 legacy
+	 * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are
+	 * set to non-posted regions.
+	 */
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84);
+	PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */
+	PciData |= 1 << 7;    /* set NP (non-posted) bit */
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80);
+	PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+	/* Map the remaining PCI hole as posted MMIO */
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C);
+	PciData = 0x00FECF00; /* last address before non-posted range */
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader);
+	MsrReg = (MsrReg >> 8) | 3;
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88);
+	PciData = (UINT32)MsrReg;
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+	/* Send all IO (0000-FFFF) to southbridge. */
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4);
+	PciData = 0x0000F000;
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0);
+	PciData = 0x00000003;
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	Status = AGESA_SUCCESS;
+	return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdinitmmio (
+	VOID
+	)
+{
+	AGESA_STATUS                  Status;
+	UINT64                        MsrReg;
+	UINT32                        PciData;
+	PCI_ADDR                      PciAddress;
+	AMD_CONFIG_PARAMS             StdHeader;
+
+	/*
+	  Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base
+	  Address MSR register.
+	*/
+	MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1;
+	LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader);
+
+	/*
+	  Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
+	*/
+	LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader);
+	MsrReg = MsrReg | 0x0000400000000000;
+	LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
+
+	/* For serial port */
+	PciData = 0xFF03FFD5;
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44);
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+	/* Set ROM cache onto WP to decrease post time */
+	MsrReg = (0x0100000000ull - CONFIG_ROM_SIZE) | 5ull;
+	LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader);
+	MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CONFIG_ROM_SIZE) | 0x800ull;
+	LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader);
+
+	Status = AGESA_SUCCESS;
+	return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdinitreset (
+	VOID
+	)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_RESET_PARAMS AmdResetParams;
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	LibAmdMemFill (&AmdResetParams,
+		       0,
+		       sizeof (AMD_RESET_PARAMS),
+		       &(AmdResetParams.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET;
+	AmdParamStruct.AllocationMethod = ByHost;
+	AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS);
+	AmdParamStruct.NewStructPtr = &AmdResetParams;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	AmdCreateStruct (&AmdParamStruct);
+	AmdResetParams.HtConfig.Depth = 0;
+#if !CONFIG_HUDSON_XHCI_ENABLE
+	AmdResetParams.FchInterface.Xhci0Enable = FALSE;
+#endif
+	AmdResetParams.FchInterface.Xhci1Enable = FALSE;
+
+	status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr);
+	if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct (&AmdParamStruct);
+	return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitearly (
+	VOID
+	)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_EARLY_PARAMS     *AmdEarlyParamsPtr;
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY;
+	AmdParamStruct.AllocationMethod = PreMemHeap;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	AmdCreateStruct (&AmdParamStruct);
+
+	AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr;
+	OemCustomizeInitEarly (AmdEarlyParamsPtr);
+
+	status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr);
+	if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct (&AmdParamStruct);
+
+	return (UINT32)status;
+}
+
+UINT32 GetHeapBase(
+	AMD_CONFIG_PARAMS *StdHeader
+	)
+{
+	UINT32 heap;
+
+#if CONFIG_HAVE_ACPI_RESUME
+	/* Both romstage and ramstage has this S3 detect. */
+	if (acpi_get_sleep_type() == 3)
+		heap = (UINT32)cbmem_find(CBMEM_ID_RESUME_SCRATCH) + (CONFIG_HIGH_SCRATCH_MEMORY_SIZE - BIOS_HEAP_SIZE); /* base + high_stack_size */
+	else
+#endif
+		heap = BIOS_HEAP_START_ADDRESS; /* Low mem */
+
+	return heap;
+}
+
+UINT32
+agesawrapper_amdinitpost (
+	VOID
+	)
+{
+	AGESA_STATUS status;
+	UINT16                  i;
+	UINT32          *HeadPtr;
+	AMD_INTERFACE_PARAMS  AmdParamStruct;
+	AMD_POST_PARAMS       *PostParams;
+	BIOS_HEAP_MANAGER    *BiosManagerPtr;
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_POST;
+	AmdParamStruct.AllocationMethod = PreMemHeap;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	AmdCreateStruct (&AmdParamStruct);
+	PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr;
+	status = AmdInitPost (PostParams);
+	if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus);
+	AmdReleaseStruct (&AmdParamStruct);
+	/* Initialize heap space */
+	BiosManagerPtr = (BIOS_HEAP_MANAGER *)GetHeapBase(&AmdParamStruct.StdHeader);
+
+	HeadPtr = (UINT32 *) ((UINT8 *) BiosManagerPtr + sizeof (BIOS_HEAP_MANAGER));
+	for (i = 0; i < ((BIOS_HEAP_SIZE/4) - (sizeof (BIOS_HEAP_MANAGER)/4)); i++)
+	{
+		*HeadPtr = 0x00000000;
+		HeadPtr++;
+	}
+	BiosManagerPtr->StartOfAllocatedNodes = 0;
+	BiosManagerPtr->StartOfFreedNodes = 0;
+
+	return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitenv (
+	VOID
+	)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_ENV_PARAMS       *EnvParam;
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	status = AmdCreateStruct (&AmdParamStruct);
+	EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr;
+
+	status = AmdInitEnv (EnvParam);
+	if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus);
+	/* Initialize Subordinate Bus Number and Secondary Bus Number
+	 * In platform BIOS this address is allocated by PCI enumeration code
+	 Modify D1F0x18
+	*/
+
+	return (UINT32)status;
+}
+
+VOID *
+agesawrapper_getlateinitptr (
+	int pick
+	)
+{
+	switch (pick) {
+	case PICK_DMI:
+		return DmiTable;
+	case PICK_PSTATE:
+		return AcpiPstate;
+	case PICK_SRAT:
+		return AcpiSrat;
+	case PICK_SLIT:
+		return AcpiSlit;
+	case PICK_WHEA_MCE:
+		return AcpiWheaMce;
+	case PICK_WHEA_CMC:
+		return AcpiWheaCmc;
+	case PICK_ALIB:
+		return AcpiAlib;
+	case PICK_IVRS:
+		return AcpiIvrs;
+	default:
+		return NULL;
+	}
+}
+
+UINT32
+agesawrapper_amdinitmid (
+	VOID
+	)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+
+	/* Enable MMIO on AMD CPU Address Map Controller */
+	agesawrapper_amdinitcpuio ();
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_MID;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	AmdCreateStruct (&AmdParamStruct);
+
+	((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */
+	status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr);
+	if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct (&AmdParamStruct);
+
+	return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitlate (
+	VOID
+	)
+{
+	AGESA_STATUS Status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_LATE_PARAMS *AmdLateParams;
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	/* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */
+	AmdCreateStruct(&AmdParamStruct);
+	AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr;
+	Status = AmdInitLate(AmdLateParams);
+	/* CDIT table is not created. */
+	if (Status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus);
+		ASSERT(Status == AGESA_SUCCESS);
+	}
+
+	DmiTable    = AmdLateParams->DmiTable;
+	AcpiPstate  = AmdLateParams->AcpiPState;
+	AcpiSrat    = AmdLateParams->AcpiSrat;
+	AcpiSlit    = AmdLateParams->AcpiSlit;
+
+	AcpiWheaMce = AmdLateParams->AcpiWheaMce;
+	AcpiWheaCmc = AmdLateParams->AcpiWheaCmc;
+	AcpiAlib    = AmdLateParams->AcpiAlib;
+	AcpiIvrs    = AmdLateParams->AcpiIvrs;
+
+	printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x,"
+	       "AcpiSlit:%x, Mce:%x, Cmc:%x,"
+	       "Alib:%x, AcpiIvrs:%x in %s\n",
+	       (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat,
+	       (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc,
+	       (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__);
+
+	/* AmdReleaseStruct (&AmdParamStruct); */
+	return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdlaterunaptask (
+	UINT32 Func,
+	UINT32 Data,
+	VOID *ConfigPtr
+	)
+{
+	AGESA_STATUS Status;
+	AP_EXE_PARAMS ApExeParams;
+
+	LibAmdMemFill (&ApExeParams,
+		       0,
+		       sizeof (AP_EXE_PARAMS),
+		       &(ApExeParams.StdHeader));
+
+	ApExeParams.StdHeader.AltImageBasePtr = 0;
+	ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	ApExeParams.StdHeader.Func = 0;
+	ApExeParams.StdHeader.ImageBasePtr = 0;
+	ApExeParams.FunctionNumber = Func;
+	ApExeParams.RelatedDataBlock = ConfigPtr;
+
+	Status = AmdLateRunApTask (&ApExeParams);
+	if (Status != AGESA_SUCCESS) {
+		/* agesawrapper_amdreadeventlog(); */
+		ASSERT(Status == AGESA_SUCCESS);
+	}
+
+	return (UINT32)Status;
+}
+
+#if CONFIG_HAVE_ACPI_RESUME
+
+UINT32 agesawrapper_amdinitresume(VOID)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_RESUME_PARAMS     *AmdResumeParamsPtr;
+	S3_DATA_TYPE            S3DataType;
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME;
+	AmdParamStruct.AllocationMethod = PreMemHeap;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	AmdCreateStruct (&AmdParamStruct);
+
+	AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr;
+
+	AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0;
+	AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0;
+	S3DataType = S3DataTypeNonVolatile;
+	OemAgesaGetS3Info (S3DataType,
+			   (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize,
+			   (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage);
+
+	status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr);
+
+	if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct (&AmdParamStruct);
+
+	return (UINT32)status;
+}
+
+#ifndef __PRE_RAM__
+
+extern FCH_DATA_BLOCK InitEnvCfgDefault;
+STATIC VOID s3_resume_init_data(FCH_DATA_BLOCK *FchParams)
+{
+	FchParams->Gpp.GppLinkConfig           = UserOptions.FchBldCfg->CfgFchGppLinkConfig;
+	FchParams->Gpp.PortCfg[0].PortPresent  = UserOptions.FchBldCfg->CfgFchGppPort0Present;
+	FchParams->Gpp.PortCfg[1].PortPresent  = UserOptions.FchBldCfg->CfgFchGppPort1Present;
+	FchParams->Gpp.PortCfg[2].PortPresent  = UserOptions.FchBldCfg->CfgFchGppPort2Present;
+	FchParams->Gpp.PortCfg[3].PortPresent  = UserOptions.FchBldCfg->CfgFchGppPort3Present;
+	FchParams->Gpp.PortCfg[0].PortHotPlug  = UserOptions.FchBldCfg->CfgFchGppPort0HotPlug;
+	FchParams->Gpp.PortCfg[1].PortHotPlug  = UserOptions.FchBldCfg->CfgFchGppPort1HotPlug;
+	FchParams->Gpp.PortCfg[2].PortHotPlug  = UserOptions.FchBldCfg->CfgFchGppPort2HotPlug;
+	FchParams->Gpp.PortCfg[3].PortHotPlug  = UserOptions.FchBldCfg->CfgFchGppPort3HotPlug;
+	FchParams->Gpp.GppFunctionEnable = TRUE; /* GppEnable */
+	FchParams->Gpp.GppPhyPllPowerDown = TRUE;
+	FchParams->Gpp.GppDynamicPowerSaving = TRUE;
+	FchParams->Gpp.UmiPhyPllPowerDown = TRUE;
+	FchParams->Gpp.NewGppAlgorithm = TRUE;
+	FchParams->Gpp.GppPortMinPollingTime = 40;
+
+	FchParams->Spi.SpiSpeed = 2;
+	FchParams->Ir.IrConfig = 3;
+
+	FchParams->HwAcpi.Smbus0BaseAddress    = UserOptions.FchBldCfg->CfgSmbus0BaseAddress;
+	FchParams->HwAcpi.Smbus1BaseAddress    = UserOptions.FchBldCfg->CfgSmbus1BaseAddress;
+	FchParams->HwAcpi.SioPmeBaseAddress    = UserOptions.FchBldCfg->CfgSioPmeBaseAddress;
+	FchParams->HwAcpi.AcpiPm1EvtBlkAddr    = UserOptions.FchBldCfg->CfgAcpiPm1EvtBlkAddr;
+	FchParams->HwAcpi.AcpiPm1CntBlkAddr    = UserOptions.FchBldCfg->CfgAcpiPm1CntBlkAddr;
+	FchParams->HwAcpi.AcpiPmTmrBlkAddr     = UserOptions.FchBldCfg->CfgAcpiPmTmrBlkAddr;
+	FchParams->HwAcpi.CpuControlBlkAddr    = UserOptions.FchBldCfg->CfgCpuControlBlkAddr;
+	FchParams->HwAcpi.AcpiGpe0BlkAddr      = UserOptions.FchBldCfg->CfgAcpiGpe0BlkAddr;
+	FchParams->HwAcpi.SmiCmdPortAddr       = UserOptions.FchBldCfg->CfgSmiCmdPortAddr;
+	FchParams->HwAcpi.AcpiPmaCntBlkAddr    = UserOptions.FchBldCfg->CfgAcpiPmaCntBlkAddr;
