[coreboot-gerrit] New patch to review for coreboot: 361a65e northbridge/amd/amdfam10: Move K10 specific menu to proper Kconfig file
Timothy Pearson (tpearson@raptorengineeringinc.com)
gerrit at coreboot.org
Thu Feb 12 08:28:20 CET 2015
Timothy Pearson (tpearson at raptorengineeringinc.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8425
-gerrit
commit 361a65ea2a7a8d71639b82621793c70cbab289d8
Author: Timothy Pearson <tpearson at raptorengineeringinc.com>
Date: Thu Feb 12 01:25:34 2015 -0600
northbridge/amd/amdfam10: Move K10 specific menu to proper Kconfig file
Change-Id: Ib83ec5c397fdef5aa9e3376f1c0072cfa2f74fa6
Signed-off-by: Timothy Pearson <tpearson at raptorengineeringinc.com>
---
src/northbridge/amd/Kconfig | 134 +----------------------------------
src/northbridge/amd/amdfam10/Kconfig | 132 ++++++++++++++++++++++++++++++++++
2 files changed, 133 insertions(+), 133 deletions(-)
diff --git a/src/northbridge/amd/Kconfig b/src/northbridge/amd/Kconfig
index 17f15c3..4bc6e49 100644
--- a/src/northbridge/amd/Kconfig
+++ b/src/northbridge/amd/Kconfig
@@ -4,136 +4,4 @@ source src/northbridge/amd/amdfam10/Kconfig
source src/northbridge/amd/lx/Kconfig
source src/northbridge/amd/agesa/Kconfig
source src/northbridge/amd/cimx/Kconfig
-source src/northbridge/amd/pi/Kconfig
-
-menu "HyperTransport setup"
- #could be implemented for K8 (NORTHBRIDGE_AMD_AMDK8)
- depends on (NORTHBRIDGE_AMD_AMDFAM10) && EXPERT
-
-choice
- prompt "HyperTransport frequency"
- default LIMIT_HT_SPEED_AUTO
- help
- This option sets the maximum permissible HyperTransport link
- frequency.
-
- Use of this option will only limit the autodetected HT frequency.
- It will not (and cannot) increase the frequency beyond the
- autodetected limits.
-
- This is primarily used to work around poorly designed or laid out
- HT traces on certain motherboards.
-
-config LIMIT_HT_SPEED_200
- bool "Limit HT frequency to 200MHz"
-config LIMIT_HT_SPEED_300
- bool "Limit HT frequency to 300MHz"
-config LIMIT_HT_SPEED_400
- bool "Limit HT frequency to 400MHz"
-config LIMIT_HT_SPEED_500
- bool "Limit HT frequency to 500MHz"
-config LIMIT_HT_SPEED_600
- bool "Limit HT frequency to 600MHz"
-config LIMIT_HT_SPEED_800
- bool "Limit HT frequency to 800MHz"
-config LIMIT_HT_SPEED_1000
- bool "Limit HT frequency to 1.0GHz"
-config LIMIT_HT_SPEED_1200
- bool "Limit HT frequency to 1.2GHz"
-config LIMIT_HT_SPEED_1400
- bool "Limit HT frequency to 1.4GHz"
-config LIMIT_HT_SPEED_1600
- bool "Limit HT frequency to 1.6GHz"
-config LIMIT_HT_SPEED_1800
- bool "Limit HT frequency to 1.8GHz"
-config LIMIT_HT_SPEED_2000
- bool "Limit HT frequency to 2.0GHz"
-config LIMIT_HT_SPEED_2200
- bool "Limit HT frequency to 2.2GHz"
-config LIMIT_HT_SPEED_2400
- bool "Limit HT frequency to 2.4GHz"
-config LIMIT_HT_SPEED_2600
- bool "Limit HT frequency to 2.6GHz"
-config LIMIT_HT_SPEED_AUTO
- bool "Autodetect HT frequency"
-endchoice
-
-choice
- prompt "HyperTransport downlink width"
- default LIMIT_HT_DOWN_WIDTH_16
- help
- This option sets the maximum permissible HyperTransport
- downlink width.
