Question regarding instructions...
Ronald G. Minnich
rminnich at lanl.gov
Thu Nov 28 23:53:01 CET 2002
On Thu, 28 Nov 2002, steven james wrote:
> You will need either a non-conductive chip extractor. Boot under the
> normal BIOS, pull it, and insert the spare. Program, reboot. If it fails,
> re-insert the original and try again. Most of the boards in the project
> were developed that way.
note that most Radio Shack and Frye's sell these extractors.
ron
More information about the coreboot
mailing list