[coreboot-gerrit] Patch set updated for coreboot: Documentation: x86 Enable Serial Output
Leroy P Leahy (leroy.p.leahy@intel.com)
gerrit at coreboot.org
Tue Feb 2 18:09:22 CET 2016
Leroy P Leahy (leroy.p.leahy at intel.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/13444
-gerrit
commit 3af0bc56987b863fdc28595aeb37071ff57ffcdc
Author: Lee Leahy <leroy.p.leahy at intel.com>
Date: Sun Jan 31 11:15:56 2016 -0800
Documentation: x86 Enable Serial Output
Document the steps necessary to enable serial output
TEST=None
Change-Id: Ifc0e700d7ef54fb1e28ca9bca34b94cccd3633ac
Signed-off-by: Lee Leahy <leroy.p.leahy at intel.com>
---
Documentation/Intel/Board/board.html | 25 ++++++++++++++++++++
Documentation/Intel/SoC/soc.html | 44 ++++++++++++++++++++++++++++++++++++
Documentation/Intel/development.html | 28 +++++++++++++++++++++++
Documentation/Intel/fsp1_1.html | 14 ++++++++++++
4 files changed, 111 insertions(+)
diff --git a/Documentation/Intel/Board/board.html b/Documentation/Intel/Board/board.html
index e43985c..ceb7d0b 100644
--- a/Documentation/Intel/Board/board.html
+++ b/Documentation/Intel/Board/board.html
@@ -14,6 +14,7 @@
</p>
<ol>
<li><a href="#RequiredFiles">Required Files</a></li>
+ <li>Enable <a href="#SerialOutput">Serial Output</a></li>
</ol>
@@ -78,6 +79,30 @@
<hr>
+<h1><a name="SerialOutput">Enable Serial Output</a></h1>
+<p>
+ Use the following steps to enable serial output:
+</p>
+<ol>
+ <li>Implement the car_mainboard_pre_console_init routine in the com_init.c
+ file:
+ <ol type="A">
+ <li>Power on and enable the UART controller</li>
+ <li>Connect the UART receive and transmit data lines to the
+ appropriate SoC pins
+ </li>
+ </ol>
+ </li>
+ <li>Add Makefile.inc
+ <ol type="A">
+ <li>Add com_init.c to romstage</li>
+ </ol>
+ </li>
+</ol>
+
+
+
+<hr>
<p>Modified: 31 January 2016</p>
</body>
</html>
\ No newline at end of file
diff --git a/Documentation/Intel/SoC/soc.html b/Documentation/Intel/SoC/soc.html
index 2c61215..62c30e4 100644
--- a/Documentation/Intel/SoC/soc.html
+++ b/Documentation/Intel/SoC/soc.html
@@ -19,6 +19,11 @@
<li><a href="#EarlyDebug">Early Debug</a></li>
<li><a href="#Bootblock">Bootblock</a></li>
<li><a href="#TempRamInit">TempRamInit</a></li>
+ <li><a href="#Romstage">Romstage</a>
+ <ol type="A">
+ <li>Enable <a href="#SerialOutput">Serial Output"</a></li>
+ </ol>
+ </li>
</ol>
@@ -285,6 +290,45 @@ Use the following steps to debug the call to TempRamInit:
<hr>
+<h1><a name="Romstage">Romstage</a></h1>
+
+<h2><a name="SerialOutput">Serial Output</a></h2>
+<p>
+ The following steps add the serial output support for romstage:
+</p>
+<ol>
+ <li>Create the romstage subdirectory</li>
+ <li>Add romstage/romstage.c
+ <ol type="A">
+ <li>Program the necessary base addresses</li>
+ <li>Disable the TCO</li>
+ </ol>
+ </li>
+ <li>Add romstage/Makefile.inc
+ <ol type="A">
+ <li>Add romstage.c to romstage</li>
+ </ol>
+ </li>
+ <li>Add gpio configuration support if necessary</li>
+ <li>Add the necessary .h files to support the build</li>
+ <li>Update Makefile.inc
+ <ol type="A">