+	FchParams->HwAcpi.WatchDogTimerBase    = UserOptions.FchBldCfg->CfgWatchDogTimerBase;
+	FchParams->Sata.SataRaid5Ssid          = UserOptions.FchBldCfg->CfgSataRaid5Ssid;
+	FchParams->Sata.SataRaidSsid           = UserOptions.FchBldCfg->CfgSataRaidSsid;
+	FchParams->Sata.SataAhciSsid           = UserOptions.FchBldCfg->CfgSataAhciSsid;
+	FchParams->Sata.SataIdeSsid            = UserOptions.FchBldCfg->CfgSataIdeSsid;
+	FchParams->Spi.RomBaseAddress          = UserOptions.FchBldCfg->CfgSpiRomBaseAddress;
+	FchParams->Sd.SdSsid                   = UserOptions.FchBldCfg->CfgSdSsid;
+	FchParams->Spi.LpcSsid                 = UserOptions.FchBldCfg->CfgLpcSsid;
+	FchParams->Hpet.HpetBase               = UserOptions.FchBldCfg->CfgHpetBaseAddress;
+	FchParams->Azalia.AzaliaSsid           = UserOptions.FchBldCfg->CfgAzaliaSsid;
+	FchParams->Smbus.SmbusSsid             = UserOptions.FchBldCfg->CfgSmbusSsid;
+	FchParams->Ide.IdeSsid                 = UserOptions.FchBldCfg->CfgIdeSsid;
+	FchParams->Usb.EhciSsid                = UserOptions.FchBldCfg->CfgEhciSsid;
+	FchParams->Usb.OhciSsid                = UserOptions.FchBldCfg->CfgOhciSsid;
+	FchParams->Usb.XhciSsid                = UserOptions.FchBldCfg->CfgXhciSsid;
+	FchParams->Ir.IrPinControl             = UserOptions.FchBldCfg->CfgFchIrPinControl;
+	FchParams->Sd.SdClockControl           = UserOptions.FchBldCfg->CfgFchSdClockControl;
+}
+
+UINT32 agesawrapper_fchs3earlyrestore (VOID)
+{
+	AGESA_STATUS status = AGESA_SUCCESS;
+
+	FCH_DATA_BLOCK      FchParams;
+	AMD_CONFIG_PARAMS StdHeader;
+
+	StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+	StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10;
+	StdHeader.AltImageBasePtr = 0;
+	StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	StdHeader.Func = 0;
+	StdHeader.ImageBasePtr = 0;
+
+	FchParams = InitEnvCfgDefault;
+	FchParams.StdHeader = &StdHeader;
+	s3_resume_init_data(&FchParams);
+
+	FchInitS3EarlyRestore(&FchParams);
+
+	return status;
+}
+#endif
+
+UINT32 agesawrapper_amds3laterestore (VOID)
+{
+	AGESA_STATUS Status;
+	AMD_INTERFACE_PARAMS    AmdInterfaceParams;
+	AMD_S3LATE_PARAMS       AmdS3LateParams;
+	AMD_S3LATE_PARAMS       *AmdS3LateParamsPtr;
+	S3_DATA_TYPE          S3DataType;
+
+	agesawrapper_amdinitcpuio();
+	LibAmdMemFill (&AmdS3LateParams,
+		       0,
+		       sizeof (AMD_S3LATE_PARAMS),
+		       &(AmdS3LateParams.StdHeader));
+	AmdInterfaceParams.StdHeader.ImageBasePtr = 0;
+	AmdInterfaceParams.AllocationMethod = ByHost;
+	AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE;
+	AmdInterfaceParams.NewStructPtr = &AmdS3LateParams;
+	AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdS3LateParamsPtr = &AmdS3LateParams;
+	AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS);
+
+	AmdCreateStruct (&AmdInterfaceParams);
+
+	AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0;
+	S3DataType = S3DataTypeVolatile;
+
+	OemAgesaGetS3Info (S3DataType,
+			   (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize,
+			   (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage);
+
+	Status = AmdS3LateRestore (AmdS3LateParamsPtr);
+	if (Status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus);
+		ASSERT(Status == AGESA_SUCCESS);
+	}
+
+	return (UINT32)Status;
+}
+
+#ifndef __PRE_RAM__
+
+extern UINT8 picr_data[0x54], intr_data[0x54];
+
+UINT32 agesawrapper_fchs3laterestore (VOID)
+{
+	AGESA_STATUS status = AGESA_SUCCESS;
+
+	FCH_DATA_BLOCK      FchParams;
+	AMD_CONFIG_PARAMS StdHeader;
+	UINT8 byte;
+
+	StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+	StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10;
+	StdHeader.AltImageBasePtr = 0;
+	StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	StdHeader.Func = 0;
+	StdHeader.ImageBasePtr = 0;
+
+	FchParams = InitEnvCfgDefault;
+	FchParams.StdHeader = &StdHeader;
+	s3_resume_init_data(&FchParams);
+	FchInitS3LateRestore(&FchParams);
+	/* PIC IRQ routine */
+	for (byte = 0x0; byte < sizeof(picr_data); byte ++) {
+		outb(byte, 0xC00);
+		outb(picr_data[byte], 0xC01);
+	}
+
+	/* APIC IRQ routine */
+	for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+		outb(byte | 0x80, 0xC00);
+		outb(intr_data[byte], 0xC01);
+	}
+
+	return status;
+}
+#endif
+
+#ifndef __PRE_RAM__
+
+UINT32 agesawrapper_amdS3Save(VOID)
+{
+	AGESA_STATUS Status;
+	AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr;
+	AMD_INTERFACE_PARAMS  AmdInterfaceParams;
+	S3_DATA_TYPE          S3DataType;
+
+	LibAmdMemFill (&AmdInterfaceParams,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdInterfaceParams.StdHeader));
+
+	AmdInterfaceParams.StdHeader.ImageBasePtr = 0;
+	AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+	AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdInterfaceParams.AllocationMethod = PostMemDram;
+	AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE;
+	AmdInterfaceParams.StdHeader.AltImageBasePtr = 0;
+	AmdInterfaceParams.StdHeader.Func = 0;
+
+	AmdCreateStruct(&AmdInterfaceParams);
+	AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr;
+	AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader;
+
+	Status = AmdS3Save(AmdS3SaveParamsPtr);
+	if (Status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus);
+		ASSERT(Status == AGESA_SUCCESS);
+	}
+
+	S3DataType = S3DataTypeNonVolatile;
+	printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n",
+	       (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize,
+	       (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage);
+
+	Status = OemAgesaSaveS3Info (
+		S3DataType,
+		AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize,
+		AmdS3SaveParamsPtr->S3DataBlock.NvStorage);
+
+	printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n",
+	       (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize,
+	       (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage);
+
+	if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) {
+		S3DataType = S3DataTypeVolatile;
+
+		Status = OemAgesaSaveS3Info (
+			S3DataType,
+			AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize,
+			AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage);
+	}
+	OemAgesaSaveMtrr();
+
+	AmdReleaseStruct (&AmdInterfaceParams);
+
+	return (UINT32)Status;
+}
+
+#endif  /* #ifndef __PRE_RAM__ */
+#endif  /* CONFIG_HAVE_ACPI_RESUME */
+
+UINT32
+agesawrapper_amdreadeventlog (
+	UINT8 HeapStatus
+	)
+{
+	AGESA_STATUS Status;
+	EVENT_PARAMS AmdEventParams;
+
+	LibAmdMemFill (&AmdEventParams,
+		       0,
+		       sizeof (EVENT_PARAMS),
+		       &(AmdEventParams.StdHeader));
+
+	AmdEventParams.StdHeader.AltImageBasePtr = 0;
+	AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdEventParams.StdHeader.Func = 0;
+	AmdEventParams.StdHeader.ImageBasePtr = 0;
+	AmdEventParams.StdHeader.HeapStatus = HeapStatus;
+	Status = AmdReadEventLog (&AmdEventParams);
+	while (AmdEventParams.EventClass != 0) {
+		printk(BIOS_DEBUG,"\nEventLog:  EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo);
+		printk(BIOS_DEBUG,"  Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2);
+		printk(BIOS_DEBUG,"  Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4);
+		Status = AmdReadEventLog (&AmdEventParams);
+	}
+
+	return (UINT32)Status;
+}
diff --git a/src/mainboard/amd/olivehill/agesawrapper.h b/src/mainboard/amd/olivehill/agesawrapper.h
new file mode 100644
index 0000000..db893cd
--- /dev/null
+++ b/src/mainboard/amd/olivehill/agesawrapper.h
@@ -0,0 +1,97 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#ifndef _AGESAWRAPPER_H_
+#define _AGESAWRAPPER_H_
+
+#include <stdint.h>
+#include "Porting.h"
+#include "AGESA.h"
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+/* Define AMD Ontario APPU SSID/SVID */
+#define AMD_APU_SVID    0x1022
+#define AMD_APU_SSID    0x1234
+#define PCIE_BASE_ADDRESS   CONFIG_MMCONF_BASE_ADDRESS
+
+enum {
+	PICK_DMI,       /* DMI Interface */
+	PICK_PSTATE,    /* Acpi Pstate SSDT Table */
+	PICK_SRAT,      /* SRAT Table */
+	PICK_SLIT,      /* SLIT Table */
+	PICK_WHEA_MCE,  /* WHEA MCE table */
+	PICK_WHEA_CMC,  /* WHEA CMV table */
+	PICK_ALIB,      /* SACPI SSDT table with ALIB implementation */
+	PICK_IVRS,      /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */
+};
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef struct {
+	UINT32 CalloutName;
+	AGESA_STATUS (*CalloutPtr) (UINT32 Func, UINT32 Data, VOID* ConfigPtr);
+} BIOS_CALLOUT_STRUCT;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+UINT32 agesawrapper_amdinitreset (void);
+UINT32 agesawrapper_amdinitearly (void);
+UINT32 agesawrapper_amdinitenv (void);
+UINT32 agesawrapper_amdinitlate (void);
+UINT32 agesawrapper_amdinitpost (void);
+UINT32 agesawrapper_amdinitmid (void);
+UINT32 agesawrapper_amdreadeventlog (UINT8 HeapStatus);
+UINT32 agesawrapper_amdinitmmio (void);
+UINT32 agesawrapper_amdinitcpuio (void);
+void *agesawrapper_getlateinitptr (int pick);
+UINT32 agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, void *ConfigPtr);
+UINT32 agesawrapper_amdS3Save(VOID);
+UINT32 agesawrapper_amdinitresume(VOID);
+UINT32 agesawrapper_amds3laterestore (VOID);
+
+UINT32 agesawrapper_fchs3earlyrestore (VOID);
+UINT32 agesawrapper_fchs3laterestore (VOID);
+
+UINT32 GetHeapBase(AMD_CONFIG_PARAMS *StdHeader);
+
+#endif
diff --git a/src/mainboard/amd/olivehill/buildOpts.c b/src/mainboard/amd/olivehill/buildOpts.c
new file mode 100644
index 0000000..73117a2
--- /dev/null
+++ b/src/mainboard/amd/olivehill/buildOpts.c
@@ -0,0 +1,505 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/**
+ * @file
+ *
+ * AMD User options selection for a Brazos platform solution system
+ *
+ * This file is placed in the user's platform directory and contains the
+ * build option selections desired for that platform.
+ *
+ * For Information about this file, see @ref platforminstall.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 23714 $   @e \$Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $
+ */
+
+#include "AGESA.h"
+//#include "CommonReturns.h"
+#include "Filecode.h"
+#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
+
+#define INSTALL_FT3_SOCKET_SUPPORT           TRUE
+#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT   TRUE
+
+#define INSTALL_G34_SOCKET_SUPPORT  FALSE
+#define INSTALL_C32_SOCKET_SUPPORT  FALSE
+#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
+#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
+#define INSTALL_FS1_SOCKET_SUPPORT  FALSE
+#define INSTALL_FM1_SOCKET_SUPPORT  FALSE
+#define INSTALL_FP2_SOCKET_SUPPORT  FALSE
+#define INSTALL_FT1_SOCKET_SUPPORT  FALSE
+#define INSTALL_AM3_SOCKET_SUPPORT  FALSE
+#define INSTALL_FM2_SOCKET_SUPPORT  FALSE
+
+
+#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT
+  #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE
+    #undef INSTALL_FT3_SOCKET_SUPPORT
+    #define INSTALL_FT3_SOCKET_SUPPORT     FALSE
+  #endif
+#endif
+
+//#define BLDOPT_REMOVE_UDIMMS_SUPPORT           TRUE
+//#define BLDOPT_REMOVE_RDIMMS_SUPPORT           TRUE
+#define BLDOPT_REMOVE_LRDIMMS_SUPPORT          TRUE
+//#define BLDOPT_REMOVE_ECC_SUPPORT              TRUE
+//#define BLDOPT_REMOVE_BANK_INTERLEAVE          TRUE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE           TRUE
+#define BLDOPT_REMOVE_NODE_INTERLEAVE          TRUE
+#define BLDOPT_REMOVE_PARALLEL_TRAINING        TRUE
+#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT     TRUE
+//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT      TRUE
+#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT        TRUE
+//#define BLDOPT_REMOVE_ACPI_PSTATES             FALSE
+#define BLDOPT_REMOVE_SRAT                     FALSE //TRUE
+#define BLDOPT_REMOVE_SLIT                     FALSE //TRUE
+#define BLDOPT_REMOVE_WHEA                     FALSE //TRUE
+#define	BLDOPT_REMOVE_CRAT			TRUE
+//#define BLDOPT_REMOVE_DMI                      FALSE //TRUE
+//#define BLDOPT_REMOVE_EARLY_SAMPLES            FALSE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS              TRUE
+
+//This element selects whether P-States should be forced to be independent,
+// as reported by the ACPI _PSD object. For single-link processors,
+// setting TRUE for OS to support this feature.
