[coreboot-gerrit] New patch to review for coreboot: d21c55a Remove Visual Studio remnants.
Idwer Vollering (vidwer@gmail.com)
gerrit at coreboot.org
Fri Dec 6 21:52:30 CET 2013
Idwer Vollering (vidwer at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4489
-gerrit
commit d21c55ac3beec646733710ddabe1694e4bd8bce0
Author: Idwer Vollering <vidwer at gmail.com>
Date: Fri Dec 6 21:48:38 2013 +0000
Remove Visual Studio remnants.
Delete .bat files that were (overlooked and) needed to
build with Visual Studio.
Change-Id: I6b6cece178917ad9da1081eb6b1bb9be33066a77
Signed-off-by: Idwer Vollering <vidwer at gmail.com>
---
.../amd/agesa/f12/Legacy/Proc/Legacy.bat | 259 -------------------
.../amd/agesa/f14/Legacy/Proc/Legacy.bat | 286 ---------------------
2 files changed, 545 deletions(-)
diff --git a/src/vendorcode/amd/agesa/f12/Legacy/Proc/Legacy.bat b/src/vendorcode/amd/agesa/f12/Legacy/Proc/Legacy.bat
deleted file mode 100755
index 7d6d776..0000000
--- a/src/vendorcode/amd/agesa/f12/Legacy/Proc/Legacy.bat
+++ /dev/null
@@ -1,259 +0,0 @@
- at echo off
-goto Begin
-:Documentation
-echo off
-echo **************************************************************************
-echo * Legacy.Bat
-echo * This batchfile establishes the build environment for an AGESA(TM)
-echo * legacy build.
-echo *
-echo * Syntax:
-echo * Legacy.bat Solution [DevTipPath] [DevKey] [DoxKey] [Release^|Debug] [Internal]
-echo * Parameters:
-echo * %% 1 Solution name. This is the AMD Platform Solution name that
-echo * identifies the delivery package. No default, this
-echo * parameter MUST be specified. This parameter MUST
-echo * be specified before the DevTip Path parameter.
-echo * %% 2 Path to the platform specific build directory. This is
-echo * where the options file %%Solution%%Options.c is located,
-echo * which contains the platform specific build option settings.
-echo * If left blank, the default %%Solution%%Options.c file from
-echo * the AGESA\Addendum directory is used.
-echo * %% 3 Developer's key - open an interactive MSVS window. This parameter is
-echo * optional, but when used it requires the first two parameters.
-echo * %% 4 Documentation Key - requests a compilation of the DOxygen
-echo * documentation files. key is "DOX". This parameter is
-echo * optional, but when used it requires the first two parameters.
-echo * %% 5 Build Configuration. There are two choices, "Release" and "Debug".
-echo * Debug is the default choice if not specified. This parameter is
-echo * optional, but when used it requires the first two parameters.
-echo * %% 6 Internal solution file select - choose a internal solution file.This parameter
-echo * is optional, but when used it requires the first two parameters.
-echo * NOTE: The paths MUST have a trailing '\' character.
-echo *
-echo * The AGESA build environment requires the following environment
-echo * variables MUST be defined for proper operation:
-echo * $(AGESA_ROOT) - identifies the directory where the AGESA code
-echo * is located. The top most dir; where AGESA.h is located.
-echo * This must be the full path, eg D:\myPlatform\AGESA\
-echo * **** This var is expected to be set by the caller ****
-echo *
-echo * $(Solution) - identifies the Platform Solution being targeted
-echo * $(AGESA_OptsDir) - identifies the directory where the platform
-echo * options and customization files are located.
-echo * This must be the full path
-echo *
-echo * Optional build environment variables
-echo *
-echo * set AGESA_B1_ADDRESS=0xFFF?????
-echo * Sets the B1 image base address in the ROM (otherwise 0xFFFD0000).
-echo * set AGESA_B2_ADDRESS=0xFFF?????
-echo * Sets the B2 image base address in the ROM (otherwise 0xFFFA0000).
-echo *
-echo * NOTE: The paths MUST have a trailing '\' character.
-echo **************************************************************************
-goto Exit
-
-:Begin
-rem Clear working vars...
