Flashing the Tyan S2642?
Eric W. Biederman
ebiederman at lnxi.com
Tue Oct 29 18:10:00 CET 2002
Ronald G Minnich <rminnich at lanl.gov> writes:
> On Tue, 29 Oct 2002, Bill Rugolsky Jr. wrote:
> > Last weekend I was looking at installing LinuxBIOS on my Tyan S2462,
> > and got to the point of building the romimage, but couldn't figure out how
> > to flash it. devbios (from CVS) reported (in /proc/bios) that it was an
> > unsupported Macronix part, and flash_rom (from linuxbios CVS) didn't
> > appear to recognize it either.
> you're going to love this. You have to use the setpci command to set the
> write enable for flash.
> Better than that, what you should do is figure out how to make MTD work on
> this board and then tell me what you did, as I can never get it to work.
The drivers should appear to be in 2.4.19. So compile the mtdchar support,
and the jedec_probe support, and the amd766rom support and it should work...
More information about the coreboot