+
+//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT  TRUE
+
+#define BLDCFG_PCI_MMIO_BASE	CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE	CONFIG_MMCONF_BUS_NUMBER
+/* Build configuration values here.
+ */
+#define BLDCFG_VRM_CURRENT_LIMIT                  15000
+#define BLDCFG_VRM_NB_CURRENT_LIMIT               13000
+#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT          21000
+#define BLDCFG_VRM_SVI_OCP_LEVEL                  BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT
+#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT       17000
+#define BLDCFG_VRM_NB_SVI_OCP_LEVEL               BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD            0
+#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD         0
+#define BLDCFG_VRM_SLEW_RATE                      10000
+#define BLDCFG_VRM_NB_SLEW_RATE                   BLDCFG_VRM_SLEW_RATE
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE              TRUE
+
+#define BLDCFG_PLAT_NUM_IO_APICS                 3
+#define BLDCFG_GNB_IOAPIC_ADDRESS		0xFEC20000
+#define BLDCFG_CORE_LEVELING_MODE                CORE_LEVEL_LOWEST
+#define BLDCFG_MEM_INIT_PSTATE                   0
+#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS    0x1770 // Specifies the IO addresses trapped by the
+                                                         // core for C-state entry requests. A value
+                                                         // of 0 in this field specifies that the core
+                                                         // does not trap any IO addresses for C-state entry.
+                                                         // Values greater than 0xFFF8 results in undefined behavior.
+#define BLDCFG_PLATFORM_CSTATE_OPDATA             0x1770
+
+#define BLDCFG_AMD_PLATFORM_TYPE                  AMD_PLATFORM_MOBILE
+
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT         DDR1866_FREQUENCY
+#define BLDCFG_MEMORY_MODE_UNGANGED               TRUE
+#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE           TRUE
+#define BLDCFG_MEMORY_QUADRANK_TYPE               QUADRANK_UNBUFFERED
+#define BLDCFG_MEMORY_RDIMM_CAPABLE               FALSE
+#define BLDCFG_MEMORY_UDIMM_CAPABLE               TRUE
+#define BLDCFG_MEMORY_SODIMM_CAPABLE              TRUE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING    TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING    FALSE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING        TRUE
+#define BLDCFG_MEMORY_POWER_DOWN                  TRUE
+#define BLDCFG_POWER_DOWN_MODE                    POWER_DOWN_BY_CHIP_SELECT
+#define BLDCFG_ONLINE_SPARE                       FALSE
+#define BLDCFG_BANK_SWIZZLE                       TRUE
+#define BLDCFG_TIMING_MODE_SELECT                 TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT                DDR1866_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL               TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM                FALSE
+#define BLDCFG_USE_BURST_MODE                     FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON               FALSE
+#define BLDCFG_ENABLE_ECC_FEATURE                 TRUE
+#define BLDCFG_ECC_REDIRECTION                    FALSE
+#define BLDCFG_SCRUB_DRAM_RATE                    0
+#define BLDCFG_SCRUB_L2_RATE                      0
+#define BLDCFG_SCRUB_L3_RATE                      0
+#define BLDCFG_SCRUB_IC_RATE                      0
+#define BLDCFG_SCRUB_DC_RATE                      0
+#define BLDCFG_ECC_SYNC_FLOOD                     TRUE
+#define BLDCFG_ECC_SYMBOL_SIZE                    4
+#define BLDCFG_HEAP_DRAM_ADDRESS                  0xB0000ul
+#define BLDCFG_1GB_ALIGN                          FALSE
+#define BLDCFG_UMA_ALIGNMENT                      UMA_4MB_ALIGNED
+#define BLDCFG_UMA_ALLOCATION_MODE                UMA_AUTO
+#define BLDCFG_PLATFORM_CSTATE_MODE               CStateModeDisabled
+#define BLDCFG_IOMMU_SUPPORT                      FALSE
+#define OPTION_GFX_INIT_SVIEW                     FALSE
+//#define BLDCFG_PLATFORM_POWER_POLICY_MODE         BatteryLife
+
+//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL         OEM_LCD_BACK_LIGHT_CONTROL
+#define BLDCFG_CFG_ABM_SUPPORT                    TRUE
+
+
+//#define BLDCFG_IGPU_SUBSYSTEM_ID            OEM_IGPU_SSID
+//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID   OEM_IGPU_HD_AUDIO_SSID
+//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID  OEM_APU_PCIE_PORTS_SSID
+
+#ifdef PCIEX_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_BASE PCIEX_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE (PCIEX_LENGTH >> 20)
+#endif
+
+#define BLDCFG_PROCESSOR_SCOPE_NAME0              'P'
+#define BLDCFG_PROCESSOR_SCOPE_NAME1              '0'
+#define BLDCFG_PCIE_TRAINING_ALGORITHM           PcieTrainingDistributed
+
+/*  Process the options...
+ * This file include MUST occur AFTER the user option selection settings
+ */
+#define AGESA_ENTRY_INIT_RESET                    TRUE
+#define AGESA_ENTRY_INIT_RECOVERY                 FALSE
+#define AGESA_ENTRY_INIT_EARLY                    TRUE
+#define AGESA_ENTRY_INIT_POST                     TRUE
+#define AGESA_ENTRY_INIT_ENV                      TRUE
+#define AGESA_ENTRY_INIT_MID                      TRUE
+#define AGESA_ENTRY_INIT_LATE                     TRUE
+#define AGESA_ENTRY_INIT_S3SAVE                   TRUE
+#define AGESA_ENTRY_INIT_RESUME                   TRUE //TRUE
+#define AGESA_ENTRY_INIT_LATE_RESTORE             TRUE
+#define AGESA_ENTRY_INIT_GENERAL_SERVICES         TRUE
+/*
+ * Customized OEM build configurations for FCH component
+ */
+// #define BLDCFG_SMBUS0_BASE_ADDRESS            0xB00
+// #define BLDCFG_SMBUS1_BASE_ADDRESS            0xB20
+// #define BLDCFG_SIO_PME_BASE_ADDRESS           0xE00
+// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS     0x400
+// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS     0x404
+// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS      0x408
+// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS     0x410
+// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS        0x420
+// #define BLDCFG_SPI_BASE_ADDRESS               0xFEC10000
+// #define BLDCFG_WATCHDOG_TIMER_BASE            0xFEC00000
+// #define BLDCFG_HPET_BASE_ADDRESS              0xFED00000
+// #define BLDCFG_SMI_CMD_PORT_ADDRESS           0xB0
+// #define BLDCFG_ACPI_PMA_BLK_ADDRESS           0xFE00
+// #define BLDCFG_ROM_BASE_ADDRESS               0xFED61000
+// #define BLDCFG_AZALIA_SSID                    0x780D1022
+// #define BLDCFG_SMBUS_SSID                     0x780B1022
+// #define BLDCFG_IDE_SSID                       0x780C1022
+// #define BLDCFG_SATA_AHCI_SSID                 0x78011022
+// #define BLDCFG_SATA_IDE_SSID                  0x78001022
+// #define BLDCFG_SATA_RAID5_SSID                0x78031022
+// #define BLDCFG_SATA_RAID_SSID                 0x78021022
+// #define BLDCFG_EHCI_SSID                      0x78081022
+// #define BLDCFG_OHCI_SSID                      0x78071022
+// #define BLDCFG_LPC_SSID                       0x780E1022
+// #define BLDCFG_SD_SSID                        0x78061022
+// #define BLDCFG_XHCI_SSID                      0x78121022
+// #define BLDCFG_FCH_PORT80_BEHIND_PCIB         FALSE
+// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP     TRUE
+// #define BLDCFG_FCH_GPP_LINK_CONFIG            PortA4
+// #define BLDCFG_FCH_GPP_PORT0_PRESENT          FALSE
+// #define BLDCFG_FCH_GPP_PORT1_PRESENT          FALSE
+// #define BLDCFG_FCH_GPP_PORT2_PRESENT          FALSE
+// #define BLDCFG_FCH_GPP_PORT3_PRESENT          FALSE
+// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG          FALSE
+// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG          FALSE
+// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG          FALSE
+// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG          FALSE
+
+CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] =
+{
+  { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E },
+  { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E },
+  { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 },
+  { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 },
+  { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 },
+  { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 },
+  { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 },
+  { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 },
+  { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 },
+  { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 },
+  { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 },
+  { CPU_LIST_TERMINAL }
+};
+
+#define BLDCFG_AP_MTRR_SETTINGS_LIST &KabiniApMtrrSettingsList
+
+//#include  "KeralaInstall.h"
+
+/*  Include the files that instantiate the configuration definitions.  */
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFeatures.h"
+#include "Table.h"
+#include "CommonReturns.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "GnbInterface.h"
+
+                  // This is the delivery package title, "BrazosPI"
+                  // This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING  {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}
+
+                  // This is the release version number of the AGESA component
+                  // This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING  {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '}
+
+/* MEMORY_BUS_SPEED */
+//#define DDR400_FREQUENCY   200     ///< DDR 400
+//#define DDR533_FREQUENCY   266     ///< DDR 533
+//#define DDR667_FREQUENCY   333     ///< DDR 667
+//#define DDR800_FREQUENCY   400     ///< DDR 800
+//#define DDR1066_FREQUENCY   533    ///< DDR 1066
+//#define DDR1333_FREQUENCY   667    ///< DDR 1333
+//#define DDR1600_FREQUENCY   800    ///< DDR 1600
+//#define DDR1866_FREQUENCY   933    ///< DDR 1866
+//#define DDR2100_FREQUENCY   1050   ///< DDR 2100
+//#define DDR2133_FREQUENCY   1066   ///< DDR 2133
+//#define DDR2400_FREQUENCY   1200   ///< DDR 2400
+//#define UNSUPPORTED_DDR_FREQUENCY		1201 ///< Highest limit of DDR frequency
+//
+///* QUANDRANK_TYPE*/
+//#define QUADRANK_REGISTERED				0 ///< Quadrank registered DIMM
+//#define QUADRANK_UNBUFFERED				1 ///< Quadrank unbuffered DIMM
+//
+///* USER_MEMORY_TIMING_MODE */
+//#define TIMING_MODE_AUTO				0 ///< Use best rate possible
+//#define TIMING_MODE_LIMITED				1 ///< Set user top limit
+//#define TIMING_MODE_SPECIFIC			2 ///< Set user specified speed
+//
+///* POWER_DOWN_MODE */
+//#define POWER_DOWN_BY_CHANNEL			0 ///< Channel power down mode
+//#define POWER_DOWN_BY_CHIP_SELECT		1 ///< Chip select power down mode
+
+/*
+ * Agesa optional capabilities selection.
+ * Uncomment and mark FALSE those features you wish to include in the build.
+ * Comment out or mark TRUE those features you want to REMOVE from the build.