-set DevKey=
-set DoxKey=
-set Solution=
-set Configuration=
-
-rem set default to external file prefix none
-set SolutionType=
-
-rem Validate the AGESA_ROOT variable
-IF "%AGESA_ROOT%"=="" goto Else001
- rem User has set a path for Agesa_Root, verify that path...
- IF EXIST %AGESA_ROOT%Agesa.h goto EndIf002
- rem Try adding trailing '\'
- set AGESA_ROOT=%AGESA_ROOT%\
- IF EXIST %AGESA_ROOT%Agesa.h goto EndIf003
- echo Build ERROR: Environment variable AGESA_ROOT is invalid,
- echo Build ERROR: Could not find file Agesa.h at: %AGESA_ROOT%
- pause
- goto Documentation
- :EndIf003
- :EndIf002
- goto EndIf001
-:Else001
- echo Build ERROR: Required environment variable missing: AGESA_ROOT
- pause
- goto Documentation
-:EndIf001
-
-rem Start processing the input parameters...
-:DoLoop
- rem Switch (%1)
- IF /I "%1"=="DevKey" goto Case001
- IF /I "%1"=="Maranello" goto Case002
- IF /I "%1"=="DevTest" goto Case002
- IF /I "%1"=="Danube" goto Case002
- IF /I "%1"=="DanNi" goto Case002
- IF /I "%1"=="Deccan" goto Case002
- IF /I "%1"=="Nile" goto Case002
- IF /I "%1"=="Dragon" goto Case002
- IF /I "%1"=="SanMarino" goto Case002
- IF /I "%1"=="Scorpius" goto Case002
- IF /I "%1"=="Sabine" goto Case002
- IF /I "%1"=="Lynx" goto Case002
- IF /I "%1"=="Brazos" goto Case002
- IF /I "%1"=="Comal" goto Case002
- IF /I "%1"=="Virgo" goto Case002
- IF /I "%1"=="DOX" goto Case009
- IF /I "%1"=="Debug" goto Case011
- IF /I "%1"=="Release" goto Case011
- IF /I "%1"=="Internal" goto Case012
- IF "%1"=="" goto Case006
- goto Case004
- :Case001
- rem Case 1: Special command param
- set DevKey=DevKey
- goto EndSwitch
- :Case002
- rem Case 2: Solution name parameter
- rem Set the Platform Solution name for the build environment
- rem Validation of the names was done by the IF's at the top of DoLoop
- set Solution=%1
- goto EndSwitch
- :Case004
- rem Case 4: Path param, check for validity
- rem Check if parameter matches the default
- rem Check for shortcut versions of the default. Also
- rem checking for missing trailing '\'
- IF /I "%1"=="Addendum" goto Then040
- IF /I "%1"=="Addendum\" goto Then040
- IF /I "%1"=="..\Addendum" goto Then040
- IF /I "%1"=="..\Addendum\" goto Then040
- IF /I "%1"=="..\..\Addendum" goto Then040
- IF /I "%1"=="..\..\Addendum\" goto Then040
- goto Else040
- :Then040
- set AGESA_OptsDir=%AGESA_ROOT%Addendum\
- Echo Build WARNING: User selected the default options path.
- goto EndIf040
- :Else040
- set AGESA_OptsDir=%1
- rem Non-default path given,
- rem Validate the AGESA_OptsDir parameter ( %%1 = %1 )...
- IF /I "%Solution%"=="" goto Else042
- IF EXIST %AGESA_OptsDir%%Solution%Options.c goto EndIf044
- rem Check if param was missing trailing '\'...
- set AGESA_OptsDir=%AGESA_OptsDir%\
- IF EXIST %AGESA_OptsDir%%Solution%Options.c goto EndIf045
- rem If using the default, assume the release file is in place.
- rem Could not find options file, post an error
- Echo Build ERROR: Path to AGESA options file is not valid...
- Echo . . Could not find options file: %AGESA_OptsDir%%Solution%Options.c
- set AGESA_OptsDir=
- set Solution=
- exit /B 5
- :EndIf045
- :EndIf044
- goto EndIf042
- :Else042
- rem Else042 - parameter ordering error, need to specify solution before tip path
- Echo Build ERROR: The 'Solution' name was not recognized or
- Echo The Solution must be specified before the Development tip path
- Echo . . . Legacy.bat Solution [DevTipPath] [DevKey] [DoxKey]
- exit /B 4
- :EndIf042
- :EndIf040
- goto EndSwitch
- :Case006
- rem Case 6: Parameter is blank, end of list
- rem Validate the required Environment Variables
- IF /I "%Solution%"=="" goto Else066
- IF NOT "%AGESA_OptsDir%"=="" goto Else060
- Rem No path param specified. Use the default file shipped with the AGESA package...
