[coreboot-gerrit] Patch set updated for coreboot: 5eeeafd uart: Do not guard entire include file by config options

Kyösti Mälkki (kyosti.malkki@gmail.com) gerrit at coreboot.org
Mon Feb 17 20:56:49 CET 2014


Kyösti Mälkki (kyosti.malkki at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4585

-gerrit

commit 5eeeafddb9ae5f9a338e0ae32f702fe430778c43
Author: Kyösti Mälkki <kyosti.malkki at gmail.com>
Date:   Mon Feb 17 11:36:29 2014 +0200

    uart: Do not guard entire include file by config options
    
    Do not guard the file by CONFIG_CONSOLE_SERIAL8250 or
    CONFIG_CONSOLE_SERIAL8250MEM or CONFIG_CONSOLE_SERIAL.
    
    Don't do indirect includes for <uart8250.h>.
    
    The config-specific options are already properly guarded, and there
    is no need to guard the register and bit definitions.
    
    Change-Id: I7528b18cdc62bc5c22486f037e14002838a2176e
    Signed-off-by: Alexandru Gagniuc <mr.nuke.me at gmail.com>
    Signed-off-by: Kyösti Mälkki <kyosti.malkki at gmail.com>
---
 src/cpu/allwinner/a10/uart.c |  5 -----
 src/include/uart.h           | 14 --------------
 src/include/uart8250.h       |  5 -----
 3 files changed, 24 deletions(-)

diff --git a/src/cpu/allwinner/a10/uart.c b/src/cpu/allwinner/a10/uart.c
index dc98bff..97ac302 100644
--- a/src/cpu/allwinner/a10/uart.c
+++ b/src/cpu/allwinner/a10/uart.c
@@ -7,11 +7,6 @@
 
 #include "uart.h"
 #include <arch/io.h>
-
-/* Give me my 8250 UART definitions!!!! */
-/* TODO: Clean this up when uart8250mem works on ARM */
-#undef CONFIG_CONSOLE_SERIAL8250MEM
-#define CONFIG_CONSOLE_SERIAL8250MEM 1
 #include <uart8250.h>
 
 /**
diff --git a/src/include/uart.h b/src/include/uart.h
index e24699b..98d77e7 100644
--- a/src/include/uart.h
+++ b/src/include/uart.h
@@ -17,12 +17,6 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
-/* madness. Uarts are a mess. If you include this file, it
- * includes ALL uart implementations which may be needed.
- * No need to include them separately, and include this file FIRST.
- * At least one (but at most one) of the files needs to define
- * uart_init().
- */
 #ifndef UART_H
 #define UART_H
 
@@ -36,19 +30,11 @@ unsigned int uart_platform_refclk(void);
 unsigned int uart_baudrate_divisor(unsigned int refclk);
 
 
-#if CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM
-#include <uart8250.h>
-#endif
-
-#if CONFIG_CONSOLE_SERIAL_UART
 unsigned char uart_rx_byte(void);
 void uart_tx_byte(unsigned char data);
 void uart_tx_flush(void);
 void uart_init(void);
-#endif
 
-#if CONFIG_HAVE_UART_MEMORY_MAPPED
 uint32_t uartmem_getbaseaddr(void);
-#endif
 
 #endif /* UART_H */
diff --git a/src/include/uart8250.h b/src/include/uart8250.h
index 0c5ee77..112cd44 100644
--- a/src/include/uart8250.h
+++ b/src/include/uart8250.h
@@ -20,8 +20,6 @@
 #ifndef UART8250_H
 #define UART8250_H
 
-#if CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM
-
 /* Data */
 #define UART_RBR 0x00
 #define UART_TBR 0x00
@@ -116,7 +114,6 @@ void uart8250_tx_flush(unsigned base_port);
  * have three different sets of uart code, so it's an improvement.
  */
 void uart8250_init(unsigned base_port, unsigned divisor);
-void uart_init(void);
 #endif
 #if CONFIG_CONSOLE_SERIAL8250MEM
 void uartmem_init(void);
@@ -137,6 +134,4 @@ void oxford_init(void);
 #endif
 #endif
 
-#endif /* CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM */
-
 #endif /* UART8250_H */



More information about the coreboot-gerrit mailing list