+ */
+
+#define DFLT_SMBUS0_BASE_ADDRESS            0xB00
+#define DFLT_SMBUS1_BASE_ADDRESS            0xB20
+#define DFLT_SIO_PME_BASE_ADDRESS           0xE00
+#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS     0x800
+#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS     0x804
+#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS      0x808
+#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS     0x810
+#define DFLT_ACPI_GPE0_BLOCK_ADDRESS        0x820
+#define DFLT_SPI_BASE_ADDRESS               0xFEC10000
+#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS    0xFEC000F0
+#define DFLT_HPET_BASE_ADDRESS              0xFED00000
+#define DFLT_SMI_CMD_PORT                   0xB0
+#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS       0xFE00
+#define DFLT_GEC_BASE_ADDRESS               0xFED61000
+#define DFLT_AZALIA_SSID                    0x780D1022
+#define DFLT_SMBUS_SSID                     0x780B1022
+#define DFLT_IDE_SSID                       0x780C1022
+#define DFLT_SATA_AHCI_SSID                 0x78011022
+#define DFLT_SATA_IDE_SSID                  0x78001022
+#define DFLT_SATA_RAID5_SSID                0x78031022
+#define DFLT_SATA_RAID_SSID                 0x78021022
+#define DFLT_EHCI_SSID                      0x78081022
+#define DFLT_OHCI_SSID                      0x78071022
+#define DFLT_LPC_SSID                       0x780E1022
+#define DFLT_SD_SSID                        0x78061022
+#define DFLT_XHCI_SSID                      0x78121022
+#define DFLT_FCH_PORT80_BEHIND_PCIB         FALSE
+#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP     TRUE
+#define DFLT_FCH_GPP_LINK_CONFIG            PortA4
+#define DFLT_FCH_GPP_PORT0_PRESENT          FALSE
+#define DFLT_FCH_GPP_PORT1_PRESENT          FALSE
+#define DFLT_FCH_GPP_PORT2_PRESENT          FALSE
+#define DFLT_FCH_GPP_PORT3_PRESENT          FALSE
+#define DFLT_FCH_GPP_PORT0_HOTPLUG          FALSE
+#define DFLT_FCH_GPP_PORT1_HOTPLUG          FALSE
+#define DFLT_FCH_GPP_PORT2_HOTPLUG          FALSE
+#define DFLT_FCH_GPP_PORT3_HOTPLUG          FALSE
+//#define BLDCFG_IR_PIN_CONTROL	0x33
+
+GPIO_CONTROL   olivehill_gpio[] = {
+	{183, Function1, GpioIn | GpioOutEnB | PullUpB},
+	{-1}
+};
+//#define BLDCFG_FCH_GPIO_CONTROL_LIST           (&olivehill_gpio[0])
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file.  The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE            (0)
+#define DFLT_SCRUB_L2_RATE              (0)
+#define DFLT_SCRUB_L3_RATE              (0)
+#define DFLT_SCRUB_IC_RATE              (0)
+#define DFLT_SCRUB_DC_RATE              (0)
+#define DFLT_MEMORY_QUADRANK_TYPE       QUADRANK_UNBUFFERED
+#define DFLT_VRM_SLEW_RATE              (5000)
+
+#include "PlatformInstall.h"
+
+/*----------------------------------------------------------------------------------------
+ *                        CUSTOMER OVERIDES MEMORY TABLE
+ *----------------------------------------------------------------------------------------
+ */
+
+/*
+ *  Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ *  (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ *  is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ *  use its default conservative settings.
+ */
+CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
+  //
+  // The following macros are supported (use comma to separate macros):
+  //
+  // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
+  //      The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
+  //      AGESA will base on this value to disable unused MemClk to save power.
+  //      Example:
+  //      BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
+  //           Bit AM3/S1g3 pin name
+  //           0   M[B,A]_CLK_H/L[0]
+  //           1   M[B,A]_CLK_H/L[1]
+  //           2   M[B,A]_CLK_H/L[2]
+  //           3   M[B,A]_CLK_H/L[3]
+  //           4   M[B,A]_CLK_H/L[4]
+  //           5   M[B,A]_CLK_H/L[5]
+  //           6   M[B,A]_CLK_H/L[6]
+  //           7   M[B,A]_CLK_H/L[7]
+  //      And platform has the following routing:
+  //           CS0   M[B,A]_CLK_H/L[4]
+  //           CS1   M[B,A]_CLK_H/L[2]
+  //           CS2   M[B,A]_CLK_H/L[3]
+  //           CS3   M[B,A]_CLK_H/L[5]
+  //      Then platform can specify the following macro:
+  //      MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
+  //
+  // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
+  //      The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
+  //      AGESA will base on this value to tristate unused CKE to save power.
+  //
+  // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
+  //      The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
+  //      AGESA will base on this value to tristate unused ODT pins to save power.
+  //
+  // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
+  //      The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
+  //      AGESA will base on this value to tristate unused Chip select to save power.
+  //
+  // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
+  //      Specifies the number of DIMM slots per channel.
+  //
+  // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
+  //      Specifies the number of Chip selects per channel.
+  //
+  // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
+  //      Specifies the number of channels per socket.
+  //
+  // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
+  //      Specifies DDR bus speed of channel ChannelID on socket SocketID.
+  //
+  // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
+  //      Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
+  //
+  // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+  //      Byte6Seed, Byte7Seed, ByteEccSeed)
+  //      Specifies the write leveling seed for a channel of a socket.
+  //
+  // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+  //      Byte6Seed, Byte7Seed, ByteEccSeed)
+  //      Speicifes the HW RXEN training seed for a channel of a socket
+  //
+	#define SEED_A 0x12
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_A, ALL_DIMMS,
+		SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A,
+		SEED_A),
+
+  NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
+  NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1),
+  MOTHER_BOARD_LAYERS (LAYERS_4),
+
+  MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00),
+  CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */
+  ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08),
+  CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00),
+
+  PSO_END
+};
+
+/*
+ * These tables are optional and may be used to adjust memory timing settings
+ */
+#include "mm.h"
+#include "mn.h"
+
+// Customer table
+UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] =
+{
+ // Hardcoded Memory Training Values
+
+ // The following macro should be used to override training values for your platform
+ //
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
+ //
+ //   NOTE:
+ //   The following training hardcode values are example values that were taken from a tilapia motherboard
+ //   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
+ //   the table and replace the byte lane values with your own.
+ //
+ //                                                                               ------------------ BYTE LANES ----------------------
+ //                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
+ // Write Data Timing
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
+
+ // DQS Receiver Enable
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
+
+ // Write DQS Delays
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
+
+ // Read DQS Delays
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
+ //--------------------------------------------------------------------------------------------------------------------------------------------------
+ // TABLE END
+  NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
+};
+UINT8 SizeOfTableTN = sizeof (AGESA_MEM_TABLE_TN) / sizeof (AGESA_MEM_TABLE_TN[0]);
diff --git a/src/mainboard/amd/olivehill/cmos.layout b/src/mainboard/amd/olivehill/cmos.layout
new file mode 100644
index 0000000..f6b5806
--- /dev/null
+++ b/src/mainboard/amd/olivehill/cmos.layout
@@ -0,0 +1,114 @@
+#*****************************************************************************
+#
+#  This file is part of the coreboot project.
+#
+#  Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; version 2 of the License.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#*****************************************************************************
+
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
+399          1       e       2        multi_core
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432          8       h       0        boot_countdown
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+445          1       e       1        iommu
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        amd_reserved
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+8     0     400Mhz
+8     1     333Mhz
+8     2     266Mhz
+8     3     200Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
+
+checksums
+
+checksum 392 983 984
diff --git a/src/mainboard/amd/olivehill/devicetree.cb b/src/mainboard/amd/olivehill/devicetree.cb
new file mode 100644
index 0000000..3bcaaee
--- /dev/null
+++ b/src/mainboard/amd/olivehill/devicetree.cb
@@ -0,0 +1,76 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2013 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+chip northbridge/amd/agesa/family16kb/root_complex
+	device cpu_cluster 0 on
+		chip cpu/amd/agesa/family16kb
+			device lapic 0 on  end
+		end
+	end
+
+	device domain 0 on
+		subsystemid 0x1022 0x1410 inherit
+		chip northbridge/amd/agesa/family16kb # CPU side of HT root complex
+
+			chip northbridge/amd/agesa/family16kb # PCI side of HT root complex
+				device pci 0.0 on  end # Root Complex
+				device pci 1.0 on  end # Internal Graphics P2P bridge 0x9804
+				device pci 1.1 on  end # Internal Multimedia
+				device pci 2.0 on  end # PCIe Host Bridge
+				device pci 2.1 on  end # x4 PCIe slot
+				device pci 2.2 on  end # mPCIe slot
+				device pci 2.3 on  end # Realtek NIC
+				device pci 2.4 on  end # Edge Connector
+				device pci 2.5 on  end # Edge Connector
+			end	#chip northbridge/amd/agesa/family16kb
+
+			chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus
+				device pci 10.0 on  end # XHCI HC0
+				device pci 11.0 on  end # SATA
+				device pci 12.0 on  end # USB
+				device pci 12.2 on  end # USB
+				device pci 13.0 on  end # USB
+				device pci 13.2 on  end # USB
+				device pci 14.0 on      # SM
+					chip drivers/generic/generic #dimm 0-0-0
+						device i2c 50 on end
+					end
+					chip drivers/generic/generic #dimm 0-0-1
+						device i2c 51 on end
+					end
+				end # SM
+				device pci 14.2 on  end # HDA	0x4383
+				device pci 14.3 on  end # LPC	0x439d
+				device pci 14.7 on  end # SD
+			end	#chip southbridge/amd/hudson
+
+			device pci 18.0 on  end
+			device pci 18.1 on  end
+			device pci 18.2 on  end
+			device pci 18.3 on  end
+			device pci 18.4 on  end
+			device pci 18.5 on  end
+			register "spdAddrLookup" = "
+			{
+				{ {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
+				{ {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
+			}"
+
+		end	#chip northbridge/amd/agesa/family16kb # CPU side of HT root complex
+	end	#domain
+end	#northbridge/amd/agesa/family16kb/root_complex
diff --git a/src/mainboard/amd/olivehill/dsdt.asl b/src/mainboard/amd/olivehill/dsdt.asl
new file mode 100644
index 0000000..20a74af
--- /dev/null
+++ b/src/mainboard/amd/olivehill/dsdt.asl
@@ -0,0 +1,1416 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+	"DSDT.AML",           /* Output filename */
+	"DSDT",                 /* Signature */
+	0x02,		/* DSDT Revision, needs to be 2 for 64bit */
+	"AMD   ",               /* OEMID */
+	"COREBOOT",	     /* TABLE ID */
+	0x00010001	/* OEM Revision */
+	)
+{	/* Start of ASL file */
+	/* #include "../../../arch/x86/acpi/debug.asl" */		/* Include global debug methods if needed */
+
+	/* Data to be patched by the BIOS during POST */
+	/* FIXME the patching is not done yet! */
+	/* Memory related values */
+	Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
+	Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+	Name(PBLN, 0x0)	/* Length of BIOS area */
+
+	Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS)	/* Base address of PCIe config space */
+	Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+	Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+
+	Name(SSFG, 0x0D)		/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+	/* USB overcurrent mapping pins.   */
+	Name(UOM0, 0)
+	Name(UOM1, 2)
+	Name(UOM2, 0)
+	Name(UOM3, 7)
+	Name(UOM4, 2)
+	Name(UOM5, 2)
+	Name(UOM6, 6)
+	Name(UOM7, 2)
+	Name(UOM8, 6)
+	Name(UOM9, 6)
+
+	/* Some global data */
+	Name(OSTP, 3)		/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+	Name(OSV, Ones)	/* Assume nothing */
+	Name(PMOD, One)	/* Assume APIC */
+
+	/*
+	 * Processor Object
+	 *
+	 */
+	Scope (\_PR) {		/* define processor scope */
+		Processor(
+			P000,		/* name space name */
+			0,		/* Unique number for this processor */
+			0x810,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+		}
+
+		Processor(
+			P001,		/* name space name */
+			1,		/* Unique number for this processor */
+			0x0810,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+		}
+		Processor(
+			P002,		/* name space name */
