Error ...

[Denis Pilon]

Thanks Jim.

Removing the i2c prevented the problem.

But I will try to see where lm_sensors is messing up the bus.

Denis

On Fri, 2003-04-18 at 15:48, Jim Garlick wrote:
> Sounds very similar to a problem observed on the SuperMicro P4DPR/DPE which
> has the same winbond sensor chip.  The solution was to tell lm_sensors to
> access the Winbond via ISA rather than I2C.
> 
> I think there is also some code in the p4dpr/p4dpe linuxbios port to notice
> the memory initialization problem and work around it (e.g. wait a while
> and reset?)  The details have faded but you might check the code.
> 
> Jim
> 
> On Fri, 18 Apr 2003, Denis Pilon wrote:
> 
> > I've got linuxbios somewhat working with the SuperMicro X5DPE-G2, but I
> > have discovered one problem.
> >
> > If I run lm_sensors and initialize the chips, the node will not reboot.
> > It gives me a no memory error at boot.
> >
> > Has anyone seen this? How do I start debuggin ?
> >
> > Denis
> >
> >
-- 

 ===================================================
 Denis E. Pilon
 Systems Integration Specialist
 Atipa Technologies http://www.atipa.com/
 dpilon at atipa.com (785)841-9513 x3111
 ===================================================
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20030418/2bb07117/attachment.sig>