[coreboot-gerrit] Patch set updated for coreboot: drivers/i2c/w83795: Add option to use auxiliary SMBUS controller
Timothy Pearson (tpearson@raptorengineeringinc.com)
gerrit at coreboot.org
Fri Oct 23 01:27:23 CEST 2015
Timothy Pearson (tpearson at raptorengineeringinc.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12080
-gerrit
commit 8996dda2293b74ec84251cc2eefb7722acd6bd6b
Author: Timothy Pearson <tpearson at raptorengineeringinc.com>
Date: Sat Oct 17 04:37:10 2015 -0500
drivers/i2c/w83795: Add option to use auxiliary SMBUS controller
Change-Id: I5a9b5eba992853b84b0cb6c3a1764edf42ac49b2
Signed-off-by: Timothy Pearson <tpearson at raptorengineeringinc.com>
---
src/drivers/i2c/w83795/chip.h | 7 +++++++
src/drivers/i2c/w83795/w83795.c | 17 +++++++++++++++++
2 files changed, 24 insertions(+)
diff --git a/src/drivers/i2c/w83795/chip.h b/src/drivers/i2c/w83795/chip.h
index c8a42ea..9a3f847 100644
--- a/src/drivers/i2c/w83795/chip.h
+++ b/src/drivers/i2c/w83795/chip.h
@@ -139,4 +139,11 @@ struct drivers_i2c_w83795_config {
uint8_t fan6_duty; /* % of full speed (0-100) */
uint8_t fan7_duty; /* % of full speed (0-100) */
uint8_t fan8_duty; /* % of full speed (0-100) */
+
+ uint8_t smbus_aux; /* 0 == device located on primary SMBUS,
+ * 1 == device located on first auxiliary
+ * SMBUS channel,
+ * <n> == device located on <n> auxiliary
+ * SMBUS channel
+ */
};
diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c
index 0af272f..0f82e1c 100644
--- a/src/drivers/i2c/w83795/w83795.c
+++ b/src/drivers/i2c/w83795/w83795.c
@@ -141,7 +141,18 @@ static void w83795_init(struct device *dev, w83795_fan_mode_t mode, u8 dts_src)
uint8_t val;
uint16_t limit_value;
+#if IS_ENABLED(CONFIG_SMBUS_HAS_AUX_CHANNELS)
+ uint8_t smbus_aux_channel_prev = smbus_current_aux_channel();
+ smbus_switch_to_aux_channel(config->smbus_aux);
+ printk(BIOS_DEBUG, "Set SMBUS controller to channel %d\n", config->smbus_aux);
+#endif
+
if (smbus_read_byte(dev, 0x00) < 0) {
+#if IS_ENABLED(CONFIG_SMBUS_HAS_AUX_CHANNELS)
+ /* Restore SMBUS channel setting */
+ smbus_switch_to_aux_channel(smbus_aux_channel_prev);
+ printk(BIOS_DEBUG, "Set SMBUS controller to channel %d\n", smbus_aux_channel_prev);
+#endif
printk(BIOS_ERR, "W83795G/ADG Nuvoton H/W Monitor not found\n");
return;
}
@@ -332,6 +343,12 @@ static void w83795_init(struct device *dev, w83795_fan_mode_t mode, u8 dts_src)
val = w83795_read(dev, W83795_REG_CONFIG);
val |= W83795_REG_CONFIG_START;
w83795_write(dev, W83795_REG_CONFIG, val);
+
+#if IS_ENABLED(CONFIG_SMBUS_HAS_AUX_CHANNELS)
+ /* Restore SMBUS channel setting */
+ smbus_switch_to_aux_channel(smbus_aux_channel_prev);
+ printk(BIOS_DEBUG, "Set SMBUS controller to channel %d\n", smbus_aux_channel_prev);
+#endif
}
static void w83795_hwm_init(struct device *dev)
More information about the coreboot-gerrit
mailing list