+			2,		/* Unique number for this processor */
+			0x0810,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+		}
+		Processor(
+			P003,		/* name space name */
+			3,		/* Unique number for this processor */
+			0x0810,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+		}
+		Processor(
+			P004,		/* name space name */
+			4,		/* Unique number for this processor */
+			0x0810,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+		}
+		Processor(
+			P005,		/* name space name */
+			5,		/* Unique number for this processor */
+			0x0810,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+		}
+		Processor(
+			P006,		/* name space name */
+			6,		/* Unique number for this processor */
+			0x0810,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+		}
+		Processor(
+			P007,		/* name space name */
+			7,		/* Unique number for this processor */
+			0x0810,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+		}
+	} /* End _PR scope */
+
+	/* PIC IRQ mapping registers, C00h-C01h. */
+	OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
+		Field(PRQM, ByteAcc, NoLock, Preserve) {
+		PRQI, 0x00000008,
+		PRQD, 0x00000008,  /* Offset: 1h */
+	}
+	IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
+		PIRA, 0x00000008,	/* Index 0 */
+		PIRB, 0x00000008,	/* Index 1 */
+		PIRC, 0x00000008,	/* Index 2 */
+		PIRD, 0x00000008,	/* Index 3 */
+		PIRE, 0x00000008,	/* Index 4 */
+		PIRF, 0x00000008,	/* Index 5 */
+		PIRG, 0x00000008,	/* Index 6 */
+		PIRH, 0x00000008,	/* Index 7 */
+	}
+
+	/* PCI Error control register */
+	OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
+		Field(PERC, ByteAcc, NoLock, Preserve) {
+		SENS, 0x00000001,
+		PENS, 0x00000001,
+		SENE, 0x00000001,
+		PENE, 0x00000001,
+	}
+
+	/* Client Management index/data registers */
+	OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
+		Field(CMT, ByteAcc, NoLock, Preserve) {
+		CMTI,      8,
+		/* Client Management Data register */
+		G64E,   1,
+		G64O,      1,
+		G32O,      2,
+		,       2,
+		GPSL,     2,
+	}
+
+	/* GPM Port register */
+	OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
+		Field(GPT, ByteAcc, NoLock, Preserve) {
+		GPB0,1,
+		GPB1,1,
+		GPB2,1,
+		GPB3,1,
+		GPB4,1,
+		GPB5,1,
+		GPB6,1,
+		GPB7,1,
+	}
+
+	/* Flash ROM program enable register */
+	OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
+		Field(FRE, ByteAcc, NoLock, Preserve) {
+		,     0x00000006,
+		FLRE, 0x00000001,
+	}
+
+	/* PM2 index/data registers */
+	OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
+		Field(PM2R, ByteAcc, NoLock, Preserve) {
+		PM2I, 0x00000008,
+		PM2D, 0x00000008,
+	}
+
+	/* Power Management I/O registers, TODO:PMIO is quite different in SB800. */
+	OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
+		Field(PIOR, ByteAcc, NoLock, Preserve) {
+		PIOI, 0x00000008,
+		PIOD, 0x00000008,
+	}
+	IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
+		Offset(0xEE),
+		UPWS, 3,
+	}
+
+	/* PM1 Event Block
+	* First word is PM1_Status, Second word is PM1_Enable
+	*/
+	Scope(\_SB) {
+		/* PCIe Configuration Space for CONFIG_MMCONF_BUS_NUMBER busses */
+		OperationRegion(PCFG, SystemMemory, PCBA, PCLN)
+			Field(PCFG, ByteAcc, NoLock, Preserve) {
+			/* Byte offsets are computed using the following technique:
+			 * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
+			 * The 8 comes from 8 functions per device, and 4096 bytes per function config space
+			*/
+			Offset(0x00088024),	/* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
+			STB5, 32,
+			Offset(0x00098042),	/* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
+			PT0D, 1,
+			PT1D, 1,
+			PT2D, 1,
+			PT3D, 1,
+			PT4D, 1,
+			PT5D, 1,
+			PT6D, 1,
+			PT7D, 1,
+			PT8D, 1,
+			PT9D, 1,
+			Offset(0x000A0004),	/* Byte offset to SMBUS	register 4h - Bus 0, Device 20, Function 0 */
+			SBIE, 1,
+			SBME, 1,
+			Offset(0x000A0008),	/* Byte offset to SMBUS	register 8h - Bus 0, Device 20, Function 0 */
+			SBRI, 8,
+			Offset(0x000A0014),	/* Byte offset to SMBUS	register 14h - Bus 0, Device 20, Function 0 */
+			SBB1, 32,
+			Offset(0x000A0078),	/* Byte offset to SMBUS	register 78h - Bus 0, Device 20, Function 0 */
+			,14,
+			P92E, 1,		/* Port92 decode enable */
+		}
+
+		OperationRegion(SB5, SystemMemory, STB5, 0x1000)
+			Field(SB5, AnyAcc, NoLock, Preserve){
+			/* Port 0 */
+			Offset(0x120),		/* Port 0 Task file status */
+			P0ER, 1,
+			, 2,
+			P0DQ, 1,
+			, 3,
+			P0BY, 1,
+			Offset(0x128),		/* Port 0 Serial ATA status */
+			P0DD, 4,
+			, 4,
+			P0IS, 4,
+			Offset(0x12C),		/* Port 0 Serial ATA control */
+			P0DI, 4,
+			Offset(0x130),		/* Port 0 Serial ATA error */
+			, 16,
+			P0PR, 1,
+
+			/* Port 1 */
+			offset(0x1A0),		/* Port 1 Task file status */
+			P1ER, 1,
+			, 2,
+			P1DQ, 1,
+			, 3,
+			P1BY, 1,
+			Offset(0x1A8),		/* Port 1 Serial ATA status */
+			P1DD, 4,
+			, 4,
+			P1IS, 4,
+			Offset(0x1AC),		/* Port 1 Serial ATA control */
+			P1DI, 4,
+			Offset(0x1B0),		/* Port 1 Serial ATA error */
+			, 16,
+			P1PR, 1,
+
+			/* Port 2 */
+			Offset(0x220),		/* Port 2 Task file status */
+			P2ER, 1,
+			, 2,
+			P2DQ, 1,
+			, 3,
+			P2BY, 1,
+			Offset(0x228),		/* Port 2 Serial ATA status */
+			P2DD, 4,
+			, 4,
+			P2IS, 4,
+			Offset(0x22C),		/* Port 2 Serial ATA control */
+			P2DI, 4,
+			Offset(0x230),		/* Port 2 Serial ATA error */
+			, 16,
+			P2PR, 1,
+
+			/* Port 3 */
+			Offset(0x2A0),		/* Port 3 Task file status */
+			P3ER, 1,
+			, 2,
+			P3DQ, 1,
+			, 3,
+			P3BY, 1,
+			Offset(0x2A8),		/* Port 3 Serial ATA status */
+			P3DD, 4,
+			, 4,
+			P3IS, 4,
+			Offset(0x2AC),		/* Port 3 Serial ATA control */
+			P3DI, 4,
+			Offset(0x2B0),		/* Port 3 Serial ATA error */
+			, 16,
+			P3PR, 1,
+		}
+	}
+
+	#include "acpi/routing.asl"
+
+	Scope(\_SB) {
+
+		Method(CkOT, 0){
+
+			if(LNotEqual(OSTP, Ones)) {Return(OSTP)}	/* OS version was already detected */
+
+			if(CondRefOf(\_OSI,Local1))
+			{
+				Store(1, OSTP)                /* Assume some form of XP */
+				if (\_OSI("Windows 2006"))      /* Vista */
+				{
+					Store(2, OSTP)
+				}
+			} else {
+				If(WCMP(\_OS,"Linux")) {
+					Store(3, OSTP)            /* Linux */
+				} Else {
+					Store(4, OSTP)            /* Gotta be WinCE */
+				}
+			}
+			Return(OSTP)
+		}
+
+		Method(_PIC, 0x01, NotSerialized)
+		{
+			If (Arg0)
+			{
+				\_SB.CIRQ()
+			}
+			Store(Arg0, PMOD)
+		}
+		Method(CIRQ, 0x00, NotSerialized){
+			//Store(0, PIRA)
+			//Store(0, PIRB)
+			//Store(0, PIRC)
+			//Store(0, PIRD)
+			//Store(0, PIRE)
+			//Store(0, PIRF)
+			//Store(0, PIRG)
+			//Store(0, PIRH)
+		}
+
+		Name(IRQB, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Shared){15}
+		})
+
+		Name(IRQP, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
+		})
+
+		Name(PITF, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){9}
+		})
+
+		Device(INTA) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 1)
+
+			Method(_STA, 0) {
+				if (PIRA) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTA._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_DIS\n") */
+				//Store(0x1F, PIRA)
+			} /* End Method(_SB.INTA._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTA._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRA, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTA._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				//Store(Local0, PIRA)
+			} /* End Method(_SB.INTA._SRS) */
+		} /* End Device(INTA) */
+
+		Device(INTB) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 2)
+
+			Method(_STA, 0) {
+				if (PIRB) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTB._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_DIS\n") */
+				//Store(0, PIRB)
+			} /* End Method(_SB.INTB._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTB._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRB, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTB._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRB)
+			} /* End Method(_SB.INTB._SRS) */
+		} /* End Device(INTB)  */
+
+		Device(INTC) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 3)
+
+			Method(_STA, 0) {
+				if (PIRC) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTC._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_DIS\n") */
+				//Store(0, PIRC)
+			} /* End Method(_SB.INTC._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTC._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRC, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTC._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRC)
+			} /* End Method(_SB.INTC._SRS) */
+		} /* End Device(INTC)  */
+
+		Device(INTD) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 4)
+
+			Method(_STA, 0) {
+				if (PIRD) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTD._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_DIS\n") */
+				//Store(0, PIRD)
+			} /* End Method(_SB.INTD._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTD._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRD, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTD._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRD)
+			} /* End Method(_SB.INTD._SRS) */
+		} /* End Device(INTD)  */
+
+		Device(INTE) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 5)
+
+			Method(_STA, 0) {
+				if (PIRE) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTE._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_DIS\n") */
+				//Store(0, PIRE)
+			} /* End Method(_SB.INTE._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTE._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRE, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTE._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRE)
+			} /* End Method(_SB.INTE._SRS) */
+		} /* End Device(INTE)  */
+
+		Device(INTF) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 6)
+
+			Method(_STA, 0) {
+				if (PIRF) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTF._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_DIS\n") */
+				//Store(0, PIRF)
+			} /* End Method(_SB.INTF._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_PRS\n") */
+				Return(PITF)
+			} /* Method(_SB.INTF._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRF, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTF._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRF)
+			} /*  End Method(_SB.INTF._SRS) */
+		} /* End Device(INTF)  */
+
+		Device(INTG) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 7)
+
+			Method(_STA, 0) {
+				if (PIRG) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTG._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_DIS\n") */
+				//Store(0, PIRG)
+			} /* End Method(_SB.INTG._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRG, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRG)
+			} /* End Method(_SB.INTG._SRS)  */
+		} /* End Device(INTG)  */
+
+		Device(INTH) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 8)
+
+			Method(_STA, 0) {
+				if (PIRH) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTH._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_DIS\n") */
+				//Store(0, PIRH)
+			} /* End Method(_SB.INTH._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRH, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				//Store(Local0, PIRH)
+			} /* End Method(_SB.INTH._SRS)  */
+		} /* End Device(INTH)   */
+
+	}   /* End Scope(_SB)  */
+
+	/* Supported sleep states: */
+	Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} )	/* (S0) - working state */
+
+	If (LAnd(SSFG, 0x01)) {
+		Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} )	/* (S1) - sleeping w/CPU context */
+	}
+	If (LAnd(SSFG, 0x02)) {
+		Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} )	/* (S2) - "light" Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x04)) {
+		Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} )	/* (S3) - Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x08)) {
+		Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} )	/* (S4) - Suspend to Disk */
+	}
+
+	Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} )	/* (S5) - Soft Off */
+
+	Name(\_SB.CSPS ,0)				/* Current Sleep State (S0, S1, S2, S3, S4, S5) */
+	Name(CSMS, 0)			/* Current System State */
+
+	/* Wake status package */
+	Name(WKST,Package(){Zero, Zero})
+
+	/*
+	* \_PTS - Prepare to Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2, etc
+	*
+	* Exit:
+	*		-none-
+	*
+	* The _PTS control method is executed at the beginning of the sleep process
+	* for S1-S5. The sleeping value is passed to the _PTS control method.	This
+	* control method may be executed a relatively long time before entering the
+	* sleep state and the OS may abort	the operation without notification to
+	* the ACPI driver.  This method cannot modify the configuration or power
+	* state of any device in the system.
+	*/
+	Method(_PTS, 1) {
+		/* DBGO("\\_PTS\n") */
+		/* DBGO("From S0 to S") */
+		/* DBGO(Arg0) */
+		/* DBGO("\n") */
+
+		/* Don't allow PCIRST# to reset USB */
+		//if (LEqual(Arg0,3)){
+		//	Store(0,URRE)
+		//}
+
+		/* Clear sleep SMI status flag and enable sleep SMI trap. */
+		/*Store(One, CSSM)
+		Store(One, SSEN)*/
+
+		/* On older chips, clear PciExpWakeDisEn */
+		/*if (LLessEqual(\_SB.SBRI, 0x13)) {
+		*    	Store(0,\_SB.PWDE)
+		*}
+		*/
+
+		/* Clear wake status structure. */
+		Store(0, Index(WKST,0))
+		Store(0, Index(WKST,1))
+		Store(7, UPWS)
+	} /* End Method(\_PTS) */
+
+	/*
+	*  The following method results in a "not a valid reserved NameSeg"
+	*  warning so I have commented it out for the duration.  It isn't
+	*  used, so it could be removed.
