Using ADLO with Linuxbios

[Deepak Kotian]

Good information.


Can someone please stick out the config file content over here for the
following situation,

Case 1:
1.  When LinuxBIOS in flash ROM and image is on compact flash without hdc1.

Case 2:
2. Any sample config file which uses ADLO payload with LinuxBIOS on
FLASHOMS.



Regards
Deepak



----- Original Message -----
From: "Steve Gehlbach" <steve at nexpath.com>
To: "Shubhangi Jadhav" <shubhangi.jadhav at patni.com>
Cc: "ron minnich" <rminnich at lanl.gov>; "Eric W. Biederman"
<ebiederman at lnxi.com>; "Deepak Kotian" <dkotian3 at vsnl.net>; "Adam Agnew"
<agnew at cs.umd.edu>; "bendany" <bendany at mistdl.com>;
<Linuxbios at clustermatic.org>
Sent: Monday, April 28, 2003 9:12 PM
Subject: Re: Using ADLO with Linuxbios


> Shubhangi Jadhav wrote:
> > I give the following options in my config file
> >
> > option BOOT_IDE=1
> > option IDE_BOOT_DRIVE=2
> > option ONE_TRACK=32
> > commandline root=/dev/hda2 console=ttyS0,115200 console=tty0
> > option USE_ELF_BOOT=1
> >
> > Is this correct if I want Linuxbios to directly boot the elfimage?
> > However when I try to build linuxbios using these options I get an
error-
> > file linux.bin not found. Now why does it look for this file.
> > Do I need to specify some payload in the config file. what payload is
it?
> >
>
> I believe you will see this error if you do not set "linux
> /usr/src/linux" or where ever your linux kernel source tree is.  Put
> this in, and I think this error will go away.
>
> But I should mention that I have never gotten this to boot with
> USE_ELF_BOOT=1, though I am told it should.  It has only worked for me
> using vmlinux.gin.gz, ie, direct loading a non-elf image.
>
> -Steve
>
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios