[coreboot-gerrit] Patch set updated for coreboot: mainboard/asus/kgpe-d16: Enable romstage spinlocks

[Timothy Pearson (tpearson@raptorengineeringinc.com)]

Timothy Pearson (tpearson at raptorengineeringinc.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/12628

-gerrit

commit e500e84b64bbf1fa6476161ecd82e8987fcb7e6a
Author: Timothy Pearson <tpearson at raptorengineeringinc.com>
Date:   Thu Nov 5 13:16:55 2015 -0600

    mainboard/asus/kgpe-d16: Enable romstage spinlocks
    
    Change-Id: Iac1adbeacdcded7faff2443b78a491cbb8a90fe8
    Signed-off-by: Timothy Pearson <tpearson at raptorengineeringinc.com>
---
 src/mainboard/asus/kgpe-d16/Kconfig    |  1 +
 src/mainboard/asus/kgpe-d16/romstage.c | 20 +++++++++++++++-----
 2 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/src/mainboard/asus/kgpe-d16/Kconfig b/src/mainboard/asus/kgpe-d16/Kconfig
index c4f3962..67b43ca 100644
--- a/src/mainboard/asus/kgpe-d16/Kconfig
+++ b/src/mainboard/asus/kgpe-d16/Kconfig
@@ -14,6 +14,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select SOUTHBRIDGE_AMD_SUBTYPE_SP5100
 	select SUPERIO_NUVOTON_NCT5572D
 	select PARALLEL_CPU_INIT
+	select HAVE_ROMSTAGE_CONSOLE_SPINLOCK
 	select HAVE_HARD_RESET
 	select HAVE_OPTION_TABLE
 	select HAVE_CMOS_DEFAULT
diff --git a/src/mainboard/asus/kgpe-d16/romstage.c b/src/mainboard/asus/kgpe-d16/romstage.c
index df76ab4..13eacd2 100644
--- a/src/mainboard/asus/kgpe-d16/romstage.c
+++ b/src/mainboard/asus/kgpe-d16/romstage.c
@@ -312,6 +312,18 @@ static void execute_memory_test(void)
 }
 #endif
 
+static spinlock_t printk_spinlock CAR_GLOBAL;
+
+spinlock_t* romstage_console_lock(void)
+{
+	return car_get_var_ptr(&printk_spinlock);
+}
+
+void initialize_romstage_console_lock(void)
+{
+	car_get_var(printk_spinlock) = SPIN_LOCK_UNLOCKED;
+}
+
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
 	uint32_t esp;
@@ -338,6 +350,9 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 		timestamp_init(timestamp_get());
 		timestamp_add_now(TS_START_ROMSTAGE);
 
+		/* Initialize the printk spinlock */
+		initialize_romstage_console_lock();
+
 		/* Nothing special needs to be done to find bus 0 */
 		/* Allow the HT devices to be found */
 		set_bsp_node_CHtExtNodeCfgEn();
@@ -407,11 +422,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	post_code(0x36);
 
 	/* Wait for all the APs core0 started by finalize_node_setup. */
-	/* FIXME: A bunch of cores are going to start output to serial at once.
-	 * It would be nice to fix up prink spinlocks for ROM XIP mode.
-	 * I think it could be done by putting the spinlock flag in the cache
-	 * of the BSP located right after sysinfo.
-	 */
 	wait_all_core0_started();
 
 	/* run _early_setup before soft-reset. */