+	*
+	*
+	*  	\_GTS OEM Going To Sleep method
+	*
+	*  	Entry:
+	*  		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*  	Exit:
+	*  		-none-
+	*
+	*  Method(\_GTS, 1) {
+	*  DBGO("\\_GTS\n")
+	*  DBGO("From S0 to S")
+	*  DBGO(Arg0)
+	*  DBGO("\n")
+	*  }
+	*/
+
+	/*
+	*	\_BFS OEM Back From Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		-none-
+	*/
+	Method(\_BFS, 1) {
+		/* DBGO("\\_BFS\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+	}
+
+	/*
+	*  \_WAK System Wake method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		Return package of 2 DWords
+	*		Dword 1 - Status
+	*			0x00000000	wake succeeded
+	*			0x00000001	Wake was signaled but failed due to lack of power
+	*			0x00000002	Wake was signaled but failed due to thermal condition
+	*		Dword 2 - Power Supply state
+	*			if non-zero the effective S-state the power supply entered
+	*/
+	Method(\_WAK, 1) {
+		/* DBGO("\\_WAK\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+
+		/* Re-enable HPET */
+		//Store(1,HPDE)
+
+		/* Restore PCIRST# so it resets USB */
+		//if (LEqual(Arg0,3)){
+		//	Store(1,URRE)
+		//}
+
+		/* Arbitrarily clear PciExpWakeStatus */
+		//Store(PWST, PWST)
+
+		/* if(DeRefOf(Index(WKST,0))) {
+		*	Store(0, Index(WKST,1))
+		* } else {
+		*	Store(Arg0, Index(WKST,1))
+		* }
+		*/
+		Return(WKST)
+	} /* End Method(\_WAK) */
+
+	Scope(\_GPE) {	/* Start Scope GPE */
+		/*  General event 0  */
+		/* Method(_L00) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 1  */
+		/* Method(_L01) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 2  */
+		/* Method(_L02) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 3  */
+		Method(_L03) {
+			/* DBGO("\\_GPE\\_L00\n") */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  General event 4  */
+		/* Method(_L04) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 5  */
+		/* Method(_L05) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 6 - Used for GPM6, moved to USB.asl */
+		/* Method(_L06) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 7 - Used for GPM7, moved to USB.asl */
+		/* Method(_L07) {
+		*	DBGO("\\_GPE\\_L07\n")
+		* }
+		*/
+
+		/*  Legacy PM event  */
+		Method(_L08) {
+			/* DBGO("\\_GPE\\_L08\n") */
+		}
+
+		/*  Temp warning (TWarn) event  */
+		Method(_L09) {
+			/* DBGO("\\_GPE\\_L09\n") */
+			/* Notify (\_TZ.TZ00, 0x80) */
+		}
+
+		/*  Reserved  */
+		/* Method(_L0A) {
+		*	DBGO("\\_GPE\\_L0A\n")
+		* }
+		*/
+
+		/*  USB controller PME#  */
+		Method(_L0B) {
+			/* DBGO("\\_GPE\\_L0B\n") */
+			Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  AC97 controller PME#  */
+		/* Method(_L0C) {
+		*	DBGO("\\_GPE\\_L0C\n")
+		* }
+		*/
+
+		/*  OtherTherm PME#  */
+		/* Method(_L0D) {
+		*	DBGO("\\_GPE\\_L0D\n")
+		* }
+		*/
+
+		/*  GPM9 SCI event - Moved to USB.asl */
+		/* Method(_L0E) {
+		*	DBGO("\\_GPE\\_L0E\n")
+		* }
+		*/
+
+		/*  PCIe HotPlug event  */
+		/* Method(_L0F) {
+		* 	DBGO("\\_GPE\\_L0F\n")
+		* }
+		*/
+
+		/*  ExtEvent0 SCI event  */
+		Method(_L10) {
+			/* DBGO("\\_GPE\\_L10\n") */
+		}
+
+		/*  ExtEvent1 SCI event  */
+		Method(_L11) {
+			/* DBGO("\\_GPE\\_L11\n") */
+		}
+
+		/*  PCIe PME# event  */
+		/* Method(_L12) {
+		*	DBGO("\\_GPE\\_L12\n")
+		* }
+		*/
+
+		/*  GPM0 SCI event - Moved to USB.asl */
+		/* Method(_L13) {
+		* 	DBGO("\\_GPE\\_L13\n")
+		* }
+		*/
+
+		/*  GPM1 SCI event - Moved to USB.asl */
+		/* Method(_L14) {
+		* 	DBGO("\\_GPE\\_L14\n")
+		* }
+		*/
+
+		/*  GPM2 SCI event - Moved to USB.asl */
+		/* Method(_L15) {
+		* 	DBGO("\\_GPE\\_L15\n")
+		* }
+		*/
+
+		/*  GPM3 SCI event - Moved to USB.asl */
+		/* Method(_L16) {
+		*	DBGO("\\_GPE\\_L16\n")
+		* }
+		*/
+
+		/*  GPM8 SCI event - Moved to USB.asl */
+		/* Method(_L17) {
+		* 	DBGO("\\_GPE\\_L17\n")
+		* }
+		*/
+
+		/*  GPIO0 or GEvent8 event  */
+		Method(_L18) {
+			/* DBGO("\\_GPE\\_L18\n") */
+			Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  GPM4 SCI event - Moved to USB.asl */
+		/* Method(_L19) {
+		* 	DBGO("\\_GPE\\_L19\n")
+		* }
+		*/
+
+		/*  GPM5 SCI event - Moved to USB.asl */
+		/* Method(_L1A) {
+		*	DBGO("\\_GPE\\_L1A\n")
+		* }
+		*/
+
+		/*  Azalia SCI event  */
+		Method(_L1B) {
+			/* DBGO("\\_GPE\\_L1B\n") */
+			Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  GPM6 SCI event - Reassigned to _L06 */
+		/* Method(_L1C) {
+		*	DBGO("\\_GPE\\_L1C\n")
+		* }
+		*/
+
+		/*  GPM7 SCI event - Reassigned to _L07 */
+		/* Method(_L1D) {
+		*	DBGO("\\_GPE\\_L1D\n")
+		* }
+		*/
+
+		/*  GPIO2 or GPIO66 SCI event  */
+		/* Method(_L1E) {
+		* 	DBGO("\\_GPE\\_L1E\n")
+		* }
+		*/
+
+		/*  SATA SCI event - Moved to sata.asl */
+		/* Method(_L1F) {
+		*	 DBGO("\\_GPE\\_L1F\n")
+		* }
+		*/
+
+	} 	/* End Scope GPE */
+
+	//#include "acpi/usb.asl"
+
+	/* System Bus */
+	Scope(\_SB) { /* Start \_SB scope */
+		#include "../../../arch/x86/acpi/globutil.asl" /* global utility methods expected within the \_SB scope */
+
+		/*  _SB.PCI0 */
+		/* Note: Only need HID on Primary Bus */
+		Device(PCI0) {
+			External (TOM1)
+			External (TOM2)
+			Name(_HID, EISAID("PNP0A03"))
+			Name(_ADR, 0x00180000)	/* Dev# = BSP Dev#, Func# = 0 */
+			Method(_BBN, 0) { /* Bus number = 0 */
+				Return(0)
+			}
+			Method(_STA, 0) {
+				/* DBGO("\\_SB\\PCI0\\_STA\n") */
+				Return(0x0B)			/* Status is visible */
+			}
+
+			Method(_PRT,0) {
+				If(PMOD){ Return(APR0) }		/* APIC mode */
+				Return (PR0)				/* PIC Mode */
+			} /* end _PRT */
+
+			/* Describe the Northbridge devices Dev0 ,Func0*/
+			Device(AMRT) {
+				Name(_ADR, 0x00000000)
+			} /* end AMRT */
+
+			/* Gpp 0 */
+			Device(PBR4) {
+				Name(_ADR, 0x00020001)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS4) }	/* APIC mode */
+					Return (PS4)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR4 */
+
+			/* Gpp 1 */
+			Device(PBR5) {
+				Name(_ADR, 0x00020002)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS5) }	/* APIC mode */
+					Return (PS5)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR5 */
+
+			/* Gpp 2 */
+			Device(PBR6) {
+				Name(_ADR, 0x00020003)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS6) }	/* APIC mode */
+					Return (PS6)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR6 */
+
+			/* Gpp 3 */
+			Device(PBR7) {
+				Name(_ADR, 0x00020004)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS7) }	/* APIC mode */
+					Return (PS7)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR7 */
+
+			/* Gpp 4 */
+			Device(PBR8) {
+				Name(_ADR, 0x00020004)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS8) }	/* APIC mode */
+					Return (PS8)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR8 */
+
+
+			/* Describe the Southbridge devices */
+			Device(STCR) {	/* 0:11.0 - SATA */
+				Name(_ADR, 0x00110000)
+				//#include "acpi/sata.asl"
+			} /* end STCR */
+
+			Device(UOH1) {	/* 0:12.0 - OHCI */
+				Name(_ADR, 0x00120000)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH1 */
+
+			Device(UOH2) {	/* 0:12.2 - EHCI */
+				Name(_ADR, 0x00120002)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH2 */
+
+			Device(UOH3) {	/* 0:13.0 - OHCI */
+				Name(_ADR, 0x00130000)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH3 */
+
+			Device(UOH4) {	/* 0:13.2 - EHCI */
+				Name(_ADR, 0x00130002)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH4 */
+
+			Device(UOH5) {	/* 0:16.0 - OHCI */
+				Name(_ADR, 0x00160000)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH5 */
+
+			Device(UOH6) {	/* 0:16.2 - EHCI */
+				Name(_ADR, 0x00160002)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH5 */
+
+			Device(XHC0) {	/* 0:10.0 - XHCI */
+				Name(_ADR, 0x00100000)
+				Name(_PRW, Package() {0x0B, 4})
+			} /* end XHC0 */
+
+			Device(SBUS) {	/* 0:14.0 - SMBUS */
+				Name(_ADR, 0x00140000)
+			} /* end SBUS */
+
+			Device(AZHD) {	/* 0:14.2 - HD Audio */
+				Name(_ADR, 0x00140002)
+				OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
+					Field(AZPD, AnyAcc, NoLock, Preserve) {
+					offset (0x42),
+					NSDI, 1,
+					NSDO, 1,
+					NSEN, 1,
+					offset (0x44),
+					IPCR, 4,
+					offset (0x54),
+					PWST, 2,
+					, 6,
+					PMEB, 1,
+					, 6,
+					PMST, 1,
+					offset (0x62),
+					MMCR, 1,
+					offset (0x64),
+					MMLA, 32,
+					offset (0x68),
+					MMHA, 32,
+					offset (0x6C),
+					MMDT, 16,
+				}
+
+				Method(_INI) {
+					If(LEqual(OSTP,3)){   /* If we are running Linux */
+						Store(zero, NSEN)
+						Store(one, NSDO)
+						Store(one, NSDI)
+					}
+				}
+			} /* end AZHD */
+
+			Device(LIBR) {	/* 0:14.3 - LPC */
+				Name(_ADR, 0x00140003)
+				/* Method(_INI) {
+				*	DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
+				} */ /* End Method(_SB.SBRDG._INI) */
+
+				OperationRegion(CFG,PCI_Config,0x0,0x100) // Map PCI Configuration Space
+				Field(CFG,DWordAcc,NoLock,Preserve){
+				Offset(0xA0),
+				BAR,32}		// SPI Controller Base Address Register (Index 0xA0)
+
+				Device(LDRC)	// LPC device: Resource consumption
+				{
+						Name (_HID, EISAID("PNP0C02"))  // ID for Motherboard resources
+						Name (CRS, ResourceTemplate ()  // Current Motherboard resources
+						{
+							Memory32Fixed(ReadWrite,    // Setup for fixed resource location for SPI base address
+							0x00000000,					// Address Base
+							0x00000000,					// Address Length
+							BAR0						// Descriptor Name
+							)
+						})
+
+						Method(_CRS,0,NotSerialized)
+						{
+							CreateDwordField(^CRS,^BAR0._BAS,SPIB)  // Field to hold SPI base address
+							CreateDwordField(^CRS,^BAR0._LEN,SPIL)  // Field to hold SPI address length
+							Store(BAR,SPIB)		// SPI base address mapped
+							Store(0x1000,SPIL)	// 4k space mapped
+							Return(CRS)
+						}
+				}
+
+				/* Real Time Clock Device */
+				Device(RTC0) {
+					Name(_HID, EISAID("PNP0B00"))   /* AT Real Time Clock (not PIIX4 compatible) */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){8}
+						IO(Decode16,0x0070, 0x0070, 0, 2)
+						/* IO(Decode16,0x0070, 0x0070, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
+
+				Device(TMR) {	/* Timer */
+					Name(_HID,EISAID("PNP0100"))	/* System Timer */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){0}
+						IO(Decode16, 0x0040, 0x0040, 0, 4)
+						/* IO(Decode16, 0x0048, 0x0048, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
+
+				Device(SPKR) {	/* Speaker */
+					Name(_HID,EISAID("PNP0800"))	/* AT style speaker */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x0061, 0x0061, 0, 1)
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
+
+				Device(PIC) {
+					Name(_HID,EISAID("PNP0000"))	/* AT Interrupt Controller */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){2}
+						IO(Decode16,0x0020, 0x0020, 0, 2)
+						IO(Decode16,0x00A0, 0x00A0, 0, 2)
+						/* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
+						/* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
+
+				Device(MAD) { /* 8257 DMA */
+					Name(_HID,EISAID("PNP0200"))	/* Hardware Device ID */
+					Name(_CRS, ResourceTemplate() {
+						DMA(Compatibility,BusMaster,Transfer8){4}
+						IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
+						IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
+						IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
+						IO(Decode16, 0x0089, 0x0089, 0x01, 0x03)
+						IO(Decode16, 0x008F, 0x008F, 0x01, 0x01)
+						IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
+					}) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
+				} /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
+
+				Device(COPR) {
+					Name(_HID,EISAID("PNP0C04"))	/* Math Coprocessor */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
+						IRQNoFlags(){13}
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+			} /* end LIBR */
+
+			Device(SDCN) {	/* 0:14.7 - SD Controller */
+				Name(_ADR, 0x00140007)
+			} /* end SDCN */
+
+			Name(CRES, ResourceTemplate() {
+				IO(Decode16, 0x0CF8, 0x0CF8, 1,	8)
+
+				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,			/* address granularity */
+					0x0000,			/* range minimum */
+					0x0CF7,			/* range maximum */
+					0x0000,			/* translation */
+					0x0CF8			/* length */
+				)
+				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,			/* address granularity */
+					0x03B0,			/* range minimum */
+					0x03DF,			/* range maximum */
+					0x0000,			/* translation */
+					0x0030			/* length */
+				)
+
+				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,			/* address granularity */
+					0x0D00,			/* range minimum */
+					0xFFFF,			/* range maximum */
+					0x0000,			/* translation */
+					0xF300			/* length */
+				)
+
+				Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) 	/* VGA memory space */
+				Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1)	/* Assume C0000-E0000 empty */
+				/* memory space for PCI BARs below 4GB */
+				Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO)
+			}) /* End Name(_SB.PCI0.CRES) */
+
+			Method(_CRS, 0) {
+				/* DBGO("\\_SB\\PCI0\\_CRS\n") */
+				CreateDWordField(CRES, ^MMIO._BAS, MM1B)
+				CreateDWordField(CRES, ^MMIO._LEN, MM1L)
+				/*
+				 * Declare memory between TOM1 and 4GB as available
+				 * for PCI MMIO.