- Echo Build WARNING: Using default options file.
- set AGESA_OptsDir=%AGESA_ROOT%Addendum\
- goto EndIf060
- :Else060
- rem Else060 - tip path may have been set by caller prior to call,
- rem Validate the AGESA_OptsDir parameter ( %%AGESA_OptsDir = %AGESA_OptsDir% )...
- IF EXIST %AGESA_OptsDir%%Solution%Options.c goto EndIf061
- rem Check if param was missing trailing '\'...
- set AGESA_OptsDir=%AGESA_OptsDir%\
- IF EXIST %AGESA_OptsDir%%Solution%Options.c goto EndIf062
- rem If using the default, assume the release file is in place.
- rem Could not find options file, post an error
- Echo Build ERROR: Path to AGESA options file is not valid...
- Echo . . Could not find options file: %AGESA_OptsDir%%Solution%Options.c
- set AGESA_OptsDir=
- set Solution=
- exit /B 4
- :EndIf062
- :EndIf061
- :EndIf060
- goto EndIf066
- :Else066
- rem Else066 - parameter missing error, need to specify 'solution'
- Echo Build ERROR: The Platform Solution name must be specified:
- Echo . . . Legacy.bat Solution [DevTipPath] [DevKey] [DoxKey]
- exit /B 4
- :EndIf066
- goto EndDo
- :Case009
- rem Case 9: Documentation generation key
- set DoxKey=DoxKey
- goto EndSwitch
- :Case011
- rem Case 11: Build Configuration
- set Configuration=%1
- goto EndSwitch
- :Case012
- rem Case 12: Select Internal solution file prefix
- set SolutionType=%1
- goto EndSwitch
- :EndSwitch
- SHIFT
- goto DoLoop
-:EndDo
-
-rem # Ensure that Microsoft Visual Studio 2005 is installed on this machine.
-IF NOT "%VS80COMNTOOLS%"=="" goto EndIf95
-echo ---------------------------------------------------------------------
-echo - Building AGESA ARCH2008 requires Microsoft Visual Studio 2005 -
-echo - Install Visual Studio 2005 and confirm environment -
-echo - variable VS80COMNTOOLS is present. -
-echo ---------------------------------------------------------------------
-pause
-exit
-:EndIf95
-
-rem set the Visual Studio 32-bit development environment
-call "%VS80COMNTOOLS%vsvars32.bat"
-
-rem Launch the documentation generator if selected by the user
-IF NOT "%DoxKey%"=="DoxKey" goto EndIf100
- devenv %AGESA_ROOT%Proc\AgesaDoc.sln /Rebuild "Release|Win32"
-:EndIf100
-
-rem Use the default build configuration if none was specified.
-IF NOT "%Configuration%"=="" goto EndIf110
- set Configuration=Debug
-:EndIf110
-
-rem Check image bases
-IF NOT "%AGESA_B1_ADDRESS%"=="" goto EndIf120
- set AGESA_B1_ADDRESS=0xFFFD0000
-:EndIf120
-IF NOT "%AGESA_B2_ADDRESS%"=="" goto EndIf130
- set AGESA_B2_ADDRESS=0xFFFA0000
-:EndIf130
-
-rem Check if the 'secret' developers' key was used, open an interactive VS window
-IF NOT "%DevKey%"=="DevKey" goto Else140
- set DevKey=
- rem This is the command to open an interactive development window ...
- start /NORMAL devenv.exe %AGESA_ROOT%Legacy\Proc\%Solution%%SolutionType%Legacy.sln /ProjectConfig "%Configuration%|Win32"
- goto EndIf140
-:Else140
- rem Else140 - This is the command to perform a background or automated build ...