+ <li>Add the romstage subdirectory</li>
+ <li>Add the gpio configuration support file to romstage</li>
+ </ol>
+ </li>
+ <li>Set the necessary Kconfig values to enable serial output:
+ <ul>
+ <li>CONFIG_DRIVERS_UART_<driver>=y</li>
+ <li>CONFIG_CONSOLE_SERIAL=y</li>
+ <li>CONFIG_UART_FOR_CONSOLE=<port></li>
+ <li>CONFIG_CONSOLE_SERIAL_115200=y</li>
+ </ul>
+ </li>
+</ol>
+
+
+<hr>
<p>Modified: 31 January 2016</p>
</body>
</html>
\ No newline at end of file
diff --git a/Documentation/Intel/development.html b/Documentation/Intel/development.html
index 3497b97..ec81aba 100644
--- a/Documentation/Intel/development.html
+++ b/Documentation/Intel/development.html
@@ -71,6 +71,17 @@
<li><a target="_blank" href="SoC/soc.html#EarlyDebug">Early Debug</a></li>
<li>Implement and debug the <a target="_blank" href="SoC/soc.html#Bootblock">bootblock</a> code</li>
<li>Implement and debug the call to <a target="_blank" href="SoC/soc.html#TempRamInit">TempRamInit</a></li>
+ <li>Enable the serial port
+ <ol type="A">
+ <li>Power on, enable and configure GPIOs for the
+ <a target="_blank" href="Board/board.html#SerialOutput">debug serial UART</a>
+ </li>
+ <li>Add the <a target="_blank" href="SoC/soc.html#SerialOutput">serial outupt</a>
+ support to romstage
+ </li>
+ </ol>
+ </li>
+ <li>Enable <a target="_blank" href="fsp1_1.html#CorebootFspDebugging">coreboot/FSP</a> debugging</li>
</ol>
@@ -106,6 +117,23 @@
Disable: CONFIG_DISPLAY_MTRRS=y, MTRRs displayed after call to TempRamExit
</td>
</tr>
+
+
+ <tr bgcolor="#c0ffc0">
+ <th>Board</th>
+ <th>Where</th>
+ <th>Testing</th>
+ </tr>
+ <tr>
+ <td>Serial Port</td>
+ <td>
+ SoC <a target="_blank" href="SoC/soc.html#SerialOutput">Support</a><br>
+ Enable: src/soc/mainboard/<Board>/com_init.c/<a target="_blank" href="Board/board.html#SerialOutput">car_mainboard_pre_console_init</a>
+ </td>
+ <td>Debug serial output works</td>
+ </tr>
+
+
<tr bgcolor="#c0ffc0">
<th>FSP</th>
<th>Where</th>
diff --git a/Documentation/Intel/fsp1_1.html b/Documentation/Intel/fsp1_1.html
index b74ba790..0ee317a 100644
--- a/Documentation/Intel/fsp1_1.html
+++ b/Documentation/Intel/fsp1_1.html
@@ -15,6 +15,7 @@
<ol>
<li><a href="#RequiredFiles">Required Files</a></li>
<li>Add the <a href="#FspBinary">FSP Binary File</a> to the Coreboot File System</li>
+ <li>Enable <a href="#CorebootFspDebugging">coreboot/FSP Debugging</a></li>
</ol>
<p>
@@ -58,6 +59,19 @@
<hr>
+<h1><a name="CorebootFspDebugging">Enable coreboot/FSP Debugging</a></h1>
+<p>
+ Set the following Kconfig values:
+</p>
+<ul>
+ <li>CONFIG_DISPLAY_FSP_ENTRY_POINTS - Display the FSP entry points in romstage</li>
+ <li>CONFIG_DISPLAY_HOBS - Display and verify the hand-off-blocks (HOBs) returned by MemoryInit</li>
+ <li>CONFIG_DISPLAY_VBT - Display Video BIOS Table (VBT) used for GOP</li>
+ <li>CONFIG_DISPLAY_UPD_DATA - Display the user specified product data passed to MemoryInit and SiliconInit</li>
+</ul>
+
+
+<hr>
<p>Modified: 31 January 2016</p>
</body>
</html>
\ No newline at end of file
More information about the coreboot-gerrit
mailing list