+				 * Use ShiftLeft to avoid 64bit constant (for XP).
+				 * This will work even if the OS does 32bit arithmetic, as
+				 * 32bit (0x00000000 - TOM1) will wrap and give the same
+				 * result as 64bit (0x100000000 - TOM1).
+				 */
+				Store(TOM1, MM1B)
+				ShiftLeft(0x10000000, 4, Local0)
+				Subtract(Local0, TOM1, Local0)
+				Store(Local0, MM1L)
+
+				Return(CRES) /* note to change the Name buffer */
+			} /* end of Method(_SB.PCI0._CRS) */
+
+			/*
+			*
+			*               FIRST METHOD CALLED UPON BOOT
+			*
+			*  1. If debugging, print current OS and ACPI interpreter.
+			*  2. Get PCI Interrupt routing from ACPI VSM, this
+			*     value is based on user choice in BIOS setup.
+			*/
+			Method(_INI, 0) {
+				/* DBGO("\\_SB\\_INI\n") */
+				/* DBGO("   DSDT.ASL code from ") */
+				/* DBGO(__DATE__) */
+				/* DBGO(" ") */
+				/* DBGO(__TIME__) */
+				/* DBGO("\n   Sleep states supported: ") */
+				/* DBGO("\n") */
+				/* DBGO("   \\_OS=") */
+				/* DBGO(\_OS) */
+				/* DBGO("\n   \\_REV=") */
+				/* DBGO(\_REV) */
+				/* DBGO("\n") */
+
+				/* Determine the OS we're running on */
+				CkOT()
+
+				/* On older chips, clear PciExpWakeDisEn */
+				/*if (LLessEqual(\SBRI, 0x13)) {
+				*    	Store(0,\PWDE)
+				* }
+				*/
+				/* TODO: It is unstable. */
+				//#include "acpi/AmdImc.asl" /* Hudson IMC function */
+				//ITZE() /* enable IMC Fan Control*/
+			} /* End Method(_SB._INI) */
+		} /* End Device(PCI0)  */
+
+		Device(PWRB) {	/* Start Power button device */
+			Name(_HID, EISAID("PNP0C0C"))
+			Name(_UID, 0xAA)
+			Name(_PRW, Package () {3, 0x04})	/* wake from S1-S4 */
+			Name(_STA, 0x0B) /* sata is invisible */
+		}
+	} /* End \_SB scope */
+
+	Scope(\_SI) {
+		Method(_SST, 1) {
+			/* DBGO("\\_SI\\_SST\n") */
+			/* DBGO("   New Indicator state: ") */
+			/* DBGO(Arg0) */
+			/* DBGO("\n") */
+		}
+	} /* End Scope SI */
+}
+/* End of ASL file */
diff --git a/src/mainboard/amd/olivehill/get_bus_conf.c b/src/mainboard/amd/olivehill/get_bus_conf.c
new file mode 100644
index 0000000..fca2625
--- /dev/null
+++ b/src/mainboard/amd/olivehill/get_bus_conf.c
@@ -0,0 +1,143 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <cpu/amd/amdfam14.h>
+#include "agesawrapper.h"
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+ * and acpi_tables busnum is default.
+ */
+u8 bus_isa;
+u8 bus_sb800[3];
+u32 apicid_sb800;
+
+/*
+ * Here you only need to set value in pci1234 for HT-IO that could be installed or not
+ * You may need to preset pci1234 for HTIO board,
+ * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+ */
+u32 pci1234x[] = {
+	0x0000ff0,
+};
+
+u32 bus_type[256];
+u32 sbdn_sb800;
+
+static u32 get_bus_conf_done = 0;
+
+#if CONFIG_HAVE_ACPI_RESUME
+extern u8 acpi_slp_type;
+#endif
+void get_bus_conf(void)
+{
+	u32 apicid_base;
+	u32 status;
+
+	device_t dev;
+	int i, j;
+
+	if (get_bus_conf_done == 1)
+		return;   /* do it only once */
+
+	get_bus_conf_done = 1;
+
+	/*
+	 * This is the call to AmdInitLate.  It is really in the wrong place, conceptually,
+	 * but functionally within the coreboot model, this is the best place to make the
+	 * call.  The logically correct place to call AmdInitLate is after PCI scan is done,
+	 * after the decision about S3 resume is made, and before the system tables are
+	 * written into RAM.  The routine that is responsible for writing the tables is
+	 * "write_tables", called near the end of "hardwaremain".  There is no platform
+	 * specific entry point between the S3 resume decision point and the call to
+	 * "write_tables", and the next platform specific entry points are the calls to
+	 * the ACPI table write functions.  The first of ose would seem to be the right
+	 * place, but other table write functions, e.g. the PIRQ table write function, are
+	 * called before the ACPI tables are written.  This routine is called at the beginning
+	 * of each of the write functions called prior to the ACPI write functions, so this
+	 * becomes the best place for this call.
+	 */
+#if CONFIG_HAVE_ACPI_RESUME
+	if (acpi_slp_type != 3) {
+		status = agesawrapper_amdinitlate();
+		if(status) {
+			printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+		}
+		status = agesawrapper_amdS3Save();
+		if (status) {
+			printk(BIOS_DEBUG, "agesawrapper_amds3save failed: %x \n", status);
+		}
+	}
+#else
+	status = agesawrapper_amdinitlate();
+	if (status)
+		printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+#endif
+	dev = dev_find_slot(0, PCI_DEVFN(0, 0)); /* clear IoapicSbFeatureEn */
+	pci_write_config32(dev, 0xF8, 0);
+	pci_write_config32(dev, 0xFC, 5); /* TODO: move it to dsdt.asl */
+
+	sbdn_sb800 = 0;
+
+	for (i = 0; i < 3; i++) {
+		bus_sb800[i] = 0;
+	}
+
+	for (i = 0; i < 256; i++) {
+		bus_type[i] = 0; /* default ISA bus. */
+	}
+
+	bus_type[0] = 1;  /* pci */
+
+	//  bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff;
+	bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
+
+	/* sb800 */
+	dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4));
+
+	if (dev) {
+		bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+		bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+		bus_isa++;
+		for (j = bus_sb800[1]; j < bus_isa; j++)
+			bus_type[j] = 1;
+	}
+
+	for (i = 0; i < 4; i++) {
+		dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i));
+		if (dev) {
+			bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+			bus_isa++;
+		}
+	}
+	for (j = bus_sb800[2]; j < bus_isa; j++)
+		bus_type[j] = 1;
+
+	/* I/O APICs:   APIC ID Version State   Address */
+	bus_isa = 10;
+	apicid_base = CONFIG_MAX_CPUS;
+	apicid_sb800 = apicid_base;
+}
diff --git a/src/mainboard/amd/olivehill/irq_tables.c b/src/mainboard/amd/olivehill/irq_tables.c
new file mode 100644
index 0000000..2c3b671
--- /dev/null
+++ b/src/mainboard/amd/olivehill/irq_tables.c
@@ -0,0 +1,112 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam16.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+			    u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+			    u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+			    u8 slot, u8 rfu)
+{
+	pirq_info->bus = bus;
+	pirq_info->devfn = devfn;
+	pirq_info->irq[0].link = link0;
+	pirq_info->irq[0].bitmap = bitmap0;
+	pirq_info->irq[1].link = link1;
+	pirq_info->irq[1].bitmap = bitmap1;
+	pirq_info->irq[2].link = link2;
+	pirq_info->irq[2].bitmap = bitmap2;
+	pirq_info->irq[3].link = link3;
+	pirq_info->irq[3].bitmap = bitmap3;
+	pirq_info->slot = slot;
+	pirq_info->rfu = rfu;
+}
+
+extern u8 bus_isa;
+extern u8 bus_sb800[2];
+extern unsigned long sbdn_sb800;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+	struct irq_routing_table *pirq;
+	struct irq_info *pirq_info;
+	u32 slot_num;
+	u8 *v;
+
+	u8 sum = 0;
+	int i;
+
+	get_bus_conf();		/* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+	/* Align the table to be 16 byte aligned. */
+	addr += 15;
+	addr &= ~15;
+
+	/* This table must be betweeen 0xf0000 & 0x100000 */
+	printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+	pirq = (void *)(addr);
+	v = (u8 *) (addr);
+
+	pirq->signature = PIRQ_SIGNATURE;
+	pirq->version = PIRQ_VERSION;
+
+	pirq->rtr_bus = bus_sb800[0];
+	pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4;
+
+	pirq->exclusive_irqs = 0;
+
+	pirq->rtr_vendor = 0x1002;
+	pirq->rtr_device = 0x4384;
+
+	pirq->miniport_data = 0;
+
+	memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+	pirq_info = (void *)(&pirq->checksum + 1);
+	slot_num = 0;
+
+	/* pci bridge */
+	write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4,
+			0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+			0);
+	pirq_info++;
+
+	slot_num++;
+
+	pirq->size = 32 + 16 * slot_num;
+
+	for (i = 0; i < pirq->size; i++)
+		sum += v[i];
+
+	sum = pirq->checksum - sum;
+
+	if (sum != pirq->checksum) {
+		pirq->checksum = sum;
+	}
+
+	printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+	return (unsigned long)pirq_info;
+}
diff --git a/src/mainboard/amd/olivehill/mainboard.c b/src/mainboard/amd/olivehill/mainboard.c
new file mode 100644
index 0000000..0a3f9a5
--- /dev/null
+++ b/src/mainboard/amd/olivehill/mainboard.c
@@ -0,0 +1,51 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <arch/acpi.h>
+#include "BiosCallOuts.h"
+#include <cpu/amd/agesa/s3_resume.h>
+#include "agesawrapper.h"
+
+/**********************************************
+ * enable the dedicated function in mainboard.
+ **********************************************/
+static void mainboard_enable(device_t dev)
+{
+	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+	/*
+	 * The mainboard is the first place that we get control in ramstage. Check
+	 * for S3 resume and call the approriate AGESA/CIMx resume functions.