- devenv %AGESA_ROOT%Legacy\Proc\%Solution%%SolutionType%Legacy.sln /Rebuild "%Configuration%|Win32"
-:EndIf140
-:Exit
-exit /B 0
diff --git a/src/vendorcode/amd/agesa/f14/Legacy/Proc/Legacy.bat b/src/vendorcode/amd/agesa/f14/Legacy/Proc/Legacy.bat
deleted file mode 100644
index 0b79a98..0000000
--- a/src/vendorcode/amd/agesa/f14/Legacy/Proc/Legacy.bat
+++ /dev/null
@@ -1,286 +0,0 @@
- at echo off
-echo *****************************************************************************
-echo *
-echo * Copyright (c) 2011, Advanced Micro Devices, Inc.
-echo * All rights reserved.
-echo *
-echo * Redistribution and use in source and binary forms, with or without
-echo * modification, are permitted provided that the following conditions are met:
-echo * * Redistributions of source code must retain the above copyright
-echo * notice, this list of conditions and the following disclaimer.
-echo * * Redistributions in binary form must reproduce the above copyright
-echo * notice, this list of conditions and the following disclaimer in the
-echo * documentation and/or other materials provided with the distribution.
-echo * * Neither the name of Advanced Micro Devices, Inc. nor the names of
-echo * its contributors may be used to endorse or promote products derived
-echo * from this software without specific prior written permission.
-echo *
-echo * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-echo * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-echo * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-echo * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
-echo * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-echo * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-echo * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-echo * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-echo * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-echo * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-echo *
-echo * ***************************************************************************
-
-
-goto Begin
-:Documentation
-echo off
-echo **************************************************************************
-echo * Legacy.Bat
-echo * This batchfile establishes the build environment for an AGESA(TM)
-echo * legacy build.
-echo *
-echo * Syntax:
-echo * Legacy.bat Solution [DevTipPath] [DevKey] [DoxKey] [Release^|Debug] [Internal]
-echo * Parameters:
-echo * %% 1 Solution name. This is the AMD Platform Solution name that
-echo * identifies the delivery package. No default, this
-echo * parameter MUST be specified. This parameter MUST
-echo * be specified before the DevTip Path parameter.
-echo * %% 2 Path to the platform specific build directory. This is
-echo * where the options file %%Solution%%Options.c is located,
-echo * which contains the platform specific build option settings.
-echo * If left blank, the default %%Solution%%Options.c file from
-echo * the AGESA\Addendum directory is used.
-echo * %% 3 Developer's key - open an interactive MSVS window. This parameter is
-echo * optional, but when used it requires the first two parameters.
-echo * %% 4 Documentation Key - requests a compilation of the DOxygen
-echo * documentation files. key is "DOX". This parameter is
-echo * optional, but when used it requires the first two parameters.
-echo * %% 5 Build Configuration. There are two choices, "Release" and "Debug".
-echo * Debug is the default choice if not specified. This parameter is
-echo * optional, but when used it requires the first two parameters.
-echo * %% 6 Internal solution file select - choose a internal solution file.This parameter
-echo * is optional, but when used it requires the first two parameters.
-echo * NOTE: The paths MUST have a trailing '\' character.
-echo *
-echo * The AGESA build environment requires the following environment
-echo * variables MUST be defined for proper operation:
-echo * $(AGESA_ROOT) - identifies the directory where the AGESA code
-echo * is located. The top most dir; where AGESA.h is located.
-echo * This must be the full path, eg D:\myPlatform\AGESA\
-echo * **** This var is expected to be set by the caller ****
-echo *
-echo * $(Solution) - identifies the Platform Solution being targeted
-echo * $(AGESA_OptsDir) - identifies the directory where the platform
-echo * options and customization files are located.
-echo * This must be the full path
-echo *
-echo * Optional build environment variables
-echo *
-echo * set AGESA_B1_ADDRESS=0xFFF?????
-echo * Sets the B1 image base address in the ROM (otherwise 0xFFFD0000).
-echo * set AGESA_B2_ADDRESS=0xFFF?????
-echo * Sets the B2 image base address in the ROM (otherwise 0xFFFA0000).
-echo *
-echo * NOTE: The paths MUST have a trailing '\' character.
-echo **************************************************************************
-goto Exit
-
-:Begin
-rem Clear working vars...