-
- Use of this option will only limit the autodetected HT width.
- It will not (and cannot) increase the width beyond the autodetected
- limits.
-
- This is primarily used to work around poorly designed or laid out HT
- traces on certain motherboards.
-
-config LIMIT_HT_DOWN_WIDTH_8
- bool "8 bits"
-config LIMIT_HT_DOWN_WIDTH_16
- bool "16 bits"
-endchoice
-
-choice
- prompt "HyperTransport uplink width"
- default LIMIT_HT_UP_WIDTH_16
- help
- This option sets the maximum permissible HyperTransport
- uplink width.
-
- Use of this option will only limit the autodetected HT width.
- It will not (and cannot) increase the width beyond the autodetected
- limits.
-
- This is primarily used to work around poorly designed or laid out HT
- traces on certain motherboards.
-
-config LIMIT_HT_UP_WIDTH_8
- bool "8 bits"
-config LIMIT_HT_UP_WIDTH_16
- bool "16 bits"
-endchoice
-
-config AMDMCT_ENABLE_ECC_REDIR
- bool
- depends on CPU_AMD_MODEL_10XXX
- default n
-
-config AMDMCT_BACKGROUND_SCRUB_RATE
- hex
- depends on CPU_AMD_MODEL_10XXX
- default 0x00
- help
- This option sets the background ECC memory scub rate
-
- Permissible values are:
-
- 0x00; Disabled
- 0x01; 40ns
- 0x02; 80ns
- 0x03; 160ns
- 0x04; 320ns
- 0x05; 640ns
- 0x06; 1.28us
- 0x07; 2.56us
- 0x08; 5.12us
- 0x09; 10.2us
- 0x0a; 20.5us
- 0x0b; 41us
- 0x0c; 81.9us
- 0x0d; 163.8us
- 0x0e; 327.7us
- 0x0f; 655.4us
- 0x10; 1.31ms
- 0x11; 2.62ms
- 0x12; 5.24ms
- 0x13; 10.49ms
- 0x14; 20.97sms
- 0x15; 42ms
- 0x16; 84ms
-
-endmenu
+source src/northbridge/amd/pi/Kconfig
\ No newline at end of file
diff --git a/src/northbridge/amd/amdfam10/Kconfig b/src/northbridge/amd/amdfam10/Kconfig
index 13b912e..1c78590 100644
--- a/src/northbridge/amd/amdfam10/Kconfig
+++ b/src/northbridge/amd/amdfam10/Kconfig
@@ -124,4 +124,136 @@ config SVI_HIGH_FREQ
Select this for boards with a Voltage Regulator able to operate
at 3.4 MHz in SVI mode. Ignored unless the AMD CPU is rev C3.
+menu "HyperTransport setup"
+ #could be implemented for K8 (NORTHBRIDGE_AMD_AMDK8)
+ depends on (NORTHBRIDGE_AMD_AMDFAM10) && EXPERT
+
+choice
+ prompt "HyperTransport frequency"
+ default LIMIT_HT_SPEED_AUTO
+ help
+ This option sets the maximum permissible HyperTransport link
+ frequency.
+
+ Use of this option will only limit the autodetected HT frequency.
+ It will not (and cannot) increase the frequency beyond the
+ autodetected limits.
+
+ This is primarily used to work around poorly designed or laid out
+ HT traces on certain motherboards.
