R: Problems with etherboot + AA patch IDE

[Pellanda Luca]

When I run " make bin32/3c900-tpo.ebi"
it's ok but if I try to run "make bin32/3c900-tpo.fd0"
I see the same error.

Regards,
Luca

-----Messaggio originale-----
Da: Adam Agnew [mailto:agnew at cs.umd.edu]
Inviato: giovedì 3 aprile 2003 10.21
A: Pellanda Luca
Cc: 'linuxbios at clustermatic.org'
Oggetto: Re: Problems with etherboot + AA patch IDE


Instead of running "make", run "make bin32/sis900.ebi" or possibly "make
bin32/mynetcard.ebi" if your board doesn't use a sis900 (not that it
should matter, the network booting is left as a fall back if the polled
ide booting doesn't work).

- Adam Agnew


On Thu, 3 Apr 2003, Pellanda Luca wrote:

>
>
> I'm running as 2.11.90.0.29 and compiling etherboot 5.0.6 + the AA IDE
boot
> patch  found on the list causes problems:
>
> gcc -E -Wp,-Wall -DASK_BOOT=3 -DANS_DEFAULT=ANS_NETWORK -DMOTD
-DIMAGE_MENU
> -DBA
> CKOFF_LIMIT=7 -DCONGESTED -DLINUXBIOS -DCONFIG_TSC_CURRTICKS
> -DCONSOLE_SERIAL -
> DCOMCONSOLE=0x3f8 -DCOMPRESERVE -DCONFIG_PCI_DIRECT -DELF_IMAGE
> -DPOLLED_IDE -O
> s -ffreestanding -fstrength-reduce -fomit-frame-pointer -mcpu=i386
> -malign-jumps
> =1 -malign-loops=1 -malign-functions=1 -Wall -W -Wno-format -Wno-unused
> -DVERSIO
> N_MAJOR=5 -DVERSION_MINOR=0 -DVERSION=\"5.0.6\" -DRELOC=0x400000
start32.S
> | as
>   -o bin32/start32.o
> {standard input}: Assembler messages:
> {standard input}:119: Warning: indirect ljmp without `*'
> {standard input}:235: Error: suffix or operands invalid for `ljmp'
> make: *** [bin32/start32.o] Error 1
> I think that RELOC is not good value. Why ?
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20030403/df11a531/attachment.html>