Using ADLO with Linuxbios

Deepak Kotian dkotian3 at vsnl.net
Mon Apr 28 14:04:00 CEST 2003


Sorry, I meant
> Case 1:
> 1.  When LinuxBIOS in flash ROM and image is on compact flash with
/dev/hdc1 block device and no harddisk.
>

----- Original Message -----
From: "Deepak Kotian" <dkotian3 at vsnl.net>
To: "Steve Gehlbach" <steve at nexpath.com>; "Shubhangi Jadhav"
<shubhangi.jadhav at patni.com>
Cc: "ron minnich" <rminnich at lanl.gov>; "Eric W. Biederman"
<ebiederman at lnxi.com>; "Adam Agnew" <agnew at cs.umd.edu>; "bendany"
<bendany at mistdl.com>; <Linuxbios at clustermatic.org>
Sent: Monday, April 28, 2003 11:58 PM
Subject: Re: Using ADLO with Linuxbios


> Good information.
>
>
> Can someone please stick out the config file content over here for the
> following situation,
>
> Case 1:
> 1.  When LinuxBIOS in flash ROM and image is on compact flash without
hdc1.
>
> Case 2:
> 2. Any sample config file which uses ADLO payload with LinuxBIOS on
> FLASHOMS.
>
>
>
> Regards
> Deepak
>
>
>
> ----- Original Message -----
> From: "Steve Gehlbach" <steve at nexpath.com>
> To: "Shubhangi Jadhav" <shubhangi.jadhav at patni.com>
> Cc: "ron minnich" <rminnich at lanl.gov>; "Eric W. Biederman"
> <ebiederman at lnxi.com>; "Deepak Kotian" <dkotian3 at vsnl.net>; "Adam Agnew"
> <agnew at cs.umd.edu>; "bendany" <bendany at mistdl.com>;
> <Linuxbios at clustermatic.org>
> Sent: Monday, April 28, 2003 9:12 PM
> Subject: Re: Using ADLO with Linuxbios
>
>
> > Shubhangi Jadhav wrote:
> > > I give the following options in my config file
> > >
> > > option BOOT_IDE=1
> > > option IDE_BOOT_DRIVE=2
> > > option ONE_TRACK=32
> > > commandline root=/dev/hda2 console=ttyS0,115200 console=tty0
> > > option USE_ELF_BOOT=1
> > >
> > > Is this correct if I want Linuxbios to directly boot the elfimage?
> > > However when I try to build linuxbios using these options I get an
> error-
> > > file linux.bin not found. Now why does it look for this file.
> > > Do I need to specify some payload in the config file. what payload is
> it?
> > >
> >
> > I believe you will see this error if you do not set "linux
> > /usr/src/linux" or where ever your linux kernel source tree is.  Put
> > this in, and I think this error will go away.
> >
> > But I should mention that I have never gotten this to boot with
> > USE_ELF_BOOT=1, though I am told it should.  It has only worked for me
> > using vmlinux.gin.gz, ie, direct loading a non-elf image.
> >
> > -Steve
> >
> > _______________________________________________
> > Linuxbios mailing list
> > Linuxbios at clustermatic.org
> > http://www.clustermatic.org/mailman/listinfo/linuxbios
>
>
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios
>





More information about the coreboot mailing list