-set DevKey=
-set DoxKey=
-set Solution=
-set Configuration=
-
-rem set default to external file prefix none
-set SolutionType=
-
-rem Validate the AGESA_ROOT variable
-IF "%AGESA_ROOT%"=="" goto Else001
- rem User has set a path for Agesa_Root, verify that path...
- IF EXIST %AGESA_ROOT%Agesa.h goto EndIf002
- rem Try adding trailing '\'
- set AGESA_ROOT=%AGESA_ROOT%\
- IF EXIST %AGESA_ROOT%Agesa.h goto EndIf003
- echo Build ERROR: Environment variable AGESA_ROOT is invalid,
- echo Build ERROR: Could not find file Agesa.h at: %AGESA_ROOT%
- pause
- goto Documentation
- :EndIf003
- :EndIf002
- goto EndIf001
-:Else001
- echo Build ERROR: Required environment variable missing: AGESA_ROOT
- pause
- goto Documentation
-:EndIf001
-
-rem Start processing the input parameters...
-:DoLoop
- rem Switch (%1)
- IF /I "%1"=="DevKey" goto Case001
- IF /I "%1"=="Maranello" goto Case002
- IF /I "%1"=="DevTest" goto Case002
- IF /I "%1"=="Danube" goto Case002
- IF /I "%1"=="DanNi" goto Case002
- IF /I "%1"=="Nile" goto Case002
- IF /I "%1"=="Dragon" goto Case002
- IF /I "%1"=="SanMarino" goto Case002
- IF /I "%1"=="Scorpius" goto Case002
- IF /I "%1"=="Sabine" goto Case002
- IF /I "%1"=="Lynx" goto Case002
- IF /I "%1"=="Brazos" goto Case002
- IF /I "%1"=="DOX" goto Case009
- IF /I "%1"=="Debug" goto Case011
- IF /I "%1"=="Release" goto Case011
- IF /I "%1"=="Internal" goto Case012
- IF "%1"=="" goto Case006
- goto Case004
- :Case001
- rem Case 1: Special command param
- set DevKey=DevKey
- goto EndSwitch
- :Case002
- rem Case 2: Solution name parameter
- rem Set the Platform Solution name for the build environment
- rem Validation of the names was done by the IF's at the top of DoLoop
- set Solution=%1
- goto EndSwitch
- :Case004
- rem Case 4: Path param, check for validity
- rem Check if parameter matches the default
- rem Check for shortcut versions of the default. Also
- rem checking for missing trailing '\'
- IF /I "%1"=="Addendum" goto Then040
- IF /I "%1"=="Addendum\" goto Then040
- IF /I "%1"=="..\Addendum" goto Then040
- IF /I "%1"=="..\Addendum\" goto Then040
- IF /I "%1"=="..\..\Addendum" goto Then040
- IF /I "%1"=="..\..\Addendum\" goto Then040
- goto Else040
- :Then040
- set AGESA_OptsDir=%AGESA_ROOT%Addendum\
- Echo Build WARNING: User selected the default options path.
- goto EndIf040
- :Else040
- set AGESA_OptsDir=%1
- rem Non-default path given,
- rem Validate the AGESA_OptsDir parameter ( %%1 = %1 )...
- IF /I "%Solution%"=="" goto Else042
- IF EXIST %AGESA_OptsDir%%Solution%Options.c goto EndIf044
- rem Check if param was missing trailing '\'...
- set AGESA_OptsDir=%AGESA_OptsDir%\
- IF EXIST %AGESA_OptsDir%%Solution%Options.c goto EndIf045
- rem If using the default, assume the release file is in place.
- rem Could not find options file, post an error
- Echo Build ERROR: Path to AGESA options file is not valid...
- Echo . . Could not find options file: %AGESA_OptsDir%%Solution%Options.c
- set AGESA_OptsDir=
- set Solution=
- exit /B 5
- :EndIf045
- :EndIf044
- goto EndIf042
- :Else042
- rem Else042 - parameter ordering error, need to specify solution before tip path
- Echo Build ERROR: The 'Solution' name was not recognized or
- Echo The Solution must be specified before the Development tip path
- Echo . . . Legacy.bat Solution [DevTipPath] [DevKey] [DoxKey]
- exit /B 4
- :EndIf042
- :EndIf040
- goto EndSwitch
- :Case006
- rem Case 6: Parameter is blank, end of list
- rem Validate the required Environment Variables
- IF /I "%Solution%"=="" goto Else066
- IF NOT "%AGESA_OptsDir%"=="" goto Else060
- Rem No path param specified. Use the default file shipped with the AGESA package...