+	 */
+#if CONFIG_HAVE_ACPI_RESUME
+	acpi_slp_type = acpi_get_sleep_type();
+	if (acpi_slp_type == 3)
+		agesawrapper_fchs3earlyrestore();
+#endif
+}
+
+struct chip_operations mainboard_ops = {
+	.enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/amd/olivehill/mptable.c b/src/mainboard/amd/olivehill/mptable.c
new file mode 100644
index 0000000..7db7160
--- /dev/null
+++ b/src/mainboard/amd/olivehill/mptable.c
@@ -0,0 +1,245 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+#include <cpu/amd/amdfam15.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include "southbridge/amd/agesa/hudson/hudson.h" /* pm_ioread() */
+
+//-#define IO_APIC_ID    CONFIG_MAX_PHYSICAL_CPUS + 1
+#define IO_APIC_ID    CONFIG_MAX_CPUS
+extern u8 bus_sb800[3];
+
+extern u32 bus_type[256];
+extern u32 sbdn_sb800;
+extern u32 apicid_sb800;
+
+u8 picr_data[0x54] = {
+	0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+	0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x03,0x04,0x05,0x07
+};
+u8 intr_data[0x54] = {
+	0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+	0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x10,0x11,0x12,0x13
+};
+
+static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length)
+{
+	mc->mpc_length += length;
+	mc->mpc_entry_count++;
+}
+
+static void my_smp_write_bus(struct mp_config_table *mc,
+			     unsigned char id, const char *bustype)
+{
+	struct mpc_config_bus *mpc;
+	mpc = smp_next_mpc_entry(mc);
+	memset(mpc, '\0', sizeof(*mpc));
+	mpc->mpc_type = MP_BUS;
+	mpc->mpc_busid = id;
+	memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype));
+	smp_add_mpc_entry(mc, sizeof(*mpc));
+}
+
+static void *smp_write_config_table(void *v)
+{
+	struct mp_config_table *mc;
+	int bus_isa;
+	u32 dword;
+	u8 byte;
+
+	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+	mptable_init(mc, LOCAL_APIC_ADDR);
+	memcpy(mc->mpc_oem, "AMD     ", 8);
+
+	smp_write_processors(mc);
+
+	get_bus_conf();
+
+	//mptable_write_buses(mc, NULL, &bus_isa);
+	my_smp_write_bus(mc, 0, "PCI   ");
+	my_smp_write_bus(mc, 1, "PCI   ");
+	bus_isa = 0x02;
+	my_smp_write_bus(mc, bus_isa, "ISA   ");
+
+	/* I/O APICs:   APIC ID Version State   Address */
+
+	dword = 0;
+	dword = pm_ioread(0x34) & 0xF0;
+	dword |= (pm_ioread(0x35) & 0xFF) << 8;
+	dword |= (pm_ioread(0x36) & 0xFF) << 16;
+	dword |= (pm_ioread(0x37) & 0xFF) << 24;
+	/* Set IO APIC ID onto IO_APIC_ID */
+	write32 (dword, 0x00);
+	write32 (dword + 0x10, IO_APIC_ID << 24);
+	apicid_sb800 = IO_APIC_ID;
+	smp_write_ioapic(mc, apicid_sb800, 0x21, dword);
+
+	smp_write_ioapic(mc, apicid_sb800+1, 0x21, 0xFEC20000);
+	/* PIC IRQ routine */
+	for (byte = 0x0; byte < sizeof(picr_data); byte ++) {
+		outb(byte, 0xC00);
+		outb(picr_data[byte], 0xC01);
+	}
+
+	/* APIC IRQ routine */
+	for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+		outb(byte | 0x80, 0xC00);
+		outb(intr_data[byte], 0xC01);
+	}
+#if 0
+	outb(0x0B, 0xCD6);
+	outb(0x02, 0xCD7);
+
+	outb(0x50, 0xCD6);
+	outb(0x1F, 0xCD7);
+
+	outb(0x48, 0xCD6);
+	outb(0xF2, 0xCD7);
+
+	//outb(0xBE, 0xCD6);
+	//outb(0x52, 0xCD7);
+
+	outb(0xED, 0xCD6);
+	outb(0x17, 0xCD7);
+
+	*(volatile u8 *) (0xFED80D00 + 0x31) = 2;
+	*(volatile u8 *) (0xFED80D00 + 0x32) = 2;
+	*(volatile u8 *) (0xFED80D00 + 0x33) = 2;
+	*(volatile u8 *) (0xFED80D00 + 0x34) = 2;
+
+	*(volatile u8 *) (0xFED80100 + 0x31) = 0xc8;
+	*(volatile u8 *) (0xFED80100 + 0x32) = 0xc8;
+	*(volatile u8 *) (0xFED80100 + 0x33) = 0xc8;
+	*(volatile u8 *) (0xFED80100 + 0x34) = 0xa0;
+
+	*(volatile u8 *) (0xFED80D00 + 0x6c) = 1;
+	*(volatile u8 *) (0xFED80D00 + 0x6E) = 2;
+	*(volatile u8 *) (0xFED80D00 + 0x6f) = 2;
+
+	*(volatile u8 *) (0xFED80100 + 0x6c) = 0xa0;
+	*(volatile u8 *) (0xFED80100 + 0x6E) = 0xa8;
+	*(volatile u8 *) (0xFED80100 + 0x6f) = 0xa0;
+
+	*(volatile u8 *) (0xFED80D00 + 0xA6) = 2;
+	*(volatile u8 *) (0xFED80100 + 0xA6) = 0;
+
+	*(volatile u8 *) (0xFED80100 + 0x40) = 0xC8;
+#endif
+	/* I/O Ints:    Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin)				\
+	smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+	mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0);
+
+	/* PCI interrupts are level triggered, and are
+	 * associated with a specific bus/device/function tuple.
+	 */
+#define PCI_INT(bus, dev, int_sign, pin)				\
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_sb800, (pin))
+
+	/* Internal VGA */
+	PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
+	PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
+
+	/* SMBUS */
+	PCI_INT(0x0, 0x14, 0x0, 0x10);
+
+	/* HD Audio */
+	PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]);
+
+	/* USB */
+	PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]);
+	PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
+	PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
+	PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
+	PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
+	PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
+	PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]);
+
+	/* sata */
+	PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]);
+	PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
+
+	/* on board NIC & Slot PCIE.  */
+
+	/* PCI slots */
+	/* PCI_SLOT 0. */
+	PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14);
+	PCI_INT(bus_sb800[1], 0x5, 0x1, 0x15);
+	PCI_INT(bus_sb800[1], 0x5, 0x2, 0x16);
+	PCI_INT(bus_sb800[1], 0x5, 0x3, 0x17);
+
+	/* PCI_SLOT 1. */
+	PCI_INT(bus_sb800[1], 0x6, 0x0, 0x15);
+	PCI_INT(bus_sb800[1], 0x6, 0x1, 0x16);
+	PCI_INT(bus_sb800[1], 0x6, 0x2, 0x17);
+	PCI_INT(bus_sb800[1], 0x6, 0x3, 0x14);
+
+	/* PCI_SLOT 2. */
+	PCI_INT(bus_sb800[1], 0x7, 0x0, 0x16);
+	PCI_INT(bus_sb800[1], 0x7, 0x1, 0x17);
+	PCI_INT(bus_sb800[1], 0x7, 0x2, 0x14);
+	PCI_INT(bus_sb800[1], 0x7, 0x3, 0x15);
+
+	PCI_INT(bus_sb800[2], 0x0, 0x0, 0x12);
+	PCI_INT(bus_sb800[2], 0x0, 0x1, 0x13);
+	PCI_INT(bus_sb800[2], 0x0, 0x2, 0x14);
+
+	/* PCIe Lan*/
+	PCI_INT(0x0, 0x06, 0x0, 0x13);
+
+	/* FCH PCIe PortA */
+	PCI_INT(0x0, 0x15, 0x0, 0x10);
+	/* FCH PCIe PortB */
+	PCI_INT(0x0, 0x15, 0x1, 0x11);
+	/* FCH PCIe PortC */
+	PCI_INT(0x0, 0x15, 0x2, 0x12);
+	/* FCH PCIe PortD */
+	PCI_INT(0x0, 0x15, 0x3, 0x13);
+
+	/*Local Ints:   Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+	IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0);
+	IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1);
+	/* There is no extension information... */
+
+	/* Compute the checksums */
+	return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+	void *v;
+	v = smp_write_floating_table(addr, 0);
+	return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/amd/olivehill/romstage.c b/src/mainboard/amd/olivehill/romstage.c
new file mode 100644
index 0000000..8a967e1
--- /dev/null
+++ b/src/mainboard/amd/olivehill/romstage.c
@@ -0,0 +1,176 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/stages.h>
+#include <device/pnp_def.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <console/loglevel.h>
+#include "agesawrapper.h"
+#include "cpu/x86/bist.h"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "southbridge/amd/agesa/hudson/hudson.h"
+#include "cpu/amd/agesa/s3_resume.h"
+#include "src/drivers/pc80/i8254.c"
+#include "src/drivers/pc80/i8259.c"
+#include "cbmem.h"
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx);
+void disable_cache_as_ram(void);
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+	u32 val;
+#if CONFIG_HAVE_ACPI_RESUME
+	void *resume_backup_memory;
+#endif
+
+	/* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
+	 *  LpcClk[1:0]".  To be consistent with Parmer, setting to 4mA
+	 *  even though the register is not documented in the Kabini BKDG.
+	 *  Otherwise the serial output is bad code.
+	 */
+	outb(0xD2, 0xcd6);
+	outb(0x00, 0xcd7);
+
+	val = agesawrapper_amdinitmmio();
+
+	hudson_lpc_port80();
+
+	if (!cpu_init_detectedx && boot_cpu()) {
+		post_code(0x30);
+
+		post_code(0x31);
+		console_init();
+	}
+
+	/* Halt if there was a built in self test failure */
+	post_code(0x34);
+	report_bist_failure(bist);
+
+	/* Load MPB */
+	val = cpuid_eax(1);
+	printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+	printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+	/* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */
+	int i;
+	for(i = 0; i < 200000; i++)
+		val = inb(0xcd6);
+
+	post_code(0x37);
+	val = agesawrapper_amdinitreset();
+	if(val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val);
+	}
+
+	post_code(0x38);
+	printk(BIOS_DEBUG, "Got past sb800_early_setup\n");
+
+	post_code(0x39);
+
+	val = agesawrapper_amdinitearly ();
+	if(val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val);
+	}
+	printk(BIOS_DEBUG, "Got past agesawrapper_amdinitearly\n");
+
+#if CONFIG_HAVE_ACPI_RESUME
+	if (!acpi_is_wakeup_early()) { /* Check for S3 resume */
+#endif
+		post_code(0x40);
+		val = agesawrapper_amdinitpost ();
+		if(val) {
+			printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val);
+		}
+		printk(BIOS_DEBUG, "Got past agesawrapper_amdinitpost\n");
+
+		post_code(0x41);
+		val = agesawrapper_amdinitenv ();
+		if(val) {
+			printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val);
+		}
+		printk(BIOS_DEBUG, "Got past agesawrapper_amdinitenv\n");
+		/* TODO: Disable cache is not ok. */
+		disable_cache_as_ram();
+#if CONFIG_HAVE_ACPI_RESUME
+	} else { /* S3 detect */
+		printk(BIOS_INFO, "S3 detected\n");
+
+		post_code(0x60);
+		printk(BIOS_DEBUG, "agesawrapper_amdinitresume ");
+		val = agesawrapper_amdinitresume();
+		if (val)
+			printk(BIOS_DEBUG, "error level: %x \n", val);
+		else
+			printk(BIOS_DEBUG, "passed.\n");
+
+		printk(BIOS_DEBUG, "agesawrapper_amds3laterestore ");
+		val = agesawrapper_amds3laterestore ();
+		if (val)
+			printk(BIOS_DEBUG, "error level: %x \n", val);
+		else
+			printk(BIOS_DEBUG, "passed.\n");
+
+		post_code(0x61);
+		printk(BIOS_DEBUG, "Find resume memory location\n");
+		resume_backup_memory = (void *)backup_resume();
+
+		post_code(0x62);
+		printk(BIOS_DEBUG, "Move CAR stack.\n");
+		move_stack_high_mem();
+		printk(BIOS_DEBUG, "stack moved to: 0x%x\n", (u32) (resume_backup_memory + HIGH_MEMORY_SAVE));
+
+		post_code(0x63);
+		disable_cache_as_ram();
+		printk(BIOS_DEBUG, "CAR disabled.\n");
+		set_resume_cache();
+
+		/*
+		 * Copy the system memory that is in the ramstage area to the
+		 * reserved area.
+		 */
+		if (resume_backup_memory)
+			memcpy(resume_backup_memory, (void *)(CONFIG_RAMBASE), HIGH_MEMORY_SAVE);
+
+		printk(BIOS_DEBUG, "System memory saved. OK to load ramstage.\n");
+	}
+#endif
+
+	outb(0xEA, 0xCD6);
+	outb(0x1, 0xcd7);
+	/* Initialize i8259 pic */
+	post_code(0x41);
+	setup_i8259 ();
+
+	/* Initialize i8254 timers */
+	post_code(0x42);
+	setup_i8254 ();
+
+	post_code(0x50);
+	copy_and_run();
+
+	post_code(0x54);  /* Should never see this post code. */
+}



More information about the coreboot-gerrit mailing list