[coreboot-gerrit] Patch merged into coreboot/master: 0b4b230 bayleybay_fsp: Switch from EHCI controller to XHCI
gerrit at coreboot.org
gerrit at coreboot.org
Thu Jun 26 01:32:31 CEST 2014
the following patch was just integrated into master:
commit 0b4b230163c82e74e7ac9b74c0c8f8e4abe9130e
Author: Martin Roth <martin.roth at se-eng.com>
Date: Wed Jun 25 10:13:22 2014 -0600
bayleybay_fsp: Switch from EHCI controller to XHCI
- Disable the EHCI controller and enable the XHCI controller.
SeaBIOS has been tested on the board and boots an OS from a
flashdrive at SuperSpeed.
This also enables the top USB port on the 2-port stack, which goes
through a High Speed Inter-Chip port. The HSIC port is only enabled
through the XHCI device.
Change-Id: Ic3dfc55028fa5e081a30819fe9596b1a9f57fd9c
Signed-off-by: Martin Roth <martin.roth at se-eng.com>
Reviewed-on: http://review.coreboot.org/6106
Reviewed-by: Dave Frodin <dave.frodin at se-eng.com>
Tested-by: build bot (Jenkins)
See http://review.coreboot.org/6106 for details.
-gerrit
More information about the coreboot-gerrit
mailing list