- Echo Build WARNING: Using default options file.
- set AGESA_OptsDir=%AGESA_ROOT%Addendum\
- goto EndIf060
- :Else060
- rem Else060 - tip path may have been set by caller prior to call,
- rem Validate the AGESA_OptsDir parameter ( %%AGESA_OptsDir = %AGESA_OptsDir% )...
- IF EXIST %AGESA_OptsDir%%Solution%Options.c goto EndIf061
- rem Check if param was missing trailing '\'...
- set AGESA_OptsDir=%AGESA_OptsDir%\
- IF EXIST %AGESA_OptsDir%%Solution%Options.c goto EndIf062
- rem If using the default, assume the release file is in place.
- rem Could not find options file, post an error
- Echo Build ERROR: Path to AGESA options file is not valid...
- Echo . . Could not find options file: %AGESA_OptsDir%%Solution%Options.c
- set AGESA_OptsDir=
- set Solution=
- exit /B 4
- :EndIf062
- :EndIf061
- :EndIf060
- goto EndIf066
- :Else066
- rem Else066 - parameter missing error, need to specify 'solution'
- Echo Build ERROR: The Platform Solution name must be specified:
- Echo . . . Legacy.bat Solution [DevTipPath] [DevKey] [DoxKey]
- exit /B 4
- :EndIf066
- goto EndDo
- :Case009
- rem Case 9: Documentation generation key
- set DoxKey=DoxKey
- goto EndSwitch
- :Case011
- rem Case 11: Build Configuration
- set Configuration=%1
- goto EndSwitch
- :Case012
- rem Case 12: Select Internal solution file prefix
- set SolutionType=%1
- goto EndSwitch
- :EndSwitch
- SHIFT
- goto DoLoop
-:EndDo
-
-rem # Ensure that Microsoft Visual Studio 2005 is installed on this machine.
-IF NOT "%VS80COMNTOOLS%"=="" goto EndIf95
-echo ---------------------------------------------------------------------
-echo - Building AGESA ARCH2008 requires Microsoft Visual Studio 2005 -
-echo - Install Visual Studio 2005 and confirm environment -
-echo - variable VS80COMNTOOLS is present. -
-echo ---------------------------------------------------------------------
-pause
-exit
-:EndIf95
-
-rem set the Visual Studio 32-bit development environment
-call "%VS80COMNTOOLS%vsvars32.bat"
-
-rem Launch the documentation generator if selected by the user
-IF NOT "%DoxKey%"=="DoxKey" goto EndIf100
- devenv %AGESA_ROOT%Proc\AgesaDoc.sln /Rebuild "Release|Win32"
-:EndIf100
-
-rem Use the default build configuration if none was specified.
-IF NOT "%Configuration%"=="" goto EndIf110
- set Configuration=Debug
-:EndIf110
-
-rem Check image bases
-IF NOT "%AGESA_B1_ADDRESS%"=="" goto EndIf120
- set AGESA_B1_ADDRESS=0xFFFD0000
-:EndIf120
-IF NOT "%AGESA_B2_ADDRESS%"=="" goto EndIf130
- set AGESA_B2_ADDRESS=0xFFFA0000
-:EndIf130
-
-rem Check if the 'secret' developers' key was used, open an interactive VS window
-IF NOT "%DevKey%"=="DevKey" goto Else140
- set DevKey=
- rem This is the command to open an interactive development window ...
- start /NORMAL devenv.exe %AGESA_ROOT%Legacy\Proc\%Solution%%SolutionType%Legacy.sln /ProjectConfig "%Configuration%|Win32"
- goto EndIf140
-:Else140
- rem Else140 - This is the command to perform a background or automated build ...
- devenv %AGESA_ROOT%Legacy\Proc\%Solution%%SolutionType%Legacy.sln /Rebuild "%Configuration%|Win32"
-:EndIf140
-:Exit
-exit /B 0
More information about the coreboot-gerrit
mailing list