+
+config LIMIT_HT_SPEED_200
+ bool "Limit HT frequency to 200MHz"
+config LIMIT_HT_SPEED_300
+ bool "Limit HT frequency to 300MHz"
+config LIMIT_HT_SPEED_400
+ bool "Limit HT frequency to 400MHz"
+config LIMIT_HT_SPEED_500
+ bool "Limit HT frequency to 500MHz"
+config LIMIT_HT_SPEED_600
+ bool "Limit HT frequency to 600MHz"
+config LIMIT_HT_SPEED_800
+ bool "Limit HT frequency to 800MHz"
+config LIMIT_HT_SPEED_1000
+ bool "Limit HT frequency to 1.0GHz"
+config LIMIT_HT_SPEED_1200
+ bool "Limit HT frequency to 1.2GHz"
+config LIMIT_HT_SPEED_1400
+ bool "Limit HT frequency to 1.4GHz"
+config LIMIT_HT_SPEED_1600
+ bool "Limit HT frequency to 1.6GHz"
+config LIMIT_HT_SPEED_1800
+ bool "Limit HT frequency to 1.8GHz"
+config LIMIT_HT_SPEED_2000
+ bool "Limit HT frequency to 2.0GHz"
+config LIMIT_HT_SPEED_2200
+ bool "Limit HT frequency to 2.2GHz"
+config LIMIT_HT_SPEED_2400
+ bool "Limit HT frequency to 2.4GHz"
+config LIMIT_HT_SPEED_2600
+ bool "Limit HT frequency to 2.6GHz"
+config LIMIT_HT_SPEED_AUTO
+ bool "Autodetect HT frequency"
+endchoice
+
+choice
+ prompt "HyperTransport downlink width"
+ default LIMIT_HT_DOWN_WIDTH_16
+ help
+ This option sets the maximum permissible HyperTransport
+ downlink width.
+
+ Use of this option will only limit the autodetected HT width.
+ It will not (and cannot) increase the width beyond the autodetected
+ limits.
+
+ This is primarily used to work around poorly designed or laid out HT
+ traces on certain motherboards.
+
+config LIMIT_HT_DOWN_WIDTH_8
+ bool "8 bits"
+config LIMIT_HT_DOWN_WIDTH_16
+ bool "16 bits"
+endchoice
+
+choice
+ prompt "HyperTransport uplink width"
+ default LIMIT_HT_UP_WIDTH_16
+ help
+ This option sets the maximum permissible HyperTransport
+ uplink width.
+
+ Use of this option will only limit the autodetected HT width.
+ It will not (and cannot) increase the width beyond the autodetected
+ limits.
+
+ This is primarily used to work around poorly designed or laid out HT
+ traces on certain motherboards.
+
+config LIMIT_HT_UP_WIDTH_8
+ bool "8 bits"
+config LIMIT_HT_UP_WIDTH_16
+ bool "16 bits"
+endchoice
+
+config AMDMCT_ENABLE_ECC_REDIR
+ bool
+ depends on CPU_AMD_MODEL_10XXX
+ default n
+
+config AMDMCT_BACKGROUND_SCRUB_RATE
+ hex
+ depends on CPU_AMD_MODEL_10XXX
+ default 0x00
+ help
+ This option sets the background ECC memory scub rate
+
+ Permissible values are:
+
+ 0x00; Disabled
+ 0x01; 40ns
+ 0x02; 80ns
+ 0x03; 160ns
+ 0x04; 320ns
+ 0x05; 640ns
+ 0x06; 1.28us
+ 0x07; 2.56us
+ 0x08; 5.12us
+ 0x09; 10.2us
+ 0x0a; 20.5us
+ 0x0b; 41us
+ 0x0c; 81.9us
+ 0x0d; 163.8us
+ 0x0e; 327.7us
+ 0x0f; 655.4us
+ 0x10; 1.31ms
+ 0x11; 2.62ms
+ 0x12; 5.24ms
+ 0x13; 10.49ms
+ 0x14; 20.97sms
+ 0x15; 42ms
+ 0x16; 84ms
+
+endmenu
+
endif # NORTHBRIDGE_AMD_AMDFAM10
More information about the coreboot-gerrit
mailing list