[coreboot-gerrit] Patch merged into coreboot/master: 27ed80b AMD Steppe Eagle: Add northbridge files for new SoC family

[gerrit at coreboot.org]

the following patch was just integrated into master:
commit 27ed80bce1da2d17fecd342a8150f790939150a1
Author: Bruce Griffith <Bruce.Griffith at se-eng.com>
Date:   Fri Aug 15 11:46:25 2014 -0600

    AMD Steppe Eagle: Add northbridge files for new SoC family
    
    Add the northbridge file for AMD's new Mullins and Steppe Eagle
    processor family.  Since the processor family name is not the
    same across AMD's sales and marketing channels, I have elected
    to use part of the processor ID as the family name.  The intent
    is to reduce confusion since the processor ID is the same for
    both families.  This northbridge support has only been validated
    on the AMD Embedded variants ("Steppe Eagle").
    
    The AGESA wrappers in coreboot have a function that is intended to
    mirror the UMA memory allocation performed during memory initialization
    by AGESA.  Update the Steppe Eagle memory allocation to mimic the
    memory reservation done inside the AGESA BLOB.
    
    Change the default CBMEM address, the default video BIOS device ID,
    and a couple of other defaults to match changes in coreboot community
    code.
    
    The northbridge chip.h specifies how many processor sockets, how
    many channels, and how many DIMM slots are supported by the
    northbridge.  Steppe Eagle does not permit multisocket systems
    and has only one memory controller channel.
    
    Change-Id: I20d8b78e3b153cda2dd05100fbb75e2ebadd9e08
    Signed-off-by: Bruce Griffith <Bruce.Griffith at se-eng.com>
    Reviewed-on: http://review.coreboot.org/6678
    Tested-by: build bot (Jenkins)
    Reviewed-by: WANG Siyuan <wangsiyuanbuaa at gmail.com>
    Reviewed-by: Zheng Bao <zheng.bao at amd.com>


See http://review.coreboot.org/6678 for details.

-gerrit